CrawlJobs Logo

Yard Engineering Lead

airswift.com Logo

Airswift Sweden

Location Icon

Location:
Qatar , Doha

Category Icon
Category:
Energy

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

Provide engineering support to fabrication yard construction and commissioning activities, ensuring a seamless transition from engineering to fabrication/commissioning. Ensure full compliance with engineering deliverables and standardized processes, supporting the Engineering Division Manager to deliver all aspects to the highest standards. The Yard Engineering Lead will be responsible for providing expert technical guidance on-site across all engineering disciplines, ensuring compliance with international standards to enhance asset reliability and safety.

Job Responsibility:

  • Provide engineering support to fabrication yard construction and commissioning activities
  • Ensure full compliance with engineering deliverables and standardized processes
  • Provide expert technical guidance on-site across all engineering disciplines
  • Provide follow-on engineering support to the fabrication yard for construction, commissioning, and close-out of engineering activities
  • Review contractor engineering site queries and red-line markups of engineering deliverables
  • Act as the engineering interface between the fabrication site and the design office
  • Participate in key design workshops and ensure recommendations are implemented
  • Coordinate with Subject Matter Experts for endorsement of technical deviations
  • Ensure contractor follows management of change procedures for any design changes
  • Attend FATs/SATs and support field commissioning activities
  • Coordinate and develop procedures for smooth handover of equipment packages to operations
  • Ensure timely issuance of engineering deliverables to support site activities

Requirements:

  • Bachelor’s Degree in Engineering
  • Minimum 8 years of relevant engineering experience in a major project environment within the oil and gas industry
  • Broad knowledge of engineering execution including design standards, specifications, codes, safety criteria, offshore facilities design, construction, and operations
  • High proficiency in written and spoken English
  • Good knowledge of mechanical equipment, piping, pipeline, structural, instrumentation, telecom, and electrical systems

Additional Information:

Job Posted:
January 06, 2026

Icon
Airswift Sweden - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Yard Engineering Lead

New

Field Engineer

The Field Engineer position is designed to develop future field leadership throu...
Location
Location
United States , Cincinnati
Salary
Salary:
Not provided
cecoconcrete.com Logo
Ceco Concrete Construction, LLC
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associate or bachelor's degree in construction management, civil engineering, related degree, and/or one to two years of equivalent work experience
  • Internship or 1-2yrs of experience in a construction-related role is preferred
  • Basic understanding of construction processes and terminology
  • Excellent interpersonal communication skills to effectively work with all levels of the organization
  • Working knowledge of safety and relevant OSHA requirements and regulations
  • Ability to travel and work for extended periods of time on projects away from home office is required
  • Proficient in Microsoft Office Suite
  • familiarity with construction software (e.g., Procore, Bluebeam, etc.) is a plus
Job Responsibility
Job Responsibility
  • Assist in managing daily construction site operations, including scheduling, logistics, and subcontractor coordinator
  • Observe and engage with field layout team to become proficient at reading, comparing, and understanding all disciplines of drawings and gain knowledge of RFI process and layout equipment
  • Shadow Assistant Superintendents to gain better understanding of formwork installation, crew management, scheduling, and building processes
  • Work alongside various crews to learn basic manpower planning for framing, decking, stripping, columns, and walls
  • Attend and contribute to daily site meetings, toolbox talks, and coordination meetings with customers and suppliers
  • Learn construction management software and systems used for scheduling, RFIs, submittals, and documentation
  • Participate in multiple training sessions with Ceco’s Safety, Formwork Engineering, and Yard Management teams and perform functions of each team
  • Partner with Job Superintendents to increase knowledge of crew management, resources sharing, and customer management
  • Contribute to projects by completing daily logs, setting up concrete orders, processing new hires and payroll, and leading weekly planning meetings with crew leaders
What we offer
What we offer
  • Inclusive Medical, Dental, Vision, Accident, and Illness insurance
  • Company paid Disability and Life insurance
  • Health Savings Account contribution of up to $1,000 per year
  • 401(k) retirement savings program with a company match
  • Employee Assistance Program including discounts with major vendors & products
  • Mental and physical wellness programs
  • Competitive time off package including vacation, sick, and holiday pay
  • Career advancement opportunities with a stable well-established organization
  • Tuition reimbursement program and access to LinkedIn Learning course
  • Fulltime
Read More
Arrow Right

