Tooling and GSE Engineer Job at Hermeus (Atlanta)

Tooling and GSE Engineer

Location

United States , Atlanta

Salary:

Not provided

Hermeus

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related field
3 or more years of experience in tooling design and manufacturing engineering within the aerospace, automotive, or related industries
familiarity with manufacturing and assembly processes for high-performance aerospace systems

Fulltime

Working student within Ground Support Equipment: Additive Manufacturing and Digitalisation

In order to enhance the maintenance of our Aircrafts, Airbus Operations is looki...

Location

Germany , Hamburg

Salary:

18.53 EUR / Hour

Airbus

Expiration Date

Until further notice

Requirements

Enrolled full time student (d/f/m) within Mechanical Engineering, Computer Science or similar field of study
CATIA knowledge would be plus
First experience with project management helpful
English: fluent
B1 in German is a plus

Job Responsibility

Support the integration of Additive Manufacturing into GSE & Tools
Transform conventional manufactured tools to Additive Manufacturing
Support a strategic project to roll out Digitalisation and connectivity of our GSE& Tools
Identify for what GSE & Tools, connectivity would benefit the most.
Support the development of GSE & Tools including design, test and business assessment
Optional: develop the use of AI into GSE & Tools business

What we offer

Attractive salary and work-life balance with an 18-hour week (flexitime)
A final thesis is possible after consultation with the department
Mobile working after agreement with the department
Traveling overseas or within Germany (team events) is possible after consultation and agreement from the department
International environment with the opportunity to network globally
Work with modern/diversified technologies
At Airbus, we see you as a valuable team member and you are not hired to brew coffee, instead you are in close contact with the interfaces and are part of our weekly team meetings
Opportunity to participate in the Generation Airbus Community to expand your own network
You will receive a collectively agreed salary of at least €18.53 per hour, depending on the job. There are also special payments such as vacation pay.

Parttime

Head of Repair, lease & exchange order management - asia pacific

This job is based in Satair. Responsible for all Parts & Tools Repair services (...

Location

Singapore

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Bachelors in Business Administration or similar/equivalent
Prior experience in people management
Knowledge about the product management discipline
Strong knowledge about the repair activities/services and market requirements (customers & suppliers)
Knowledge of relevant air worthiness and regulatory agencies requirements
Knowledge of Export Control Basics
Knowledge of civil aviation requirements / rules and Airbus documentation
Minimum 10 years working experience with airline and/or MRO operations
Customer Service and Supply Chain experience

Job Responsibility

Geographical scope: Asia Pacific & China
Oversee a team that acts in direct exchange with external customers (airlines, MRO), internal stakeholders (Customer Support Directors, Field Service Managers, Account Directors, Credit Management, etc.), internal and external repair stations and manages, the delivery of products and services for 7 different & individual business lines
Manage the order book proactively and implement ideas and initiatives to improve the operational key figures repair turnaround time (TAT) performance and reliability as part of continuous improvement
Design and promote a sustainable development of the team within the framework of global change processes such as projects or market conditions
The job holder forms the interface to those directly involved in the process at the escalation level, such as customers, suppliers, service management, tools engineering, repair network management and is responsible for solving or prioritizing process-related problems
The job holder is responsible for ensuring the relevant process steps along the various business lines. This includes the prioritization of tasks and the allocation of work priorities to individual team members on a daily basis.
The job holder makes an active contribution to CSIP (Customer Service Improvement Program) within the framework of business reviews with customers
Respond to all RFP / RFQ in line with agreed processes & formats
Undertake customer & repair station visits as required
Undertake key customer business reviews identifying service quality / satisfaction & new business opportunities

Fulltime

Structures Technician

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Windsor Locks

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Received training from a sheet metal aircraft technical school or equivalent schooling
Typically have at least 3 years of aircraft structural sheet metal repair / modification experience
Ability to interpret and work with mechanical engineering drawings
Ability to effectively communicate in both written and verbal form on individual and / or aircraft status
Own a basic set of hand tools with the ability to demonstrate Inventory and control of tools
Ability to obtain appropriate Ground Support Equipment (GSE) qualifications as required
Able to work unscheduled overtime including nonscheduled work days and holidays
Able to work in seasonal/inclement weather outside
Ability to obtain a Security Identification Display Area badge (SIDA) if applicable
Have basic PC skills

