Tool & Fixture Designer Job at CNH Industrial (Saskatoon)

Tool & Fixture Designer

Design, layout, construct, alter and repair a normal variety of tools, dies, fix...

Location

Canada , Saskatoon

Salary:

Not provided

CNH Industrial

Expiration Date

Until further notice

Requirements

Grade 12 diploma or equivalent
Mechanical Engineering Technology diploma or Mechanical Engineer degree
Five years’ experience in Tool and Die Making may be viewed as an equivalent
Proficient in math with an understanding of geometric tolerance (GD&T)
Able to perform light physical effort consisting of occasionally lifting or moving average weight material

Job Responsibility

Follow prescribed safety standards, rules and regulations including those regarding the usage of PPE, Emergency Plans and EH&S Policy
To identify unsafe acts and unsafe conditions by completing observation cards
To maintain 5s by removing all tools, equipment, and parts not needed in the work area and for those that are needed to ensure they have a dedicated, labeled home and are in that dedicated home
To monitor for and alert their Team Leader or Supervisor of any abnormalities from the standards in their area
Completes all CILR activities as required, identifies deficiencies and sources of contamination, including difficult access areas in the workstation, and provides suitable countermeasures to address these issues
Recognize and report for correction drawing or blueprint errors that may prevent proper function of tool
Perform design reviews and follow-up fixturing concerns through to production
Set up and make tool tryouts, diagnose, and remedy operations, material, or dimensional problems
Make correct decisions as to fits, finishes, machining, and assembly sequences in order to produce workable units and maintain close tolerances
Plan inspection procedures and layout work in proper inspection sequence, make all necessary mathematical calculations

What we offer

Flexible work arrangements
Savings & Retirement benefits
Tuition reimbursement
Parental leave
Employee Assistance Programs

Fulltime

Manufacturing Engineer - Tooling

The Manufacturing Engineer plays a key role in creating the internal manufacturi...

Location

United States , Chatsworth

Salary:

120000.00 USD / Year

Machina Labs

Expiration Date

Until further notice

Requirements

B.S. in Mechanical/Manufacturing/Industrial Engineering (or equivalent experience)
3+ years designing fixtures/jigs for machining and/or welding in aerospace/defense or similar high-spec manufacturing
Expert SolidWorks: parts/assemblies, drawings, weldments, sheet metal, configurations, design tables, PDM
Strong GD&T (ASME Y14.5) and tolerance stack-up skills
designs that are CMM-friendly and inspection-ready
Practical knowledge of AWS D17.1 considerations (joint prep, purge, distortion control) and thin-wall metallic assemblies
Hands-on shop familiarity: machining processes, fastening, alignment, metrology (calipers, height gages, indicators), safe ergonomics
Comfortable releasing through MRP/ERP, generating BOMs, and writing clear work instructions
Must be a U.S. person as defined in ITAR and EAR

Job Responsibility

Design production-ready tooling: quick-change nests, soft jaws, vacuum plates, clamps, and AWS D17.1-informed weld fixtures (purge dams/manifolds, chill blocks, heat sinks, ceramic backing)
Establish datum strategies and poka-yoke features for foolproof loading, minimal distortion, and consistent weld penetration
Create robotic forming and welding fixtures (turntables/positioners, EOAT, torch mounts) with clear routing for cables, gas, and sensors
Produce fully-detailed SolidWorks models/drawings (weldments, sheet metal, configurations, exploded views, BOMs) to ASME Y14.5 with clean GD&T and tolerance stacks
Release tool designs through PDM/MRP, generate BOMs, routings, and standard work/work instructions for the floor
Run basic FEA/deflection checks (SolidWorks Simulation or equivalent) to validate stiffness and locate supports/clamps
Support build/prove-out: fit checks, on-floor tweaks, parameter windows, and design revisions via ECR/ECO
Source and manage outside fabricators/machine shops
verify capability, cost, and schedule
Maintain a tooling standards library (locating hardware, De-Sta-Co/pneumatic/hydraulic clamping, sensors, safety interlocks)

What we offer

comprehensive benefits (Medical, Dental, Vision)
PTO
Stock Options

Fulltime

Toolmaker III

Sigma Design has collaborated with a heavy industrial fabrication and machine sh...

