Technician 3, Manufacturing Equipment Job at Sandisk (Batu Kawan, Penang)

Technician 3, Manufacturing Equipment Maintenance

The Technician 3, Equipment Maintenance position is a critical role within our o...

Location

Malaysia , Batu Kawan, Penang

Salary:

Not provided

Sandisk

Expiration Date

Until further notice

Requirements

Certificate / Diploma in Mechanical/ Electronics/ Mechatronics
Proficient at troubleshooting electrical, mechanical, pneumatic, and PC software/hardware related issues
Ability to use schematics, hand tools, electrical gauges and common test equipment for calibration, diagnosis and repair of equipment
Ability to understand PLC system
High level attention to detail with methodical approach to troubleshooting and project management
Excellent verbal/written communication skills with the ability to effectively communicate with peers, engineering, and managers
Self-motivator
ability to work independently under general guidance and direction
Knowledge in Basic Troubleshooting Flow (Electrical & Mechanical)
Knowledge in Electric / Electronic Component

Job Responsibility

Conduct comprehensive electrical and mechanical troubleshooting to identify and resolve issues in non-functioning equipment crucial to backend processes
Provide expert manufacturing and equipment support in a dynamic, high-volume manufacturing environment characterized by rapid technological advancements
Meticulously dismantle, adjust, repair, and reassemble equipment in strict accordance with schematics, repair manuals, and precise specifications
Execute rigorous preventive maintenance protocols, perform complex repairs, and conduct in-depth troubleshooting diagnoses on production equipment to ensure maximum operational efficiency
Demonstrate advanced problem-solving skills to address non-standard issues, operate with minimal supervision, and adapt swiftly to shifting priorities in a fast-paced industrial setting
Exhibit a high degree of self-motivation and initiative, effectively managing individual responsibilities while actively contributing to team objectives
Collaborate closely with the Engineering department to facilitate new equipment installations and drive continuous improvement initiatives

Fulltime

Technician 3, Manufacturing Equipment Maintenance

Sandisk understands how people and businesses consume data and we relentlessly i...

Location

Malaysia , Batu Kawan, Penang

Salary:

Not provided

Sandisk

Expiration Date

Until further notice

Requirements

Candidate must possess at least a Diploma in Mechanical, Electronics, or Mechatronics Engineering
Experience in troubleshooting automation equipment, such as autonomous robotic vehicles, is an advantage
Experience in PLC is also an advantage

Job Responsibility

Responsible for improving and sustaining the automation equipment capability and meet the KPI (Availability, OEE and Yield)
Performing and line troubleshooting and supporting daily production operation
Analyze equipment failure root causes and propose corrective actions
Ability to identify root cause and provide corrective action through use of Effective problem solving tools
Perform regular inspections to identify equipment root cause
Perform Preventive Maintenance and calibration the equipment to optimal condition
Maintain equipment maintenance documentation and checklist
Propose improvements to enhance equipment performance and reliability
Support equipment setup, relocation and retirement
Assist Engineer in continuous Equipment improvement projects and Automation projects

Fulltime

Manufacturing Equipment Technician

We are looking for a Manufacturing Equipment Technician to support the Manufactu...

Location

United States , San Jose

Salary:

40.00 - 65.00 USD / Hour

Figure

Expiration Date

Until further notice

Requirements

Experience with high tech manufacturing tools and automation
Occasional travel to equipment vendor locations
Familiarity with basic tools and facilities equipment such as drills, soldering irons, wire crimping, and compressed air fittings
Ability to take full ownership of projects with minimal direction from managers
Respectful work attitude with a championship mindset
Excellent time management skills and a commitment to punctuality
Previous experience working in a manufacturing environment with complex equipment
Strong attention to detail with a methodical approach to documentation and organization
Ability to lift and transport materials safely (up to 50lbs as required)
Excellent communication skills and ability to work effectively in a team setting

Job Responsibility

Provide technician-level support for all manufacturing equipment, including but not limited to adhesive dispense systems, 3-axis robot gantries, laser cleaners, laser welders, wirebonders, vision systems, torque tools, custom fixtures, and tooling
Serve as the first point of contact to troubleshoot issues that arise during production
Develop and own a full maintenance program, including setting preventative maintenance schedules, ensuring a proper supply of spare parts, and writing standard operating procedures for maintenance
Write standard operating procedures/work instructions for operation of equipment
Operate equipment during initial process validation builds
Train operators and associates on operation of equipment in steady state production
Support engineering teams with line setup and process validation (e.g., gauge R&R testing, process window qualification, NPI validation builds)
Support engineering teams on failure root cause investigations
Support cycle time studies
Take ownership of implementing equipment/process improvements to improve safety, quality, and throughput

Fulltime

Electronic Equipment Technician II

The Electronics Equipment Technician II provides technical support to the FAA eF...

