Utility Technician – Final Assembly Job at KP Staffing (Fort Worth)

Assembly Technician I

iAutomation, a high technology distributor of industrial automation components, ...

Location

United States , Franklin

Salary:

Not provided

iAutomation

Expiration Date

Until further notice

Requirements

High School Education or GED
Some manufacturing experienced desired
Basic print reading and experience in wire dressing and termination
Proficient in reading and measuring using a tape measure
Operate hand pallet jacks to move material within plant
Able to lift, squat, bend, reach, and stand as work requires
Work involves frequent lifting of materials and product up to 30 pounds
Frequent use of hand tools
Long periods of standing

Job Responsibility

Mechanical assembly of extrusion frames
Minimal electro-mechanical assembly using proper grounding techniques
Following work instructions, perform repetitive assembly operations
Produce quality work to specified time standards
Execute in-process checks using visual inspection and check lists
Possess an aptitude for cross functional training to reduce takt time
Utilize a variety of hand tools such as screw drivers, hex keys, drills, saws, tape measures and fixtures
Coordinating with teammates participate in manually integrating large subassemblies to complete a final assembly
Willingness to work overtime as needed

Fulltime

Assembly Technician I

iAutomation, a high technology distributor of industrial automation components, ...

Location

United States , Fond du Lac

Salary:

Not provided

iAutomation

Expiration Date

Until further notice

Requirements

High School Education or GED
Some manufacturing experienced desired
Basic print reading and experience in wire dressing and termination
Proficient in reading and measuring using a tape measure
Operate hand pallet jacks to move material within plant
Able to lift, squat, bend, reach, and stand as work requires
Work involves frequent lifting of materials and product up to 30 pounds
Frequent use of hand tools
Long periods of standing

Job Responsibility

Mechanical assembly of extrusion frames
Minimal electro-mechanical assembly using proper grounding techniques
Following work instructions, perform repetitive assembly operations
Produce quality work to specified time standards
Execute in-process checks using visual inspection and check lists
Possess an aptitude for cross functional training to reduce takt time
Utilize a variety of hand tools such as screw drivers, hex keys, drills, saws, tape measures and fixtures
Coordinating with teammates participate in manually integrating large subassemblies to complete a final assembly
Willingness to work overtime as needed

Fulltime

Assembly Technician I (Cables)

iAutomation, a high technology distributor of industrial automation components, ...

Location

United States , Franklin

Salary:

Not provided

iAutomation

Expiration Date

Until further notice

Requirements

High School Education or GED
Some manufacturing experienced desired
Basic print reading and experience in wire dressing and termination
Proficient in reading and measuring using a tape measure
Operate hand pallet jacks to move material within plant
Able to lift, squat, bend, reach, and stand as work requires
Work involves frequent lifting of materials and product up to 30 pounds
Frequent use of hand tools
Long periods of standing

Job Responsibility

Mechanical assembly of extrusion frames
Minimal electro-mechanical assembly using proper grounding techniques
Soldering application, custom cable terminations
Following work instructions, perform repetitive assembly operations
Produce quality work to specified time standards
Execute in-process checks using visual inspection and check lists
Possess an aptitude for cross functional training to reduce takt time
Utilize a variety of hand tools such as screw drivers, hex keys, drills, saws, tape measures and fixtures
Coordinating with teammates participate in manually integrating large subassemblies to complete a final assembly
Willingness to work overtime as needed

Fulltime

Sr. Electrical Engineer, Sustaining

As a member of the TASER Electrical Engineering Sustaining team, you will be res...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering or similar engineering discipline
Six years of industry experience in electronics design and sustaining for mass-produced, handheld, embedded, battery-powered consumer devices
Expertise in identifying and implementing alternative electronic components or circuit design modifications to enhance performance, address obsolescence, and optimize supply chain efficiency for released mass-production electronics
Proficient in executing design changes across bill of materials, schematics, and layouts to support identified product changes/updates
Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDOs), microcontrollers, memory subsystems (FLASH, EEPROM), switches, connectors, communication interfaces (SPI, UART, I2C), indication LEDs, displays, LASERs, electromechanical transducers, hall effect sensors, inertial measurement units, accelerometers, protection circuitry (ESD, voltage, and current limiting components), discrete resistors/capacitors/inductors, rechargeable batteries and charging/balancing circuitry, RF subsystems (BLE, WiFi) for flex, rigid, and rigid-flex PCB designs
Strong hands-on expertise in electronics verification, characterization, and failure analysis, utilizing lab equipment such as oscilloscopes, power supplies, multimeters, custom test jigs and software related tools
Experience collaborating with laboratory technicians on circuit and component rework. Skilled in coordinating or performing component replacement and rework
hands-on soldering skills are a strong plus. Knowledgeable in rework processes, with the ability to execute directly or manage internal and external rework activities
Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired

Job Responsibility

Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics associated with TASER devices and accessories
Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
Execute bench-level verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, power supplies, multimeters, logic analyzers, and custom related test equipment and software tools
Perform debugging, failure analysis, and rework of electronic systems, circuits, and components to identify and confirm root cause of issues associated with updated design changes or RMA returns. This includes close collaboration with the failure analysis team to conduct CT scans on suspect assemblies and the use of functional circuit testers in production to validate final issue resolution
Using OrCAD schematic design tools, improve or modify embedded mixed-signal electronic circuitry that integrates high voltage power supply circuitry, microcontrollers, flashlight/indication/display/LASER circuitry and drivers, memory devices (FLASH/EEPROM), switch-mode and linear power supplies, batteries, high-speed and low-speed data interfaces, electromechanical transducers, and other discrete digital and analog components for flex, rigid, and rigid-flex PCB designs
Partner with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro and other layout tools
Develop test methods, execute system and component-level verification, and lead test planning efforts to evaluate electronics design changes
Team with validation and other engineering teams to evaluate and document design update outcomes, test results, and related information, then present findings to management for review and further action
Update and help to finalize assembly drawings, bill of materials, Geber files, and other design documentation needed to support updated design change releases
Knowledge sharing, mentoring, and close collaboration with other team members and departments

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs
snacks in our offices

Fulltime

Final Integration Technician

KP Staffing is now hiring a final integration technician in the Sugar Land area!...

Location

United States , Sugar Land

Salary:

20.00 USD / Hour

KP Staffing

Expiration Date

Until further notice

Requirements

Clean background required
Ability to pass a drug screen and E-Verify
High School diploma or GED
5+ years of experience in manufacturing
Knowledge of AC/DC voltage is required
Ability to operate voltmeters, hand, and power tools
Ability to read and interpret blueprints, drawings, etc
Be able to lift/push/carry a minimum of 50 lbs

Job Responsibility

Integrating control and solar panels into their enclosures and shelters
Utilizing hand and power tools along with machines and measuring equipment
Read work orders, blueprints, and instructions to ensure the panels are being enclosed correctly
Assembly, configuration, and integration of high-end electronic equipment
Installation and testing of low-voltage wiring

Fulltime

R&D Mechanical Lab Technician

Conduct basic and applied physical tests in a controlled test environment to rep...

Location

United States , North Kingstown

Salary:

27.00 - 32.00 USD / Hour

ASC Engineered Solutions

Expiration Date

Until further notice

Requirements

Associate’s degree in a technical discipline
or two years of related experience
or an equivalent combination of education and experience
General familiarity with mechanical products, systems, and assemblies
Ability to work efficiently, exercise strong discipline, and focus on safety
Ability to communicate effectively
Desire for continuous improvement and willingness to pursue ongoing training
Proficiency in Microsoft Word and Excel

Job Responsibility

Follow standard procedures to conduct testing of products by operating manual and automatic laboratory equipment including, but not limited to, environmental chambers, pressure test machines, tensile testers, hydraulic power units, helium leak detectors and mechanical cycle testers
Read and interpret test plans and procedures and determine test set-up
Design, fabricate and assemble tooling to adapt test samples into test equipment and measurement devices
Perform failure mode analysis, photograph results and compile data into clear, concise and repeatable multi-media reports
Provide resource estimates of non-routine work to lab management and product development teams and follow through to meet the commitments
Work with other technicians and personnel to meet program requirements
Use computerized and analog data acquisition methods to collect data and give feedback to Design and Engineering to finalize plans and procedures
Maintain equipment and perform preventative maintenance
Perform all functions is accordance with ISO and UL DAP requirements
Work to support continual process and capability improvement

Fulltime

Plant Senior Project Engineer

This individual will be responsible for the planning and design of water pumping...

Location

Salary:

Not provided

DCS Engineering

Expiration Date

Until further notice

Requirements

B.S. in Civil Engineering
Professional Engineer License in the State of Texas or ability to obtain Texas license within 6 months of hire
7+ years of progressive experience in civil engineering focused on water and wastewater treatment facilities
Detail oriented with tendency to adhere to established procedures
Ability to multi-task, prioritize, interact, and complete duties on schedule
Must be organized and able to work with minimal supervision
Practiced in task management including follow-up and follow-through
Ability to articulate technical skills and ideas both visually and contextually
Practiced in technical writing and communication skills
The candidate should be a self-starter and results-oriented

Job Responsibility

Execute multiple simultaneous projects from conceptual design, through final design, and submittal reviews during construction
Manage budgets and schedules on assigned projects and/or being performed by direct reports
Manage critical path schedules for projects including obtaining required design information from external agencies such as private utility companies, public information requests, and regulatory agencies
Prepare conceptual designs to assist clients in defining project scope including but not limited to site layouts, preliminary cost estimating, schedule formation, agency review identification, and manhour estimates to establish fee needed to complete the work
Independently create layouts, detailed designs, plans, specifications and estimates for pipelines, pump stations, treatment plants, tanks and other water and wastewater storage and conveyance systems
Engineering/process design, project coordination, determining and writing engineering specifications, planning work, establish appropriate design methods, report preparation and coordination, equipment sizing and selection and working directly with the owner
Calculate and prepare engineering documents for respective engineering discipline, including details, schedules and cost estimates for projects, performing life cycle cost analyses, performing hydraulic analysis calculations and developing hydraulic profiles, and coordinating with CADD technicians for construction plan production
The selection and application of engineering systems and materials in accordance with the latest governing codes applicable to the project type will be required
Lead equipment and supplier selection
Work with subconsultants and other outside entities to obtain necessary design information and keep project on schedule including but not limited to preparing subconsultant scope of work, coordinating with subconsultants to prepare contracts and fees, managing subconsultants during design, and problem solving and communicating with subconsultants as issues arise

New

Safety Intern

Join Lhoist North America’s dynamic internship program and gain hands-on experie...

Location

United States , Calera

Salary:

Not provided

Lhoist

Expiration Date

Until further notice

Requirements

Strong analytical skills
Open to feedback and eager to learn
Proactive and positive approach to work
Effective communication skills, both oral and written
High learning agility
English is mandatory
Willingness to travel if necessary

Job Responsibility

Tackle Real Projects: Dive into projects outlined by management and be ready to adapt to new challenges
Learn and Grow: Seek out work and learning opportunities proactively
Communicate Like a Pro: Engage with various levels of the organization and keep your manager/mentor updated on your progress
Improve Processes: Work efficiently and effectively to help improve processes at your location
Embrace Our Culture: Live our values of Respect, Integrity, and Courage. Work safely, especially around heavy equipment, and be a valued team member
Showcase Your Work: Present your project overview to Senior Leaders and local management at the end of the program
Stay Curious: Be eager to learn new skills and participate in all intern program activities (orientation, mid-term session, closing session, etc.)
Get There: Ensure you can transport yourself to and from the work location
And More: Take on other duties as assigned

What we offer

Comprehensive medical, dental, vision, life, and disability insurance
Paid vacation and sick time
Attractive 401(k) Retirement Savings Plan with a generous Employer Match
Supplemental Contribution based on your Years of Service
Educational assistance

Fulltime

Utility Technician – Final Assembly

KP Staffing

Location:
United States , Fort Worth

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 03, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Utility Technician – Final Assembly

Assembly Technician I

Assembly Technician I

Assembly Technician I (Cables)

Sr. Electrical Engineer, Sustaining

Final Integration Technician

R&D Mechanical Lab Technician

Plant Senior Project Engineer

Safety Intern

Utility Technician – Final Assembly

KP Staffing

Location:United States , Fort Worth

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 03, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Utility Technician – Final Assembly

Assembly Technician I

Assembly Technician I

Assembly Technician I (Cables)

Sr. Electrical Engineer, Sustaining

Final Integration Technician

R&D Mechanical Lab Technician

Plant Senior Project Engineer

Safety Intern

Location:
United States , Fort Worth

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
January 03, 2026