Location

United States , Beaverton

Salary:

83200.00 - 93600.00 USD / Year

Sigma Design

Expiration Date

Until further notice

Requirements

High school education or equivalent
two years of trade school training
ten or more years of related experience
ten or more years of specific tool and die making experience
expert level knowledge of Tool and Die Making practices, designs and construction
technical expertise in one or more specialized areas (gauge making, millwright, or other mechanical, pneumatic, hydraulic, or electrical specialties)
thorough understanding of shop mathematics, Geometric Dimensioning & Tolerancing, and metal properties
demonstrated ability to understand highly technical electronic and written blueprints, models and specifications
proficiency with a wide range of hand and power tools
superior level of accuracy with demonstrated ability to operate standard shop machine tools to tolerances of .0002”

Job Responsibility

Sets-up and operates a full range of both manual and CNC machine tools (lathe, milling machine and grinder) to design and build tooling
determines machining requirements and processes
verifies conformance of machined parts to specifications
works from blueprints, sketches, models and verbal description to build, rebuild, modify, and repair tools, dies, gages and equipment
determines required work tools and measurement devices
reviews and verifies prints and drawings
determines availability of materials and equipment
priorities and schedules work flow
computes dimensions and plan layout and assembly operation
measures, marks and scribes metal stock for machining

What we offer

Medical
Dental
Vision
Employer Paid Life insurance
Telehealth services
Long and Short-Term Disability
HSA or FSA Account
2 weeks of vacation
5 Oregon sick days
4 personal days

CNC Engineering Technician

Hyliion is seeking a highly skilled CNC Engineer Technician (Prototyping & Tooli...

Location

United States , Austin

Salary:

Not provided

Hyliion

Expiration Date

Until further notice

Requirements

Associate or bachelor’s degree in Mechanical, Manufacturing, Industrial Engineering, Machine Technology, Advanced Manufacturing, or a related technical field required
5+ years of CNC machining experience (mills, lathes, or 5-axis preferred) after completing your degree
Strong background in prototype machining and quick-turn environments
Experience designing and machining custom tools, fixtures, and workholding
Proficiency with CAD/CAM software for toolpath creation
Ability to read engineering drawings, GD&T, and engineering documentation
Strong understanding of machining materials (aluminum, steels, plastics, etc.)

Job Responsibility

Program, set up, and operate CNC mills, lathes, wire EDM to produce precision prototype components
Interpret engineering drawings, 3D models, and design intent to create one-off or low-volume parts
Select appropriate tools, speeds, feeds, and machining strategies to optimize quality and efficiency
Perform quick-turn machining on evolving designs requiring adaptability and engineering collaboration
Design and manufacture custom tooling, fixtures, jigs, and work holding solutions to support both prototype and limited production needs
Collaborate with manufacturing and design engineers to develop and refine tooling concepts
Implement improvements to tooling ergonomics, repeatability, accuracy, and safety
Create and edit CNC programs using CAD/CAM software (Fusion 360, Mastercam, NX, or similar)
Import and manipulate 3D CAD files to generate toolpaths
Verify toolpaths using simulation to prevent collisions and ensure manufacturability

What we offer

Medical Plans, with PPO or HDHP options
Dental Plans, with buy-up option
Vision Plan
Life Insurance and Accidental Death & Dismemberment Plans, with buy-up options
Short Term Disability, paid for by the company
Long Term Disability, paid for by the company
Flexible Spending Accounts (FSA)
Health Savings Account (HSA)
401k/Roth 401k
Voluntary Accident Plans

Fulltime

Senior Microelectronics Process Engineer

We are seeking an industry expert to lead the process architecture and developme...