Job Responsibility

Troubleshoot, repair, inspect and perform maintenance on customer aircraft
Fabricate and or modify structural modifications on aircraft parts
Perform minor structural repairs on composite components either attached or detached
Assist in conducting hidden damage inspection of aircraft structures
Assist with complex structural repairs either on or off aircraft
Assist with aircraft component repair
Remove / install aircraft components as required
Comply with environmental health and safety policies/procedures
Participate in 5-S activities
Perform work in a safe and timely manner

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Structures Integration Technician

As a Structures Integration Technician, you will play a critical role in the han...

Location

United States , Los Angeles

Salary:

30.00 - 50.00 USD / Hour

Hermeus

Expiration Date

Until further notice

Requirements

3+ years of experience in aerospace, startup, or fast-paced prototyping/manufacturing environments
Demonstrated experience in both flight hardware assembly and production support, including system-level troubleshooting
Ability to work across a wide range of technical areas including fluids, inventory support, structural assembly, and manufacturing
Strong proficiency with engineering drawings, schematics, GD&T, and hands-on fabrication
Familiarity with shop tools, rigging, GSE, and component-level ATP/proof testing
Highly self-directed with a track record of working independently and taking initiative without constant oversight
Strong understanding and practice of 5S, lean manufacturing, and continuous improvement principles

Job Responsibility

Take full ownership of work orders, quality buyoffs, and material handling, including occasional support in inventory and materials control when needed
Execute a wide variety of mechanical and electromechanical sub-assemblies, as well as full system-level integration tasks with minimal instruction
Perform critical structural operations: drilling, reaming, countersinking, deburring, and installing precision fasteners per spec
Install, troubleshoot, and maintain fluid, pneumatic, and electromechanical systems, including leak checks, ATP, and light electrical harnessing
Provide cross-functional support across departments—whether that’s jumping in on a build, troubleshooting a test setup, or organizing work centers
Build and refine custom tooling and fixtures for one-off builds or repeatable operations, contributing to build readiness and safety
Deliver in-the-moment engineering feedback, and proactively redline work instructions or flag inefficiencies to continuously improve processes
Drive process improvement initiatives—applying your generalist lens to find cycle time reductions, streamline flows, and simplify complex tasks
Operate independently in a dynamic environment where priorities change rapidly
bring a flexible, "do what’s needed" mindset every day

What we offer

Unlimited PTO policy
Paid parental leave
Potential for year-end bonuses
100% employer-paid health care
401k & Retirement Plans
Weekly Paid Office Lunches
Fully stocked breakrooms
Stock Options

Fulltime

Amo hangar management

Within the Fleet efficiency Customer Care Centre organization, The AMO hangar ma...

Location

China , Beijing

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Aviation related Degree
Part 145 environment working experience or relevant managing aviation maintenance facilities
Fluent English both in written and oral speaking
Knowledge of hangar facilities, ground equipment, toolings and consumables of Part 145 requirements
Ability to coordinate with many different stakeholders

Job Responsibility

Accountable for hangar operations and compliance, hangar maintenance and overall readiness
Hangar resources management
Hangar slots management
Focal point between Airbus AMO and supplier/suppliers
Support Logistics and warehouse management
Management of area, GSE, tool, parts, and consumables between successive working parties
Hangar costs follow up
Ensure Airbus AMO Staff reviewed the latest revision of local procedure and provide acknowledgement before starting work in supplier’s facility
Ensure the Certifying Staff, Support Staff, TSM, AEE, and SR of Airbus AMO reviewed the latest revision of Joint Procedures Manual before starting work in supplier’s facility

Fulltime

Field Service Engineer

A world leader in the design, manufacture, and servicing of Aircraft Tooling, En...