Field Engineer

The Field Engineer position is designed to develop future field leadership throu...
Location
Location
United States , St. Louis
Salary
Salary:
Not provided
cecoconcrete.com Logo
Ceco Concrete Construction, LLC
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associate or bachelor's degree in construction management, civil engineering, related degree, and/or one to two years of equivalent work experience
  • Internship or 1-2yrs of experience in a construction-related role is preferred
  • Basic understanding of construction processes and terminology
  • Excellent interpersonal communication skills to effectively work with all levels of the organization
  • Working knowledge of safety and relevant OSHA requirements and regulations
  • Ability to travel and work for extended periods of time on projects away from home office is required
  • Proficient in Microsoft Office Suite
Job Responsibility
Job Responsibility
  • Assist in managing daily construction site operations, including scheduling, logistics, and subcontractor coordinator
  • Observe and engage with field layout team to become proficient at reading, comparing, and understanding all disciplines of drawings and gain knowledge of RFI process and layout equipment
  • Shadow Assistant Superintendents to gain better understanding of formwork installation, crew management, scheduling, and building processes
  • Work alongside various crews to learn basic manpower planning for framing, decking, stripping, columns, and walls
  • Attend and contribute to daily site meetings, toolbox talks, and coordination meetings with customers and suppliers
  • Learn construction management software and systems used for scheduling, RFIs, submittals, and documentation
  • Participate in multiple training sessions with Ceco’s Safety, Formwork Engineering, and Yard Management teams and perform functions of each team
  • Partner with Job Superintendents to increase knowledge of crew management, resources sharing, and customer management
  • Contribute to projects by completing daily logs, setting up concrete orders, processing new hires and payroll, and leading weekly planning meetings with crew leaders
What we offer
What we offer
  • Inclusive Medical, Dental, Vision, Accident, and Illness insurance
  • Company paid Disability and Life insurance
  • Health Savings Account contribution of up to $1,000 per year
  • 401(k) retirement savings program with a company match
  • Employee Assistance Program including discounts with major vendors & products
  • Mental and physical wellness programs
  • Competitive time off package including vacation, sick, and holiday pay
  • Career advancement opportunities with a stable well-established organization
  • Tuition reimbursement program and access to LinkedIn Learning course
  • Fulltime
Read More
Arrow Right
New

Lead Completion Engineer

The Lead Completion Engineer will be responsible for the planning, coordination,...
Location
Location
Oman
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s Degree in Mechanical, Electrical, Instrumentation, or related engineering discipline
  • 10–15+ years’ experience in Systems Completion, MC/PC, and Commissioning on large-scale EPC projects
  • Strong background in offshore platforms, compression systems, utilities, and power generation facilities
  • Experience working on multi-platform complexes or integrated offshore structures is strongly preferred
  • Proficient in completions databases, certification systems, and structured completions methodology
  • Strong leadership, communication, and coordination capabilities
Job Responsibility
Job Responsibility
  • Develop the overall Systems Completion execution strategy for multiple offshore platforms and associated facilities
  • Establish system boundaries and Completion Packages covering compression modules, power generation units, utility systems, accommodation modules, flares, and bridge-linked structures
  • Determine manpower, resource loading, and scheduling requirements through all completions phases
  • Work closely with engineering, procurement, construction, quality, commissioning, and offshore operations to align all priorities and deliverables
  • Ensure all construction and installation work undergoes required inspections, checks, and tests as per the Systems Completion procedure
  • Lead the preparation and sign-off of Mechanical Completion (MC), Pre-Commissioning (PC), and Commissioning documentation
  • Monitor progress across multiple offshore facilities and ensure timely readiness for handover milestones
  • Manage interfaces with fabrication yards, offshore installation teams, subcontractors, vendors, and commissioning teams
  • Oversee punch list management, closure, and verification across all platforms and systems
  • Lead a multi-disciplinary completions team across engineering, fabrication, and offshore environments
Read More
Arrow Right

