Technical Safety Engineer Job at Lobellia (Doha)

Junior Technical Safety / Loss Prevention Engineer

At DORIS you will be joining a fast-moving and technically diverse environment. ...

Location

France , Paris

Salary:

Not provided

Doris Group

Expiration Date

Until further notice

Requirements

Masters or Bachelors degree in engineering with specialization in industrial risk control, loss prevention or industrial safety (fresh graduates accepted)
Knowledge of PHAST software is a plus
Initial experience in Oil & Gas engineering is a plus
Organized, good interpersonal skills, capable of working in a multidisciplinary context internally and internationally
Fluent in English – Strong written (including report writing) and verbal communication skills
Mobility is essential, particularly for collaboration with foreign DORIS subsidiaries and participation to surveys in France and abroad, both offshore and onshore

Job Responsibility

Definition of fire detection and gas leak detection means
Definition of active and passive firefighting measures (sizing of pumps and fire network, hydraulic calculations)
Definition of installation safety philosophies (drainage, emergency shutdown and depressurization, flares and vents)
Definition of emergency evacuation means
Hazardous area classification study (ATEX)
Modelling of gas leak or fire scenarios using software such as PHAST
Preparation of specifications for fire protection, fire and gas detectors and safety equipment
Plot plan reviews and 3D model reviews
Preparation of safety plans
Preparation of technical bid evaluation and follow-up of subcontracted safety studies

Fulltime

Lead Technical Safety / Loss Prevention Engineer

DORIS France is looking for an experienced safety engineer who should act as lea...

Location

France , Paris

Salary:

Not provided

Doris Group

Expiration Date

Until further notice

Requirements

Masters or Bachelors degree in engineering with specialization in industrial risk control, loss prevention or industrial safety
Minimum 10 years’ experience in offshore & onshore safety engineering for Oil & Gas project
Fluent English – Good written (including report writing) and verbal communication
Good working knowledge of applicable regulations, codes of practice, international standards
Strong knowledge of PHAST and Pipenet
Familiar with 3D model viewer software Naviswork
Mobility required in particular for collaboration with foreign DORIS subsidiaries and participation to surveys in France and abroad offshore and onshore

Job Responsibility

Perform, lead and coordinate work for technical safety documentation during engineering of projects
Participation in safety workshops on project (eventually chairing ) HAZOP, HAZID, SIL review…
Participation to Plot plan reviews and 3D model reviews
Preparation and supervision of site survey, onshore and offshore
Vendor technical follow-up including Request For Quotation preparation, technical clarification and Vendor data review
Interfacing with client and internal project teams
Coordination of safety engineers team
Preparation of quotation offers, the technical bid evaluation and the follow-up of subcontracted safety studies (FRA, ERA, EERA, QRA, TRA, dropped object study, ship collision study, etc) with direct communication with our clients/subcontractors
Liaise and cooperate with other DORIS technical disciplines (process, layout, 3D models, structure, mechanical rotating, pipeline…) as part of your assignment on projects
Responsible (and report to the project management) for the progress of your discipline

Fulltime

Technical Safety / Loss Prevention – Senior Engineer

At DORIS you will be joining a fast-moving and technically diverse environment. ...

Location

France , Paris

Salary:

Not provided

Doris Group

Expiration Date

Until further notice

Requirements

Masters or Bachelors degree in engineering with specialization in industrial risk control, loss prevention or industrial safety
Minimum 5 years’ experience in offshore & onshore safety engineering for Oil & Gas project
Fluent English – Good written (including report writing) and verbal communication
Good working knowledge of applicable regulations, codes of practice, international standards
Strong knowledge of PHAST and Pipenet
Familiar with 3D model viewer software Naviswork
Mobility required in particular for collaboration with foreign DORIS subsidiaries and participation to surveys in France and abroad offshore and onshore