Location

United States , Oklahoma City

Salary:

Not provided

Chickasaw Nation Industries, Inc (CNI)

Expiration Date

Until further notice

Requirements

High school diploma or General Education degree (GED) and a minimum of three (3) years relevant experience
or an Associate degree and a minimum of two (2) years or relevant experience
Ability to obtain and maintain a public trust security clearance
Possess a high degree of electronic knowledge
Communications system training and experience working on UHF, VHF, and HF radio and communications systems
Radio Communication Links, Low Density Communication Links, Data Interchange Networks, Voice Switches, Terminal Data Links, Satellite communication systems, and Microwave Communication systems
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals
Ability to accurately log incident tickets
Ability to write routine reports and correspondence
Ability to speak effectively before groups of customers or employees of organization

Job Responsibility

Provides technical support to the FAA eFast NAS TSS AMA-900 contract
Support includes, on a daily basis, training or functional environment including, but not limited to, preventative maintenance, corrective maintenance, system installation, removal and configuration, troubleshooting, reporting inventory and quality management system support
Applies comprehensive knowledge to solve complex problems by interpreting manufacturers’ manuals or similar documents and support complex integrated systems in accordance with the published FAA or manufacturer guidance or documentation
Perform tasks to include a wide array of complex and varying assignments and understand new technologies and methods that require the application of technical knowledge
Applies judgement to the planning work sequence and in selecting tools and testing instruments, as well as provide familiarity with the interrelationships of circuits
Performs testing utilizing Oscilloscopes, Digital volt/ohm meters, and other test equipment
Performs fact finding and analysis, as required, to address a single activity or a routine problem, and apply established procedures where the nature of the system, feasibility, computer equipment, operating system and programming language have been decided
Conducts research on routine user problems and solve them by modifying the existing system when the solutions follow clear precedents
Assists higher level technicians and provides guidance to lower-level technicians
Responsible for aiding in own self-development by being available and receptive to all training made available by the company

Fulltime

Interior Remove & Install Technician

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Windsor Locks

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

3-5 years of Interiors Remove & Install experience on corporate aircraft
Ability to break down cabinets remove hardware, inlay etc.
Ability to strip finish utilizing heat and scraper
Experience with sanding and prepping raw veneer and hardwood for finish, including touching up defects in veneer
Ability to mix match and apply stains and paints on new veneers
Knowledge on spraying polyester base coats and urethane top coats
Experience with Aircraft touch up
Ability to mask and unmask components for finish process
Mechanical aptitude
Ability to interpret and work with mechanical engineering drawings

Job Responsibility

Fabricate, install and refurbish aircraft interior equipment and furnishings per work order or customer request
Perform and document all work performed per appropriate manuals and regulations as required
Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hanger positions)
Comply with environmental health / safety policies / procedures
Participate in 5-S activities
Assist with additional work on drop-ins and planned maintenance within the facility during slow periods of unplanned work as needed
Clean aircraft as required
Travel on international assignments if required
Assist with maintenance at off-site locations as needed
Assist with other maintenance disciplines as needed

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Technician

Description of the Job- Essential Duties and Responsibilities: Ensures the activ...

Location

India , Guindy, Tamil Nadu

Salary:

Not provided

TPI Composites

Expiration Date

Until further notice

Requirements

Intermediate/ITI/DME education
Minimum of 3 Years work experience in Quality Department

