Wiring and Harness Engineer Jobs

Senior Manufacturing Engineer, Harnessing & Wiring

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , Santa Clara

Salary:

122880.00 - 166800.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, Aerospace Engineering, Mechanical Engineering (or equivalent experience)
Minimum of 6+ years of experience in Harnessing & Wiring design, installation, and manufacturing within the aerospace industry
Experience in an environment tied to FAA-certified aircraft
Experience with production systems design and optimization, particularly in relation to wire harness installation in aircraft
Experience with thermoset carbon fiber prepreg materials and the integration of electrical components into composite structures
Proven experience working with external suppliers and contract manufacturers to support low-rate initial production and high-rate scaling
Excellent problem-solving skills with a strong ability to anticipate potential issues and develop effective solutions
Strong communication skills to collaborate with internal teams, external suppliers, and regulatory bodies
Detail-oriented with a focus on process documentation and compliance

Job Responsibility

Design Production Systems: Develop a comprehensive production system concept for the installation of wire harnesses in our aircraft assembly line, considering the use of supplier-fabricated structural assemblies
Collaborate with Suppliers: Coordinate with external suppliers to identify opportunities for pre-installing harness standoffs and supports and determine which harnesses, if any, should be pre-installed during the fabrication of structural assemblies
Process Optimization: Establish and document processes, guidelines, and standards to streamline the installation of wire harnesses, making the process faster, easier, and safer. Identify preferred installation components and methods
Damage Mitigation and Repair: Anticipate potential types of damage to wiring harnesses during production and develop mitigation strategies and repair procedures to ensure the integrity and safety of the installation
Adapt to High-Rate Production: Plan for production rate increases, analyzing how the production system will need to change to accommodate higher volumes over time
Support Certification Efforts: Create process documents, guidelines, and standards required to support the FAA certification efforts and maintain compliance with all regulatory requirements
Continuous Improvement: Identify and implement opportunities for continuous improvement within the EWIS production process to enhance quality, reduce costs, and increase efficiency

Fulltime

New

Electronics & Wire Harness Engineer

A leading global aerospace organisation is seeking an Electronics Production & T...

Location

New Zealand , Christchurch

Salary:

49000.00 - 69000.00 EUR / Year

NewSpace Technical

Expiration Date

Until further notice

Requirements

2+ years in an electronics design, test, or manufacturing engineering role
Bachelor’s degree in Electrical or Mechatronics Engineering (or equivalent professional experience)
Experience with ECAD tools (Altium, KiCAD), 3D CAD (SolidWorks, Fusion360, OnShape, or CATIA), and wire harness tools (e.g., RapidHarness)
Strong Python programming skills and Git version control experience
Proficient with Windows and/or Linux systems
Understanding of automated electronics test equipment and principles
Strong documentation skills and clear technical communication
Must be eligible for a New Zealand work visa

Job Responsibility

Manage the end-to-end production process for electronics and wire harnesses
Develop, commission, and maintain production hardware and software
Diagnose and resolve complex electrical, software, and electromechanical issues
Build and maintain end-of-line and environmental acceptance tests
Oversee documentation, procedures, and quality standards for internal and external manufacturing
Collaborate with contract manufacturers to ensure aerospace-grade output
Support technicians with new production processes, tooling, and equipment introduction

What we offer

Relocation Support
Benefits

Fulltime

New

Senior Electrical Harness Engineer

We are seeking a Sr Electrical Harness Engineer to join our team in Mountain Vie...

Location

United States , Mountain View

Salary:

180000.00 - 225000.00 USD / Year

Kodiak Robotics

Expiration Date

Until further notice

Requirements

BS or MS, or equivalent experience in Electrical or Mechanical Engineering
5+ years of hardware development experience, ideally within the automotive, aerospace or a related industry
Deep understanding electrical harness designs
Troubleshooting skillset
Familiarity with IPC quality standards
Experience with implementation and on-vehicle debugging of low level hardware buses such as CAN and Ethernet
Hands on. You are just as comfortable getting your hands dirty analyzing a subsystem in the shop as when using a keyboard.
Great communicator. You have experience writing clear, concise, and detailed documentation

Job Responsibility

Be a core member on the Electrical Engineering team responsible for designing high quality harnesses assemblies for a system that includes high speed, low voltage, and high power requirements
Design and validate custom automotive harnesses that are critical to the operation of our autonomous vehicle
Responsible for working with our external partners for harness manufacturing
Develop wire harness schematics and harness diagrams
Responsible for harness BOM, component selection, and harness
Familiar with automated tools for harness validation
Own full lifecycle of harness design, including technical reviews, trade studies, outsource cable manufacturing, test, and product release
Lead root cause analysis and resolve issues in electrical systems
Interface closely with other teams such as Software, Mechanical, Manufacturing, and with external suppliers