Location

Canada , Kanata, ON

Salary:

Not provided

Sanmina

Expiration Date

Until further notice

Requirements

Master’s Degree in Engineering (Materials, Electrical, Mechanical, or Physics)
Minimum 8+ years of direct, hands-on experience in microelectronics packaging and process engineering
Deep expertise in Flip Chip and Wire Bonding (Chip & Wire) processes
Strong understanding of material interactions, including underfills, epoxies, and gold-tin (AuSn) soldering/reflow processes
Proficiency in programming automated assembly equipment (pick-and-place, dispensers, wire bonders)
Demonstrated experience driving Engineering Change Orders (ECOs) and process qualifications
Strong background in statistical process control (SPC) and data analysis

Job Responsibility

Define the Strategy: Conceptualize and develop comprehensive assembly strategies for complex optoelectronic modules
Advanced Packaging Execution: Lead the hands-on development of critical process recipes, including Flip Chip, Underfill, Die Attach (epoxy & eutectic AuSn), and Wire Bonding (ball/wedge)
Equipment Leadership: Research, specify, and procure capital equipment. Oversee acceptance testing (SAT/FAT)
Design Partnership: Act as the primary feedback loop to the internal design team and external customers. Provide expert DFx (Design for Assembly/Manufacturing) guidance
Tooling & Fixturing: Conceptualize and drive the design of custom tooling and fixtures required for novel assembly techniques
Customer Interface: Serve as the primary technical liaison for customers during the development phase
Rigorous Methodology: Implement robust process controls using PFMEA and Control Plans
Root Cause Analysis: Lead complex troubleshooting efforts using methodical approaches (8D, etc.)
Documentation: Author and approve high-level process assembly documentation and process qualification reports
Technical Mentorship: Act as a subject matter expert and mentor to junior and intermediate engineers

What we offer

Impact: Work on cutting-edge technologies that are shaping the future of connectivity
Growth: A visible role with the opportunity to shape the engineering culture and technical roadmap of the organization
Accommodations are available on request for candidates taking part in all aspects of the selection process

Fulltime

Sales engineer

Asst Mgr [Sales Engineering] – Fixture Business, WIDMA MSG. Job summary: Study t...

Location

India , Bangalore

Salary:

Not provided

Kennametal

Expiration Date

Until further notice

Requirements

BE (Mechanical / Prod. Engg) with 10-12 yrs experience or DME (Mechanical / Machine Tool Technology / GTTC / NTTF) with 12 - 15 yrs Experience (Engg. Degree should be direct degree from Regular Engg. College)
Overall experience in Proposal Engineering / Application Engineering from Machine Tool field
At least 8 years experience in Pre Sales activity in machine tool company preparing the Techno-Commercial offers for Turnkey solutions
Experience in part programming, having worked on VMC / HMC for 2 yrs will be preferred
Strong ability to understand customer's issues and to tackle problems independently ensuring customer satisfaction
Years of Relevant Work Experience Required: 12-15 yrs

Job Responsibility

Study the component drawings, go through the VMC / HMC specifications, understand the customer productivity requirements
Prepare the costing & Techno commercial offer including the Time study, Fixture concept, Tool selection, pricing for Fixture / cutting tools / machine accessories, accuracy analysis and commitment
Ensure timely submission of Techno-Commercial offers
Travel Pan India for Business Development of Fixture Business
Engage in Techno - Commercial discussion with customer and order finalisation
Do the project kickoff meeting and handover the project to design and CFT
Ensure customer satisfaction
Prepare the Time study, Fixture & Tooling Concepts
Prepare the costing of Fixture, Tools & accessories
Submit the Quotation & Technical details

Toolmaker III

Sigma Design has collaborated with a heavy industrial fabrication and machine sh...