Senior Electrical Engineer – P&C Substation

We’re hiring a Protection & Control (P&C) Engineer to lead substation design pro...
Location
Location
United States , St. Louis
Salary
Salary:
Not provided
luzco.com Logo
LUZCO Technologies
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s in Electrical Engineering (ABET-accredited or NCEES-evaluated)
  • 4+ years of utility substation P&C design experience (15kV–500kV)
  • Strong knowledge of protection fundamentals, SCADA, and project management
  • Knowledge of relevant codes and standards, such as: NEC, NESC, IEEE, NEMA, and ANSI
  • Proficient in researching engineering and design issues, evaluating alternatives, making sound recommendations, and presenting findings
  • Ability to interact with a variety of individuals from various socio-economic, cultural, and ethnic backgrounds
  • Proficiency in Microsoft Office (Excel, Word)
  • Valid driver’s license and ability to travel
  • PE license or ability to obtain within one year
Job Responsibility
Job Responsibility
  • Design and review protection schemes for substation and transmission line equipment (bus, line, capacitor, transformer), including associated relay settings
  • Read, interpret, design, and engineer P&C systems for utilities up to 500kV, including one-lines, three-lines, AC/DC schematics, panel layouts, wiring diagrams, cable lists, settings, relays, and SCADA
  • Lead and mentor engineering teams
  • oversee project scopes, budgets, schedules, and estimates
  • Perform and review studies and calculations: coordination, voltage drop, fault current, CT burden and saturation, lighting, and installation planning
  • Use client-specified software and standards for system modeling and analysis
  • Ensure compliance with NEC, NESC, IEEE, NEMA, ANSI, and client-specific standards
  • Prepare engineering and construction documents: BOMs, yard layouts, section views, grounding, rigid and strain bus, raceways, and electrical details
  • Design auxiliary AC and DC power systems and develop technical specifications for major substation equipment (e.g., transformers, breakers, control houses)
  • Integrate protection, control, and monitoring systems in coordination with other engineering disciplines
What we offer
What we offer
  • Top-notch medical, dental, and vision insurance
  • 401k match
  • Paid time off
  • Fun employee recognition platform
  • Flexibility to set a routine that balances your needs and your team’s
  • PTO and Holidays
  • Tuition reimbursement for school or certifications
  • Paid time off to get involved in your community and give back
  • Weekly staff meetings (lunch included!)
  • Fully stocked kitchen
  • Fulltime
Read More
Arrow Right

Shop & Fleet Manager

The Shop & Fleet Manager is responsible for advancing the company’s safety, perf...
Location
Location
United States , Long Beach
Salary
Salary:
40.00 - 48.00 USD / Hour
subseaglobalsolutions.com Logo
Subsea Global Solutions
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Strong operational knowledge of mechanical, hydraulic, and electrical systems, including marine diesel engines, hydraulic systems, commercial diving equipment (life support systems, air compressors, etc.), marine vessels, and fleet vehicles
  • Proficient in mechanical, electrical, and hydraulic troubleshooting and repair
  • Experience with marine propulsion systems, electrical wiring and schematics, and use of diagnostic tools for equipment and engines
  • Ability to read and interpret technical manuals, drawings, and service bulletins
  • Excellent communication, organization, and problem-solving skills, with the ability to prioritize tasks effectively
  • Proven ability to work independently and to lead a team effectively, fostering collaboration and high performance among team members
  • Hands-on management approach – must be willing and able to work alongside the team on physical and technical tasks (this position is not solely desk-based)
  • Working knowledge of relevant regulatory standards and compliance procedures (OSHA safety regulations, USCG marine safety requirements, DOT rules for vehicles, ADCI diving standards, etc.)
  • Valid unrestricted driver’s license and the ability to obtain any required port/security clearances (e.g. TWIC for port access)
  • Strong computer skills, including proficiency with Microsoft Office (Word, Excel, Outlook, Office 365/SharePoint), and ability to effectively use or learn maintenance management software (e.g. MTC Pro)
Job Responsibility
Job Responsibility
  • Ensure all equipment (including diving life support systems) and vessels are maintained through proactive, preventative maintenance programs
  • Utilize SGS’s maintenance management system (MTC Pro) to schedule and track all maintenance, inspections, and compliance tasks for regional assets – including facility, vehicles, trailers, vessels, life support equipment, generators, underwater video systems, etc. – and maintain accurate logs and photographic records to verify task completion, cleanliness, and regulatory compliance. All work and documentation is tracked through MTC Pro planned maintenance system
  • Reconcile maintenance expenditures and CAPEX accounts on a monthly basis in coordination with the General Manager and Regional Accounting, maintaining budgetary control
  • Take a hands-on approach to leadership by actively participating in maintenance and repair tasks as needed. Lead by example in the shop and field, providing coaching and training to team members to ensure work is performed safely, correctly, and efficiently
  • Assign and/or perform routine maintenance on marine diesel engines (e.g. oil changes, filter replacements, belt adjustments)
  • Diagnose and repair issues in diesel engines, propulsion systems, control systems, and hydraulic systems
  • Conduct sea trials to verify repairs and ensure vessels are fully operational and seaworthy
  • Retrofit or upgrade engines and equipment per manufacturer guidelines and industry standards
  • Maintain detailed records of work performed, parts used, and diagnostic results for each service or repair in MTC Pro
  • Train and guide team members or vessel operators in proper engine maintenance practices and troubleshooting techniques
What we offer
What we offer
  • Health and Dental Insurance
  • 401(k) plan
  • Vacation: 10 business days earned through weekly accrual, and increased to 15 business days after 5 years of service
  • Sick Time: 5 days per calendar year
  • Holidays: 8 paid holidays per calendar year
  • Fulltime
Read More
Arrow Right