What we offer

Competitive compensation package including equity and biannual bonuses
Excellent Medical, Dental, and Vision plans through Kaiser Permanente, Anthem, and Guardian (including a medical plan with infertility benefits)
Flexible PTO and generous parental leave policies
Office perks: dog-friendly, free catered lunch, a fully stocked kitchen, and free EV charging
Long Term Disability, Short Term Disability, Life Insurance
Wellbeing Benefits - Headspace, One Medical, Gympass, Spring Health
Fidelity 401(k)
Commuter, FSA, Dependent Care FSA, HSA
Various incentive programs (referral bonuses, patent bonuses, etc.)

Fulltime

New

Electrical Engineering Technician

At Prodrive we believe there’s no limit to what can be achieved when the brighte...

Location

United Kingdom , Banbury

Salary:

Not provided

Prodrive

Expiration Date

Until further notice

Requirements

Strong motorsport understanding of electrical systems
In-depth knowledge of motorsport (System 25) and Automotive wiring components, tooling and build practices
Basic understanding of various communication protocols such as CAN, LIN & Ethernet
Fluent in the use of computers and Microsoft Office Suite
Effective spoken and written communication skills
Ability to operate both independently and in a collaborative, team environment
Excellent organisation, prioritisation, and coordination skills
Ability to work effectively and thrive in a fast-paced environment
Ability to work under pressure
Willingness to travel and support cars on event or test

Job Responsibility

Assist with the design of electrical systems both on and off vehicle (harnesses, sensors, control units)
Build of development wiring harness and bench testing equipment, including Lab-cars and HIL Rigs
First build of pre-production harnesses
Diagnosis of electrical faults, working through problems methodically
Produce documentation (internal and customer facing) to assist with electrical installations
Defining requirement, specifying, and implementing electrical hardware
Liaising with other departments and customers to support the build and testing of parts, systems, and vehicles
Support onsite car build with troubleshooting of electrical and electronic issues
Support events (Race and Rally) when required
Creation and use of Cirris CH2 HIL Test routines

What we offer

An attractive salary which will grow in line with your ongoing development and impact
25 days holiday (which increases with long service) with an opportunity to purchase up to 15 extra days
Training opportunities for continuing professional development
Onsite subsidised staff restaurant
Car and pension salary sacrifice schemes
Cyclescheme
Exercise classes
Paid time off for volunteering
Consultations with our Fit 4 Life expert
Social events throughout the year

Fulltime

New

Senior Electrical Engineer

We are seeking a Senior Electrical Engineer with a strong foundation in system-l...

Location

United States , Mountain View

Salary:

144000.00 - 153000.00 USD / Year

Cyngn

Expiration Date

Until further notice

Requirements

2-4 years of electrical engineering experience in production hardware development
Strong generalist background across multiple areas of electrical engineering (PCB, harness, system integration)
Proven expertise with PCB design, including schematic capture, layout, and DFM best practices
Experience with wiring harness design, particularly using Rapid Harness or similar tools
Familiarity with Arena PLM or equivalent systems for configuration and release management
Working knowledge of functional safety design principles and relevant standards (ISO-26262, IEC-60335)
Experience working with high-speed digital interfaces and multiple communication protocols
Familiarity with EMC/EMI compliance testing and design considerations
Strong communication and documentation skills
Ability to own designs end-to-end—from architecture through production release

Job Responsibility

Drive system-level electrical architecture, defining electrical needs, interface points, and integration strategies across subsystems
Design and deliver PCBAs, wiring harnesses, and complete system schematics from concept to production
Perform schematic capture, layout, and documentation using Altium Designer
Develop and document wiring harness designs using Rapid Harness, ensuring signal integrity, topology control, and manufacturability
Work with high-speed interfaces (>1 Gbps) and communication protocols, including I2C, I3C, I2S, GMSL, MIPI-CSI2, Ethernet, CAN, SPI, SSI, and various analog layers
Use structured risk management tools such as NUDD and FMEA to identify and mitigate design risks early
Define and execute Acceptance Test Plans (ATPs) for electrical validation, qualification, and production release
Apply best practices for battery-powered EV architectures, including EMC/EMI compliance and regulatory testing
Manage and release documentation through Arena PLM, ensuring configuration control and traceability
Translate system requirements into actionable design deliverables and manage schedule commitments

What we offer

Health benefits (Medical, Dental, Vision, HSA and FSA (Health & Dependent Daycare), Employee Assistance Program, 1:1 Health Concierge)
Life, Short-term and long-term disability insurance (Cyngn funds 100% of premiums)
Company 401(k)
Commuter Benefits
Flexible vacation policy
Sabbatical leave opportunity after 5 years with the company
Paid Parental Leave
Daily lunches for in-office employees and fully-stocked kitchen with snacks and beverages
Monthly meal and tech allowances for remote employees

Fulltime

New

Harness Integration Technician, Quick Turn

Figure is an AI robotics company developing autonomous general-purpose humanoid ...

Location

United States , San Jose

Salary:

30.00 - 45.00 USD / Hour

Figure

Expiration Date

Until further notice

Requirements

2+ years building wire harnesses/cable assemblies in a prototype or low-volume manufacturing environment
Proven ability to deliver high-quality cables on tight deadlines with minimal supervision
Strong crimping and soldering skills (selective tinning, shields/drain wires, coax/twisted pair)
Hands-on with strippers, gauges, pull testers, manual/pneumatic crimpers, soldering stations, and heat guns
Working knowledge of IPC/WHMA-A-620 (Class 2/3) and familiarity with J-STD-001
Comfortable reading prints, schematics, BOMs, work orders, and ECOs
disciplined about documentation and traceability

Job Responsibility

Rapidly build custom cables and harnesses (cut, strip, crimp, solder, braid/sleeve, heat-shrink, basic potting, final terminations) from drawings/BOMs/work orders
Turn around urgent requests in hours or days while maintaining quality
coordinate closely with engineering for last-minute tweaks
Crimp and verify terminals/contacts (TE/AMP, Molex, JST, Amphenol/LEMO, etc.) using specified tooling
perform and log pull tests when required
Print/apply labels and heat-shrink markers
ensure traceability in ERP or router system
Perform continuity and insulation/hipot tests
troubleshoot with DMMs and cable testers
Execute rework/modifications to spec (IPC/WHMA-A-620) and support NCMR/MRB containment

Fulltime

New

Design Release Engineer, HV Systems

This role will take ownership of the electrical distribution system design from ...

Location

United States , Garden Grove

Salary:

55.00 - 65.00 USD / Hour

Harbinger Motors

Expiration Date

Until further notice

Requirements

Possess a Bachelor's degree or other relevant educational credential
Experience in Catia v6 software is a significant plus
Knowledge of industry standards and best practices related to wire harness, power distribution, etc.
Strong problem-solving skills with the ability to effectively communicate and collaborate within a dynamic team environment
Experience working on High Voltage systems for Electric Vehicles

Job Responsibility

Lead the design and release of high-voltage (HV) wiring harnesses for vehicle propulsion and energy systems, including cables, connectors, shielding, and protective coverings
Collaborate closely with powertrain, battery, thermal, chassis, and body teams to ensure proper routing, packaging, and mechanical integration of all HV harnesses
Generate and maintain EDS (Electrical Distribution System) schematics, 3D models, detailed drawings, and bills of materials
Manage suppliers to define component specifications, support prototype builds, and production readiness
Manage engineering releases and updates through Harbinger’s PLM system, ensuring design traceability and configuration control
Contribute to design guidelines, best practices, and process improvements for future HV architecture programs
Support prototype wiring fabrication and DV / PV testing (component, system & vehicle level)
Work with domain experts and supply chain team members to select and integrate electrical components
Support wire harness integration in Catia v6 to support CAE and DFM activities

Fulltime

New

Component Test Technician

The Component Test Engineering team is looking for a technician with experience ...

Location

United States , Garden Grove

Salary:

30.00 - 35.00 USD / Hour

Harbinger Motors

Expiration Date

Until further notice

Requirements

High-voltage electrical testing experience
Operating bi-directional power supplies and electrical loads
Building special wiring harnesses from scratch
including soldering, crimping, etc.
Building test-stands and test-fixtures

Job Responsibility

Assist the engineering staff with test setups, execution, and teardown
Occasionally travel to external test facilities to set up and/or execute tests
Fabricate test fixtures, make wiring harnesses and support other lab activities
Operate a forklift (training will be provided, if needed)
Maintaining lab inventory for consumables
Maintaining a clean lab environment

Fulltime

Wiring and Harness Engineer

Priamba

Location:
United States, Greensboro

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
December 11, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Wiring and Harness Engineer