Job Responsibility

Prepare technical safety documentation during engineering of projects
Participation in safety workshops on project (eventually chairing ) HAZOP, HAZID, SIL review…
Participation to Plot plan reviews and 3D model reviews
Preparation and supervision of site survey, onshore and offshore
Vendor technical follow-up including Request For Quotation preparation, technical clarification and Vendor data review
Interfacing with client and internal project teams
Responsible for the preparation of quotation offers, the technical bid evaluation and the follow-up of subcontracted safety studies (FRA, ERA, EERA, QRA, TRA, dropped object study, ship collision study, etc.) with direct communication with our clients/subcontractors
Participate in maintaining DORIS experience and adapt methodologies and knowhow to the evolution of state of the art and to the market needs
Involvement in R&D activities through internal studies and development of engineering tools

Fulltime

Principal Systems & Safety Engineer

Starship Technologies is revolutionizing deliveries with autonomous robots. We'r...

Location

Estonia , Tallinn

Salary:

Not provided

Starship Technologies

Expiration Date

Until further notice

Requirements

Extensive experience in systems engineering, compliance, safety, or a related role
Familiarity with product safety standards (e.g., IEC 61508, ISO 26262, UL 3300)
Proven experience writing and managing technical requirements
Strong background in risk assessment methodologies (e.g., FMEA, HARA)
A systems-level thinker
A passion for building safe, complex systems
A growth mindset
A collaborative spirit
A proactive problem-solver

Job Responsibility

Driving improvements to our compliance framework
Translating standards into requirements
Analysing system architecture
Conducting technical risk assessments
Contributing to product certifications
Developing validation strategies

What we offer

Opportunity to work on industry-leading self-driving delivery robot technology on a uniquely large scale
You can immerse yourself in the world of technology and innovation
You will have a chance to work with people with a strong inner burning and motivation
You’ll have endless opportunities to learn from our inspirational, talented team members across the globe

Senior Dam Safety Engineer

Our company has an immediate opening for a Senior Dam Safety Engineer with a str...

Location

United States , Henniker

Salary:

Not provided

Gomez and Sullivan Engineers

Expiration Date

Until further notice

Requirements

BS in civil or geotechnical engineering, or other appropriate field (MS preferred)
Registered as a Professional Engineer and committed to maintaining registrations in multiple northeastern states
Qualified to become a FERC Part 12 inspector immediately, if not already approved
Excellent verbal and written communication skills
15+ years of experience preferred in the following areas: Project management
Geotechnical engineering related to dams and water retaining structures
Dam safety evaluations and design
Development, implementation, and evaluation of geotechnical investigation, testing, and monitoring programs
Evaluation of earthquake response of embankments
Client interaction and staff mentoring

Job Responsibility

Oversee, coordinate, and direct design teams for FERC and state-regulated projects
Perform dam safety evaluations and design, including FERC Part 12 inspections
Perform earthen embankment design and geotechnical evaluation of earthen dams (large and small), as well as civil works projects
Develop geotechnical monitoring and testing programs as well as analysis of results
Develop and/or review construction sequencing, design plans and specifications, and permit applications for dam-related civil projects
Lead technical discussions with regulators and clients as well as at public meetings
Technical writing for project documents, as well as review of other engineers’ technical writing
Technical guidance and mentoring for other engineers in their project work and professional development
Marketing of professional services, proposal writing, cost estimating, and project scheduling

What we offer

Medical, dental, and vision insurance
Competitive vacation, compensation time, and flexible holiday benefits
Paid sick leave and the ability to establish an extended medical leave account
Education assistance and professional development programs
Parental leave and Dependent Care FSA
Short- and long-term disability
Life insurance

Fulltime

Occupational Safety Engineer

Location

Brazil , São José dos Campos

Salary:

7000.00 BRL / Month

Rema Tip Top

Expiration Date

Until further notice

Requirements

Technical or higher education
36 months of experience in the role, in the sector in which the website operates, is desirable

Job Responsibility

Release of piping systems after completion of assembly
issuance of certificate of completion of services
release of hydrostatic tests
issuance of inspection reports
non-compliance reports

What we offer

Meal voucher
food voucher
life and personal accident insurance
medical insurance
dental insurance
pharmacy insurance
transportation voucher

Fulltime

Cyber & Functional Safety Engineer

We are looking for a Cyber & Functional Safety Engineer to support the design, a...