Job Responsibility

Ensures the activities at the department are in line with the ISO9001, ISO 14001, ISO 45001 Management System
Inform the shift manager if unable to attend work
Follows, implements and ensures compliance with all the instructions, procedures and announcements published on health, safety, environment and security
Ensures that the objectives and targets within the scope of the IMS policy are achieved
Responsible for the implementation and improvement of the 5S cleanliness and tidiness system in his/her areas of responsibility
Responsible to go to the company infirmary immediately after suffering an occupational accident and to immediately submit all judicial reports received thereafter to the company infirmary
Responsible to notify his/her direct manager about near-miss incidents, all accidents (including accidents causing financial losses) and nonconformances in the factory
Ensure that the Tg/FWF/FVF/Ashing Test/Ultimate Tg tests/GKK tests/Viscosity tests received from the mold department or the finish department are performed and entered into the system
Check the measurements critical for quality at his/her shift and ensure accurate measuring
Inform the result of any nonconformance to the reported persons/departments

What we offer

health and dental insurance
401(k) plan with company match
paid vacation plans

Fulltime

Senior Engineer, Equipment Engineering

Sandisk understands how people and businesses consume data and we relentlessly i...

Location

Malaysia , Batu Kawan

Salary:

Not provided

Sandisk

Expiration Date

Until further notice

Requirements

Bachelor of Engineering (Hons) in Electrical / Electronics/ Mechanical / Mechatronic
3+ years of experience in test equipment engineering, specifically in SSD manufacturing or a related industry, with a strong emphasis on sustaining and maintenance
Proven track record of maintaining high slot-on availability and first pass yield in a high-volume production environment
Experience in utilizing data analytics for equipment monitoring, troubleshooting, and maintenance optimization
Expertise in maintaining and troubleshooting SSD test equipment, with a deep understanding of calibration, reliability, and maintenance protocols
Proficiency in data analysis tools (e.g., Python, R, SQL, MATLAB) for monitoring and optimizing equipment performance
Strong knowledge of predictive maintenance techniques, including AI-driven approaches to equipment reliability
Familiarity with SPC, DOE, and Six Sigma methodologies for continuous improvement
Strong leadership skills with the ability to mentor and guide junior engineers and technicians
Excellent problem-solving and decision-making abilities, with a focus on data-driven solutions

Job Responsibility

Ensure that test equipment is functioning optimally, achieving >99.3% slot-on availability and maintaining a high first pass yield
Perform routine maintenance, calibration, and troubleshooting of test systems to minimize downtime and ensure high reliability
Monitor real-time and historical data to detect issues, reduce failures, and maximize equipment uptime
Use data analytics to monitor test equipment performance, identify patterns, and anticipate potential issues before they impact production
Analyze test equipment data to improve test efficiency, reduce down times, and enhance tester performance
Implement real-time monitoring and diagnostic tools to ensure sustained optimal performance of test equipment
Analyze equipment performance data to optimize maintenance schedules and extend the life cycle of test equipment
Lead continuous improvement projects focused on sustaining and enhancing the efficiency and reliability of test equipment
Lead and mentor a team of engineers and technicians in sustaining tester, sharing best practices for maintenance and troubleshooting
Work closely with production, quality, and other cross-functional teams to ensure seamless operation and continuous improvement in testing

Fulltime

Process Engineering Technician

Nemera is a world leader in the design, development, and manufacturing of drug d...

Location

United States , Buffalo Grove

Salary:

Not provided

Nemera

Expiration Date

Until further notice

Requirements

Minimum of 3 years performing tasks as Operator Technician III or equivalent title (pull/set molds, load processes and start/stop presses)
Skills in troubleshooting loading equipment, dryers and other equipment
Forklift driving certification
Able to frequently lift up to 40 lbs.
Ability to push and pull items
Ability to stand and/or walk up constantly during the shift
Ability to climb up and down ladders

Job Responsibility

Support the development of new injection molds by participating in process validation activities
Perform the set-up and removal of injection molding systems
Perform the duties associated with cleaning the material blending, drying and loading systems
Perform line clearance activities per Nemera guidelines
Participate in the optimization activities for injection molding process and robust process window development based on sound process engineering principles
Perform all tasks associated with LRP folder activities
Properly execute BMS activities involving loading and closing sample orders
Ensure that sample runs are performed according to Sample Request (SR) requirements
Perform and document OQ and PQ activities as assigned
Identify system safety hazards and work with site EH&S representatives to remediate appropriately (ex. warning labels, guarding, training, etc.)

Fulltime

Technician 3, Manufacturing Equipment

Sandisk

Location:
Malaysia , Batu Kawan, Penang

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 04, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Technician 3, Manufacturing Equipment

Technician 3, Manufacturing Equipment Maintenance