Site Process Area Construction Lead

We are looking for a Site Process Area Construction Lead for one of our clients....
Location
Location
Iraq , Basrah
Salary
Salary:
Not provided
lobelia.earth Logo
Lobellia
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Diploma/Degree in electrical and instrumentation disciplines
  • Minimum 10-15+ years of experience in Oil & Gas Industry or Heavy industries with similar large scale projects and context in Contract, Engineering and Construction activities for Onshore (or Onshore yards) projects
  • Proven track records of several successful assignments on similar site positions
  • Broad and versatile (disciplines wise) technical experience across all aspects of major Surface Facilities project development
  • Sound knowledge and experience in Engineering and Project Control for Onshore and Nearshore projects is considered a plus
  • Vast and concrete knowledge of monitoring of large Oil & Gas EPC Contractors at site
Job Responsibility
Job Responsibility
  • Ensure that CPY Policies, rules, guidelines and procedure are enforced at Site
  • Ensure short/medium term monitoring of Contractors activities under his area of supervision up to pre-commissioning
  • Provide continuous, reliable and relevant reporting to the upper management
  • Be continuously aware of what information and decision have respectively to be shared with or made by the upper management
  • Be exemplary when it comes to H3SE, engagement with Stakeholders and ethics matters. Make sure that other CPY Site team members behave in the same way
  • Fulltime
Read More
Arrow Right

Site Tanks & Inlet Facilities Area Construction Lead

We are looking for a Site Tanks & Inlet Facilities Area Construction Lead for on...
Location
Location
Iraq , Basrah
Salary
Salary:
Not provided
lobelia.earth Logo
Lobellia
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Diploma/Degree in electrical and instrumentation disciplines
  • Minimum 10-15+ years of experience in Oil & Gas Industry or Heavy industries with similar large scale projects and context in Contract, Engineering and Construction activities for Onshore (or Onshore yards) projects
  • Proven track records of several successful assignments on similar site positions
  • Broad and versatile (disciplines wise) technical experience across all aspects of major Surface Facilities project development
  • Sound knowledge and experience in Engineering and Project Control for Onshore and Nearshore projects is considered a plus
  • Vast and concrete knowledge of monitoring of large Oil & Gas EPC Contractors at site
Job Responsibility
Job Responsibility
  • Ensure that CPY Policies, rules, guidelines and procedure are enforced at Site
  • Ensure short/medium term monitoring of Contractors activities under his area of supervision up to pre-commissioning
  • Provide continuous, reliable and relevant reporting to the upper management
  • Be continuously aware of what information and decision have respectively to be shared with or made by the upper management
  • Be exemplary when it comes to H3SE, engagement with Stakeholders and ethics matters. Make sure that other CPY Site team members behave in the same way
  • Fulltime
Read More
Arrow Right

Commissioning Lead (Telecoms)

The Hook-Up and Commissioning Telecoms Lead shall provide oversight and directio...
Location
Location
Qatar , Doha
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in applied sciences or engineering
  • 12 years’ experience with large-project commissioning in the Oil & Gas Industry
  • 3 years of experience in a supervisory role
  • Knowledge and experience in discipline Hook-Up and Commissioning delivery processes and associated project phases
  • In depth knowledge of Telecoms design
  • Advanced knowledge in fibre optic and copper cable testing, results analysis and fault-finding activities
  • Advanced knowledge of networking fundamentals, cyber security, TCP/IP, LAN/WAN
  • Advanced knowledge of Radio systems (VHF/FM/AM), Access Control, Telephony, PAGA and CCTV hook-up and commissioning
  • Experience in troubleshooting general telecoms systems
  • Knowledge of offshore facilities and structures, onshore facilities, or yard operations
Job Responsibility
Job Responsibility
  • Provide oversight and direction to the project’s main contractor, sub-contractors and vendors, during the offshore hook-up and commissioning stages
  • Collaborate and interface with the HUC team, facilities team, EPC contractor and operations personnel
  • Provide technical guidance and expertise on Telecoms Equipment principles, codes, standards and coverage for EPC workshops, inspections and site testing
  • Support the change management process for HUC execution strategies
  • Supervise the review and approval of contractor procedures, ensuring accurate documentation of redlines throughout construction, hookup, pre-commissioning, and commissioning phases
  • Validate the optimization of project delivery, ensuring readiness for asset handover to the OESS team
  • Reports to Hook-Up and Commissioning Head
  • Support EPC PMT by reviewing critical documents and reports generated by the main subcontractor
  • Attend workshops/review meetings when requested
  • Analyse technical proposals and proposed deviations, assess exceptions and new technologies to ensure compliance with QELNG policies and procedures
  • Fulltime
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy