CrawlJobs Logo

UAS Technician

tekever.com Logo

Tekever

Location Icon

Location:
United Kingdom , West Wales

Category Icon
Category:
IT - Administration

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

The UAS Technician is responsible for the inspection, maintenance, repair, integration, and testing of Unmanned Aerial System (UAS) platforms and associated support equipment, ensuring all work meets technical, safety, and regulatory requirements.

Job Responsibility:

  • Perform assembly, disassembly, and integration of UAS airframes and sub-systems
  • Conduct structural inspections on composite, metallic, and hybrid structures
  • Carry out composite repairs (skins, cores, bonded structures, inserts, doublers)
  • Install and torque mechanical fasteners in accordance with engineering drawings
  • Perform rigging, alignment, and mechanical system adjustments
  • Identify and report structural defects, damage, or non-conformities
  • Install, wire, and troubleshoot avionics systems including: Flight control systems, Autopilots and navigation systems, Power distribution systems, Sensors and payload interfaces
  • Manufacture and repair wiring looms/harnesses to approved standards
  • Conduct continuity, insulation resistance, and functional electrical testing
  • Integrate communication systems, antennas, and RF components
  • Support software/firmware loading and system configuration when required
  • Conduct ground tests and system functional checks
  • Support engine/motor installation and functional verification
  • Assist in vibration, endurance, or environmental testing activities
  • Record and interpret test data as required
  • Support flight readiness inspections and pre/post-flight checks
  • Work in accordance with: Engineering drawings, Work instructions, Maintenance manuals, Quality procedures
  • Accurately complete job cards, maintenance records, and test documentation
  • Raise non-conformance reports (NCRs) where required
  • Ensure configuration control of parts and assemblies
  • Maintain traceability of components and materials
  • Diagnose mechanical, electrical, and system faults
  • Use test equipment (multi-meters, oscilloscopes, torque tools, etc.) correctly
  • Replace, repair, or modify components in line with approved data
  • Support root cause investigations and corrective actions
  • Maintain professional standards and attention to detail
  • Support continuous improvement initiatives
  • Stay current with technical skills and training
  • Demonstrate accountability for workmanship quality

Requirements:

  • Degree or certification in STEM fields (e.g., engineering, electronics, robotics)
  • Proven experience in avionics maintenance or UAV systems
  • Self-motivated and adaptable with strong problem-solving skills
  • Clean driving license and ability to obtain security clearance
  • Excellent communication skills and attention to detail

Nice to have:

  • Familiarity with UAV flight controllers, sensors, GPS modules, and software updates
  • Hands-on experience with diagnostics tools and soldering/board-level repairs
  • Ability to read technical schematics and troubleshoot complex systems
  • Knowledge of flight safety and regulations desired but not essential
  • Comfortable working in field-based environments under varying conditions
What we offer:
  • An excellent work environment and an opportunity to make a difference
  • Salary Compatible with the level of proven experience

Additional Information:

Job Posted:
February 17, 2026

Employment Type:
Fulltime
Icon
Tekever - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for UAS Technician

New

UAS Operator

We are seeking an experienced UAS Operator to support Strategic Development and ...
Location
Location
United States
Salary
Salary:
Not provided
tekever.com Logo
Tekever
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Current FAA Part 107 Remote Pilot Certificate
  • Minimum 2 years of professional UAS flight experience
  • Minimum 1 year of hands-on aircraft or UAS maintenance experience
  • Experience supporting U.S. Government customers
  • Proven experience delivering UAS pilot instruction and formal evaluations
  • Operational experience on Group 2 and Group 3 UAS platforms
  • Strong leadership, mentoring, and organizational skills
  • Sound aeronautical judgment and decision-making skills
  • Willingness to travel domestically and internationally, including short-notice deployments
  • Valid U.S. driver’s license
Job Responsibility
Job Responsibility
  • Serve as Remote Pilot in Command (RPIC) in compliance with Federal Aviation Administration Part 107 regulations and company procedures
  • Plan, execute, and debrief flight operations to the highest safety and operational standards
  • Conduct operational site surveys, risk assessments, and pre-deployment briefings
  • Support deployments, including operations in remote or austere environments
  • Ensure UAS aircraft are maintained in a safe, airworthy, and mission-ready condition
  • Perform and oversee pre- and post-flight inspections per approved procedures
  • Ensure maintenance follows manufacturer guidance and regulatory requirements
  • Maintain accurate and compliant maintenance and operational records
  • Design, deliver, and manage training programs for Tekever UAS platforms
  • Provide pilot instruction and conduct check flights, graded evaluations, and annual proficiency assessments
What we offer
What we offer
  • Competitive base salary
  • Performance-based bonus opportunities
  • Retirement savings plan (401(k))
  • Paid time off and company holidays
  • Paid sick leave
  • Health insurance coverage
Read More
Arrow Right

Stationary Engineer

Develop your engineering career at JLL! You will work as part of an IFM & engine...
Location
Location
United States , Charleston
Salary
Salary:
33.00 USD / Hour
jll.com Logo
JLL
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • North American Technician Excellence (N.A.T.E.) Core Service plus Air Distribution Services Specialist or any service Knowledge Areas of Technician Expertise (K.A.T.E.) Specialty listed under the service category
  • HVAC Excellence Professional - the following three certifications: Light Commercial Air Conditioning, Gas Heat, and Green Awareness Certification
  • UA Star HVACR Mastery Certification
  • All HVAC personnel designated to work on, operate, maintain, and (or) repair HVAC equipment or systems shall maintain a minimum of 16 hours annually of continuing education from either a NATE, HVAC Excellence, UA Star recognized provider program or industry recognized HVAC training organization
  • A minimum of one year experience
  • High School Diploma or Equivalent
  • Candidates must be authorized to work in the United States without sponsorship
Job Responsibility
Job Responsibility
  • Operates and maintains stationary engines and mechanical equipment, air compressors, generators, motors, turbines, and steam boilers, to provide utilities, such as light, heat, or power, for buildings and industrial processes
  • Reads meters and gauges or automatic recording devices at specified intervals to verify operating conditions
  • Records data, such as observing and interpreting readings on gauges, meters, and charts which register various aspects of the system’s operation, adjusting controls to insure safe and efficient operation of the system and to meet demands for the services provided
  • Adjusts manual controls or overrides automatic controls to bring equipment into recommended or prescribed operating ranges, switch to backup equipment or systems, or to shut down equipment
  • Visually inspects equipment at periodic intervals to detect malfunctions or need for repair, adjustment, or lubrication
  • Maintains equipment by tightening fittings, repacking bearings, replacing packing glands, gaskets, valves, recorders, and gauges, and cleaning or replacing burners or other components, using hand tools and power tools
  • May oil and lubricate equipment
  • May perform water titration tests and pour chemical additives, such as water softener, into treatment tank to prevent scale buildup and to clean boiler lines
  • May record operation and maintenance actions taken during shift in operators’ logbook
  • This engineer may direct and coordinate activities of other workers (not stationary engineers) in performing tasks directly related to operating and maintaining the system or systems
What we offer
What we offer
  • 401(k) plan with matching company contributions
  • Comprehensive Medical, Dental & Vision Care
  • Paid parental leave at 100% of salary
  • Paid Time Off and Company Holidays
  • Early access to earned wages through Daily Pay
  • company uniforms
  • cell phone
  • laptop
  • free training
  • H&W
  • Fulltime
Read More
Arrow Right

Engineering Technician 2 - Integration/Software

As an Engineering Technician, you'll play a key role in supporting R&D projects ...
Location
Location
United States , Tampa
Salary
Salary:
Not provided
aevex.com Logo
AEVEX Aerospace
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Solid knowledge of Electrical and Aircraft Systems
  • Knowledge of power and mechanical systems
  • Knowledge of UAV and CUAV
  • Knowledge of Mission Planner Software (or Equivalent UAS software)
  • Knowledge of uploading GCS parameters/ settings
  • Knowledge any software coding/ scripting (Lynx, C++, TTL)
  • Knowledge on Microsoft office (Excel, Word, Power point, ect.)
  • Understanding of Electrical equipment (O-Scopes, DMM)
  • Ability to understand cable drawings
  • Collaborates effectively within teams and builds strong working relationships
Job Responsibility
Job Responsibility
  • Diagnose and troubleshoot system issues to identify faulty components
  • Conduct troubleshooting for both electrical and mechanical systems to ensure optimal performance
  • Use oscilloscopes and digital multimeters (DMM) to thoroughly test Systems
  • Solder wire harnesses and making cables based on minimal documentation
  • Assist in diagnosing and resolving technical challenges, contributing to project success
  • Configuration, troubleshooting, data analysis, and integration of a wide variety of applications and equipment such as (GPS receivers, LiDAR sensors, Inertial sensors, network routers, radio modems, meteorological sensors, serial port hubs, etc.)
  • Execute software configuration checks and validate system build states using Ground Control Station (GCS) tools and Mission Planning Software as directed
  • Work with Arduino (or Equivalent) for micro controllers
  • Work with raspberry Pi’s (or Equivalent) for different platforms and products
  • Perform software test and debugging with engineering support
What we offer
What we offer
  • 401(k)-retirement plan
  • comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company
  • professional development funds
  • an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits for qualified employees
  • Fulltime
Read More
Arrow Right