Location

Italy , Torino

Salary:

Not provided

RE:LAB

Expiration Date

Until further notice

Requirements

Technical background (e.g., degree in electronic engineering, computer science, automation, mechatronics or similar fields)
Basic understanding of cybersecurity principles for embedded and connected systems
Basic knowledge of functional safety concepts
Ability to read and contribute to hardware/software technical specifications
Strong analytical skills, problem solving abilities, and teamwork in multidisciplinary environments

Job Responsibility

Support the definition and management of cybersecurity and functional safety requirements throughout the product lifecycle
Collaborate with hardware and software development teams to integrate security and safety measures into system architectures
Contribute to risk assessment activities, hazard analysis, and risk evaluation
Participate in the preparation of technical documentation and reports
Support verification, validation, and internal/external audits related to safety and cybersecurity
Keep up to date with relevant standards and industry best practices

Fulltime

R&d electrical engineer - nuclear safety assessment

We are seeking an R&D Electrical Engineer with nuclear weapons experience to ass...

Location

United States , Albuquerque

Salary:

114000.00 - 227500.00 USD / Year

Sandia National Laboratories

Expiration Date

Until further notice

Requirements

Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development
Ability to obtain and maintain a DOE Q clearance
Graduate degree in Electrical Engineering or a highly related field where an independent research project was a graduation requirement
Ability to work independently and collaborate well in a multidisciplinary team of designers and test engineers
Outstanding verbal and written skills, including the ability to develop and present briefings
Experience working on engineering design, qualification, production, or related modeling/simulation projects
Expertise in electrical circuit design and analysis: Proficiency in power electronics, micro-electronics, integrated circuits, and analog and digital circuit design applied to safety-critical systems, including RF, optical, or radar sensors
Proficiency in safety-analysis methods: Strong understanding of fault-tree analysis, failure-modes-and-effects analysis, and margin quantification, with a background in reliability engineering or advanced margin-quantification frameworks
Experience with systems engineering: Demonstrated experience in systems engineering for nuclear or high-consequence weapons systems, including familiarity with the SNL nuclear weapon product realization process and nuclear weapon safety standards and related DOE orders
System-of-systems thinking: Experience applying system-of-systems thinking to electrical integration, ensuring end-to-end functionality

Job Responsibility

Independently review detailed technical documents and identify salient issues related to electrical design and testing in the context of nuclear safety
Engage with weapon system, component design, assurance, and other surety organizations, with a focus on electrical components and systems
Maintain awareness of issues related to design, development, production, maintenance, and dismantlement of weapon systems, particularly in the electrical domain
Assess tests, materials, and components for adequacy against requirements, emphasizing electrical testing and analysis
Evaluate procedures, product specifications, and standards for compliance with nuclear safety requirements
Lead independent safety assessments of nuclear weapon systems and components, analyzing responses under thermal, shock, vibration, and EMI/EMC environments, utilizing your expertise in electrical circuit design and analysis
Define problem scope and requirements, develop technical approaches, and apply quantitative and qualitative methods (e.g., fault-tree analysis, failure-modes-and-effects analysis, margin quantification)
Design experiments or simulations to evaluate safety-critical subsystems, collaborating with system and test engineers to verify requirements, particularly in electrical testing
Develop analytical frameworks and digital models to support risk-informed decisions leveraging your experience in system-of-systems thinking for electrical integration
Mentor junior engineers in safety-analysis techniques and review their deliverables for technical accuracy

What we offer

Challenging work with amazing impact that contributes to security, peace, and freedom worldwide
Extraordinary co-workers
Some of the best tools, equipment, and research facilities in the world
Career advancement and enrichment opportunities
Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home)
Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance

Fulltime

Technical Safety Engineer

Lobellia

Location:
Qatar , Doha

Category:
Energy

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
January 02, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Technical Safety Engineer

Junior Technical Safety / Loss Prevention Engineer

Lead Technical Safety / Loss Prevention Engineer