Location

United States , Beaverton

Salary:

83200.00 - 93600.00 USD / Year

Sigma Design

Expiration Date

Until further notice

Requirements

High school education or equivalent
two years of trade school training
ten or more years of related experience
ten or more years of specific tool and die making experience
expert level knowledge of Tool and Die Making practices, designs and construction
technical expertise in one or more specialized areas
thorough understanding of shop mathematics, Geometric Dimensioning & Tolerancing, and metal properties
demonstrated ability to understand highly technical electronic and written blueprints, models and specifications
proficiency with a wide range of hand and power tools
superior level of accuracy with demonstrated ability to operate standard shop machine tools to tolerances of .0002”

Job Responsibility

Sets-up and operates a full range of both manual and CNC machine tools
works from blueprints, sketches, models and verbal description to build, rebuild, modify, and repair tools, dies, gages and necessary equipment
reviews and verifies prints and drawings, determines availability of materials and equipment and priorities and schedules work flow
computes dimensions and plan layout and assembly operation
measures, marks and scribes metal stock for machining
plumbs pneumatic components for fixturing
fabricates, maintains, modifies and repairs metalworking dies, cutting tools, jigs, fixtures and gages
builds, tests, calibrates, adjusts and maintains production gauging
schedules outside vendor calibrations, creates or updates calibration procedures, orders new gauging
maintains gauging database and prepares instruments prior to issue

What we offer

Medical
Dental
Vision
Employer Paid Life insurance
Telehealth services
Long and Short-Term Disability
HSA or FSA Account
2 weeks of vacation
5 Oregon sick days
4 personal days

Fulltime

Supplier Quality & Development Engineer – Castings & Machining

The Supplier Quality & Development Engineer (SQDE) is responsible for ensuring t...

Location

India , Coimbatore

Salary:

Not provided

Husco

Expiration Date

Until further notice

Requirements

BE/Diploma in Mechanical or Production Engineering
10–12 years of experience in supplier quality and development, with strong exposure to – Green sand moulding, Gravity Die casting, Pressure Die Casting, Low Pressure Die Casting and machining processes
Hands-on experience with APQP, PPAP, FMEA, SPC, MSA, ISO 9001, and IATF 16949
Proficiency in GD&T, CMM inspection, and machining tolerances
Strong analytical, problem-solving, and cross-functional collaboration skills
Willingness to travel to supplier locations for audits and development activities

Job Responsibility

Manage day-to-day supplier quality issues and ensure robust containment on production lines
Issue NCRs and lead root cause analysis (RCA) and 8D problem-solving with suppliers
Develop and implement containment methods, SOPs, and quality plans for supplier PDAs and inspections
Lead MRB processes and manage disposition of non-conforming parts
Monitor and report supplier performance (PPM, NCRs, FTT)
Support QMS compliance during customer and IATF audits
Deliver supplier training on quality awareness, Q-alerts, and risk assessments
Evaluate and develop supplier capabilities in casting and precision machining
Lead continuous improvement projects throughout the casting and machining supply chain
Utilize data analytics to assess supplier performance and quality

Tool & Fixture Designer

CNH Industrial

Location:
Canada , Saskatoon

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 07, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Tool & Fixture Designer

Tool & Fixture Designer

Manufacturing Engineer - Tooling

Toolmaker III

CNC Engineering Technician

Senior Microelectronics Process Engineer

Sales engineer

Toolmaker III

Supplier Quality & Development Engineer – Castings & Machining

Tool & Fixture Designer

CNH Industrial

Location:Canada , Saskatoon

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 07, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Tool & Fixture Designer

Tool & Fixture Designer

Manufacturing Engineer - Tooling

Toolmaker III

CNC Engineering Technician

Senior Microelectronics Process Engineer

Sales engineer

Toolmaker III

Supplier Quality & Development Engineer – Castings & Machining

Location:
Canada , Saskatoon

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
January 07, 2026