Location

Greece , Spata, Athens

Salary:

Not provided

Randstad

Expiration Date

March 30, 2026

Requirements

Proven experience in the repair and maintenance of mechanical, hydraulic, or pneumatic systems of up to 4 years
A technical diploma or degree in mechanics (automotive, motorcycle, heavy machinery, or industrial mechanics)
Proficiency in reading and interpreting complex technical drawings and documentation
Strong manual dexterity, precision, and a hands-on approach to technical problem-solving
Familiarity with welding, machining, or other specialized industrial processes
A background in customer service, relationship management, or business operations
Fluency in English, with strong reading and writing skills for technical and professional communication

Job Responsibility

Perform diagnostics, repairs, and preventive maintenance on mechanical and hydraulic aeronautical tooling and GSE
Execute functional and load tests to ensure all equipment meets strict technical and safety standards
Develop autonomous diagnostic methods and repair solutions for complex or non-standard technical issues
Manage the dismantling, reassembly, and precision calibration of equipment, including final quality control
Conduct on-site technical interventions and service at customer facilities (Airlines, MROs, OEMs)
Coordinate technicians and procurement to plan, organize, and execute service projects efficiently
Act as the primary technical point of contact, managing relationships and ensuring clear communication
Generate detailed technical quotations, analyze project resources/budgets, and negotiate terms with clients
Support growth by identifying new opportunities, participating in tenders, and conducting customer prospecting visits
Maintain ERP records, workshop documentation, and ensure strict compliance with safety and storage protocols

Fulltime

Procurement Officer

We’re looking for an Aircraft Procurement Officer to join our newly created team...

Location

United Kingdom , Amesbury

Salary:

Not provided

360 Resourcing Solutions

Expiration Date

Until further notice

Requirements

Must be computer literate and have a working knowledge of Microsoft Office
Ideally, you should have experience in purchasing of Aircraft parts and consumables in compliance with UK CAA Part 145 regulations, Ground Support Equipment (GSE) and tooling, and Infrastructure or facility requirements
You should have familiarity with Approved Supplier Lists and supplier audit/compliance processes
An understanding of MRP / ERP systems (e.g., Quantum, Rusada ENVISION, AMOS, OASES, or SAP) would be beneficial
Knowledge of Incoterms, lead-time planning, and logistics in an aviation context
Experience with repair management, rotatable parts, and exchange transactions is advantageous
CIPS (Chartered Institute of Procurement & Supply) qualification (Level 3–5) is preferred but not essential if previous working experience is sufficient
You will also need to be eligible to hold a UK Security Clearance

Job Responsibility

Vendor Management
Contract Negotiation and Management
Procurement Process Management
Regulatory Compliance
Inventory Management
Safety Assurance
Rotable components
Coordinate with planning, engineering, and maintenance teams
Proactively manage risks related to supply chain disruptions, regulatory non-compliance, and quality control issues
Ensure timely procurement of all required aviation components, maintenance materials, and support services

What we offer

generous salary
25 days holiday per year from day one plus bank holidays
5% matched Pension scheme
Group Life Insurance
Health and Wellbeing benefits including Health Care Cash Plan and an EAP

Fulltime

Tooling and GSE Engineer

Hermeus

Location:
United States , Atlanta

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
February 18, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Tooling and GSE Engineer

Tooling and GSE Engineer

Working student within Ground Support Equipment: Additive Manufacturing and Digitalisation

Head of Repair, lease & exchange order management - asia pacific

Structures Technician

Structures Integration Technician

Amo hangar management

Field Service Engineer

Procurement Officer

Tooling and GSE Engineer

Hermeus

Location:United States , Atlanta

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:February 18, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Tooling and GSE Engineer

Tooling and GSE Engineer

Working student within Ground Support Equipment: Additive Manufacturing and Digitalisation

Head of Repair, lease & exchange order management - asia pacific

Structures Technician

Structures Integration Technician

Amo hangar management

Field Service Engineer

Procurement Officer

Location:
United States , Atlanta

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
February 18, 2026