MLS Technical Specialist UA COAG

The MLS Technical Specialist participates in all departmental responsibilities f...
Location
Location
United States , Liberty
Salary
Salary:
Not provided
kansashealthsystem.com Logo
The University of Kansas Health System
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor of Science
  • High School Graduate
  • Meets the CLIA requirements for high complexity testing required
  • Medical Laboratory Scientist (MLS) - American Medical Technologists (AMT) within 180 Days
  • Medical Laboratory Technician (MLT) - American Society for Clinical Pathology Board of Certification (ASCP) within 180 Days
Job Responsibility
Job Responsibility
  • Analyzes patient, control and proficiency testing specimens and records results in a timely manner according to laboratory policy
  • Assists with departmental management tasks including, but not limited to the following: a) Maintains an adequate inventory of all supplies and reagents as assigned. b) Schedules and coordinates departmental staffing as assigned. c) Participates in departmental financial planning and oversight with the supervisor/manager. d) Contributes to content included in competency training and reviews
  • Coordinates quality assurance and quality improvement activities for the department
  • Ensures compliance with regulatory requirements and maintains a laboratory of constant readiness
  • Ensures all departmental policies and procedures are kept up to date
  • Ensures compliance with regulatory, accreditation, safety and hospital standard, policies and procedures
  • Instructs, orients and mentors students, employees, residents, patients and other health care providers as applicable
  • Completes continuing education and submits appropriate documentation where applicable
  • Oversees calibration, maintenance, troubleshooting and quality control for instrument issues in addition to the review and management of the appropriate documentation
  • Provides oversight for the review and correlation of results to each other and with the patient's condition recognizing abnormal results and critical/alert values
  • Fulltime
Read More
Arrow Right

Medical Research Associate

Medical Research Associate - Full Time - Monday - Friday - Salt Lake City, Utah ...
Location
Location
United States , Salt Lake City
Salary
Salary:
Not provided
iconplc.com Logo
iconplc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Read, write, and speak English
  • fluent in host country language required
  • High School Diploma or G.E.D. required
  • Undergraduate degree in a clinical, health-related area and/or minimum 1 year of equivalent work experience with similar position
  • 1+ years work experience in a medical or clinical field preferred
  • Basic Life Support (BLS)/Phlebotomist Certification preferred
  • Medical Assistant, Certified Nursing Assistant, Certified Medication Aide, Telemetry Technician, or Laboratory Technician preferred
Job Responsibility
Job Responsibility
  • Meet/greet clinical research volunteers as they come into the clinic
  • Check vitals (height, weight, blood pressure, BMI)
  • Ensure study participants are healthy enough to participate in the clinical trial according the protocol
  • Perform basic medical procedures according to protocol for specified study participants, including but not limited to informed consent, vital signs, Height/Weight/BMI measurements, meals, water fast, phlebotomy (straight stick/draw from IV catheters), finger stick blood sugar, ECGs, UA, UDS, urine collection, fecal collection, pulse oximetry, AE/ConMed assessment, obtain medical history and assists with Investigational Product accountability
  • Ensure all study activities/procedures (during screening and clinical procedures) are completed on schedule and in accordance with the protocol, the FDA and the IRB requirements
  • Perform non-medical activities such as distribution of scrubs, locks, DVDs, movies, games, front desk tasks (screening centre) etc
  • Monitor subject safety
  • Report equipment malfunctions and may assist with specified equipment maintenance and stocking of supplies
  • Perform general housekeeping duties as needed, including cleaning and making dorm beds, wiping down bedside tables, organizing subject resting and entertainment areas, cleaning screening exam rooms, etc
  • Assist with study setup activities and perform check-in and check-out activities
What we offer
What we offer
  • Comprehensive and competitive total reward package
  • Excellent level of base pay
  • Wide range of variable pay and recognition programs
  • Best in class employee benefits
  • Supportive policies
  • Wellbeing initiatives tailored to support you and your family at all stages of your career
  • Various annual leave entitlements
  • A range of health insurance offerings to suit you and your family’s needs
  • Competitive retirement planning offerings
  • Global Employee Assistance Programme, LifeWorks, offering 24-hour access to a global network of over 80,000 independent specialized professionals
  • Fulltime
Read More
Arrow Right

Sr Commissioning Manager, Electrical

Crusoe's mission is to accelerate the abundance of energy and intelligence. We’r...
Location
Location
United States , Cheyenne; Denver; Abilene; Amarillo
Salary
Salary:
Not provided
crusoe.ai Logo
Crusoe
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering, Controls Engineering, Computer Science, or related discipline (Master’s or relevant certifications a plus)
  • Hands-on professional experience with Inductive Automation Ignition (Designer, Perspective, Vision, scripting, SQL integration, reporting)
  • Proven ability to build scalable, maintainable automation projects and custom UIs in a production environment
  • Background in BMS/EPMS, SCADA, or ICS systems, ideally in data center or other mission-critical facilities
  • Familiarity with control protocols such as BACnet, Modbus, OPC-UA, MQTT, and integrating diverse building systems into a unified platform
  • Strong knowledge of HVAC, electrical systems, PLC/DDC logic, and industrial automation concepts
  • Demonstrated ability to translate operational needs into intuitive UI/UX solutions for non-technical users
  • Excellent communication skills for collaborating with engineers, contractors, and leadership stakeholders
  • Track record of solving complex automation challenges with innovative and data-driven solutions
  • Passion for leveraging data visualization and automation to improve system performance and user experience
Job Responsibility
Job Responsibility
  • Lead the design and development of Ignition-based automation and visualization solutions for data center BMS/EPMS systems, ensuring seamless integration with HVAC, electrical, and monitoring infrastructure
  • Develop intuitive UI dashboards, HMIs, and operator workflows that make complex building and power systems easy to monitor and control
  • Build and maintain automation scripts, tags, templates, and reporting modules in Ignition to streamline commissioning, testing, and operations
  • Collaborate with engineers, contractors, and OEM partners to scope, configure, and deploy Ignition projects that tie into BACnet, Modbus, OPC-UA, and MQTT protocols
  • Conduct system testing and simulation to validate UI functionality, data accuracy, and operational performance prior to live deployment
  • Leverage Ignition to collect and visualize real-time and historical data, enabling performance insights, fault detection, and predictive maintenance
  • Optimize existing BMS/EPMS user interfaces to improve operator experience, reduce alarm fatigue, and accelerate troubleshooting
  • Provide leadership with actionable dashboards and automated reports on system health, uptime, energy efficiency, and capacity utilization
  • Mentor and train technicians and engineers on Ignition development best practices, scripting (Python/Jython), and UI customization
  • Ensure all Ignition and BMS/EPMS implementations comply with industry standards, cybersecurity best practices, and Crusoe’s sustainability goals
What we offer
What we offer
  • Competitive industry pay and equity (RSUs) in a fast-growing, well-funded technology company
  • Comprehensive health, dental, and vision insurance with multiple plan options
  • Employer contributions to HSA accounts
  • Paid parental leave
  • Company-paid life, short-term, and long-term disability insurance
  • 401(k) with 100% company match up to 4% of salary
  • Generous PTO and holiday schedule
  • Tuition reimbursement and professional development support
  • Cell phone reimbursement, Calm app subscription, and commuter benefits ($300/month)
  • Fulltime
Read More
Arrow Right

Sr Instrumentation & Controls Engineer

Crusoe's mission is to accelerate the abundance of energy and intelligence. We’r...
Location
Location
United States , Cheyenne
Salary
Salary:
Not provided
crusoe.ai Logo
Crusoe
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering, Controls Engineering, Computer Science, or related discipline (Master’s or relevant certifications a plus)
  • Hands-on professional experience with BMS platforms and development (programming, graphics, scripting, SQL integration, reporting)
  • Proven ability to build scalable, maintainable automation projects and custom UIs in a production environment
  • Background in BMS/EPMS, SCADA, or ICS systems, ideally in data center or other mission-critical facilities
  • Familiarity with control protocols such as BACnet, Modbus, OPC-UA, MQTT, and integrating diverse building systems into a unified platform
  • Strong knowledge of HVAC, electrical systems, PLC/DDC logic, and industrial automation concepts
  • Demonstrated ability to translate operational needs into intuitive BMS solutions for non-technical users
  • Excellent communication skills for collaborating with engineers, contractors, and leadership stakeholders
  • Track record of solving complex automation challenges with innovative and data-driven solutions
  • Passion for leveraging data visualization and automation to improve system performance and user experience
Job Responsibility
Job Responsibility
  • Lead the design and development of BMS-based automation and visualization solutions for data center BMS/EPMS systems, ensuring seamless integration with HVAC, electrical, and monitoring infrastructure
  • Develop intuitive dashboards, HMIs, and operator workflows that make complex building and power systems easy to monitor and control
  • Build and maintain automation scripts, tags, templates, and reporting modules in BMS platforms to streamline commissioning, testing, and operations
  • Collaborate with engineers, contractors, and OEM partners to scope, configure, and deploy BMS projects that tie into BACnet, Modbus, OPC-UA, and MQTT protocols
  • Conduct system testing and simulation to validate functionality, data accuracy, and operational performance prior to live deployment
  • Leverage the BMS to collect and visualize real-time and historical data, enabling performance insights, fault detection, and predictive maintenance
  • Optimize existing BMS user interfaces to improve operator experience, reduce alarm fatigue, and accelerate troubleshooting
  • Provide leadership with actionable dashboards and automated reports on system health, uptime, energy efficiency, and capacity utilization
  • Mentor and train technicians and engineers on BMS development best practices, programming, and UI customization
  • Ensure all BMS and BMS/EPMS implementations comply with industry standards, cybersecurity best practices, and company sustainability goals
What we offer
What we offer
  • Industry competitive pay
  • Restricted Stock Units in a fast growing, well-funded technology company
  • Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents
  • Employer contributions to HSA accounts
  • Paid Parental Leave
  • Paid life insurance, short-term and long-term disability
  • Teladoc
  • 401(k) with a 100% match up to 4% of salary
  • Generous paid time off and holiday schedule
  • Cell phone reimbursement
  • Fulltime
Read More
Arrow Right

Manager, Instrument and Controls

Crusoe's mission is to accelerate the abundance of energy and intelligence. We’r...
Location
Location
United States , Cheyenne
Salary
Salary:
Not provided
crusoe.ai Logo
Crusoe
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering, Controls Engineering, Computer Science, or related discipline (Master’s or relevant certifications a plus)
  • Hands-on professional experience with Inductive Automation Ignition (Designer, Perspective, Vision, scripting, SQL integration, reporting)
  • Proven ability to build scalable, maintainable automation projects and custom UIs in a production environment
  • Background in BMS/EPMS, SCADA, or ICS systems, ideally in data center or other mission-critical facilities
  • Familiarity with control protocols such as BACnet, Modbus, OPC-UA, MQTT, and integrating diverse building systems into a unified platform
  • Strong knowledge of HVAC, electrical systems, PLC/DDC logic, and industrial automation concepts
  • Demonstrated ability to translate operational needs into intuitive UI/UX solutions for non-technical users
  • Excellent communication skills for collaborating with engineers, contractors, and leadership stakeholders
  • Track record of solving complex automation challenges with innovative and data-driven solutions
  • Passion for leveraging data visualization and automation to improve system performance and user experience
Job Responsibility
Job Responsibility
  • Lead the design and development of Ignition-based automation and visualization solutions for data center BMS/EPMS systems, ensuring seamless integration with HVAC, electrical, and monitoring infrastructure
  • Develop intuitive UI dashboards, HMIs, and operator workflows that make complex building and power systems easy to monitor and control
  • Build and maintain automation scripts, tags, templates, and reporting modules in Ignition to streamline commissioning, testing, and operations
  • Collaborate with engineers, contractors, and OEM partners to scope, configure, and deploy Ignition projects that tie into BACnet, Modbus, OPC-UA, and MQTT protocols
  • Conduct system testing and simulation to validate UI functionality, data accuracy, and operational performance prior to live deployment
  • Leverage Ignition to collect and visualize real-time and historical data, enabling performance insights, fault detection, and predictive maintenance
  • Optimize existing BMS/EPMS user interfaces to improve operator experience, reduce alarm fatigue, and accelerate troubleshooting
  • Provide leadership with actionable dashboards and automated reports on system health, uptime, energy efficiency, and capacity utilization
  • Mentor and train technicians and engineers on Ignition development best practices, scripting (Python/Jython), and UI customization
  • Ensure all Ignition and BMS/EPMS implementations comply with industry standards, cybersecurity best practices, and Crusoe’s sustainability goals
What we offer
What we offer
  • Industry competitive pay
  • Restricted Stock Units
  • Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents
  • Employer contributions to HSA accounts
  • Paid Parental Leave
  • Paid life insurance, short-term and long-term disability
  • Teladoc
  • 401(k) with a 100% match up to 4% of salary
  • Generous paid time off and holiday schedule
  • Cell phone reimbursement
  • Fulltime
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy