Soldering technician Job at Randstad (Almelo)

Electrical Lab Technician

As an Electrical Lab Technician at Magdrive, you will be the bridge between prot...

Location

United Kingdom , Harwell Campus, Oxfordshire

Salary:

40000.00 - 50000.00 GBP / Year

Magdrive

Expiration Date

Until further notice

Requirements

5+ years of experience in a similar role within a manufacturing/engineering environment
Knowledge of ESD and lab safety practices
Proficiency with test equipment such as oscilloscopes, DAQ, power supplies etc
Familiarity with PCB design software and ability to interpret circuit diagrams/layouts
Electrical wiring and harness assembly experience (soldering/crimping)
Fine-pitch soldering and component-level rework skills (ESA-certified soldering a plus – training can be provided)
Dedicated to high quality standards with strong attention to detail

Job Responsibility

Carrying out electrical wiring and harness assembly for lab and thruster systems
Running electrical tests (including automated testing), collecting and reporting data
Performing soldering, fine-pitch component rework, and repair of prototype/production boards
Maintaining the lab environment, ensuring it is well equipped, tidy, and safe
Procuring, maintaining, calibrating, and organising lab equipment and tools
Ensuring compliance with lab rules, ESD safety, and general health & safety procedures
Documenting results, test procedures, and observations for traceability

What we offer

25 days annual leave + bank holidays, plus long-service awards (up to 30 days)
Private medical insurance
Flexible working hours
Remote working where possible
Financial support for home office setup

Fulltime

Electronics Technician II

Electronics Technician II position at Synectic Solutions, Inc. (SSI), a governme...

Location

United States , Camarillo

Salary:

32.00 USD / Hour

Synectic Solutions Inc

Expiration Date

Until further notice

Requirements

U.S. Citizenship and Active DoD Secret Clearance
IPC/WHMA-A-620 Certified Specialist (CIS)
J-STD-001 Certified Specialist (CIS)
Connector Assembly Qualification
Minimum 2-4 years of cable assembly experience
Ability to stand, walk, sit, use both hands, and carry/lift to 50 lbs
Ability to execute installation/lifting of heavy equipment and use of/climbing ladders
Proficiency in crimping, soldering, and harness build rework
Capable of reading and following cable drawings and travelers

Job Responsibility

Execute cable manufacturing operations
Train junior technicians
Ensure build compliance
Support QA inspections
Perform standard cable build, soldering, and testing under supervision
Ensure adherence to IPC Class 3 workmanship standards
Support assembly and testing processes
Review schematics and other technical documentation
Maintain, clean, and perform basic upkeep of equipment
Communicate updates and technical issues to Lead

Fulltime

Wiring Harness Technician

Harbinger Motors is looking for a wiring harness technician to support prototype...

Location

United States , Garden Grove

Salary:

35.00 - 40.00 USD / Hour

Harbinger Motors

Expiration Date

Until further notice

Requirements

Experience with building wiring harnesses from scratch
including soldering, crimping, terminating, etc.
Experience with soldering components onto PCBAs under a microscope
Ability to read and understand wiring diagrams and schematics
Ability to multi-task and work in a fast-paced environment
Ability to work independently and/or as part of a team
High school diploma or equivalent certification
6+ years of experience in harness manufacturing

Job Responsibility

Assemble, install, and repair harnesses according to detailed technical drawings and schematics
Use essential tools and test equipment for harness builds
Work under a microscope to solder components onto PCBAs
Maintain a clean lab environment

What we offer

overtime available

Fulltime

Assembly technician

Are you interested in a full-time job in a technical field? Would you like to ma...

Location

Netherlands , Best

Salary:

2800.00 - 3000.00 EUR / Month

Randstad

Expiration Date

April 28, 2026

Requirements

Have experience with working according to technical drawings and work instructions
Have good command of the Dutch and/or English language
Technical affinity or work experience
A completed MBO qualification is a pre
Soldering work experience and/or certificates

Job Responsibility

Assemble parts (mechanical, electrical, electronic) for MR body coils and cabinets using drawings and instructions
Connect wires and cables accurately and safely
Assemble and solder small components onto MR body coils

What we offer

Travel allowance
The possibility of a contract at Philips
8.33% holiday allowance & 13th month
Building up pension after your first day

Fulltime

Repair Technician

Syntech Recruitment are excited to be supporting an aviation overhaul and repair...

Location

United Kingdom , Alton

Salary:

31775.00 GBP / Year ▼

SYNTECH RECRUITMENT LTD

Expiration Date

Until further notice

Requirements

Strong ability to read schematic and engineering drawings
Proven experience with soldering and electronics/electro-mechanical repair
Fault-finding experience using scopes, meters and standard workshop tools
Transferable repair background (aviation or industries such as white goods/electronics repair)
Computer literate (Microsoft Office & MRP systems)

Job Responsibility

Reading schematic drawings and circuit diagrams to diagnose and repair faults
Carrying out soldering, testing and refurbishment of electronic and electro-mechanical assemblies
Using oscilloscopes, multimeters and other bench equipment to fault find
Completing work to CAA, EASA and FAA Part 145 standards
Maintaining accurate records using Microsoft Office and the MRP system
Ensuring all work cards and job packs are completed correctly

What we offer

25 days holiday + bank holidays
Daily overtime at 1.5x basic rate
Parking

Fulltime

Harness Integration Technician

Build production-quality wire harnesses from drawings/BOMs/work orders in a fast...

Location

United States , San Jose

Salary:

30.00 - 45.00 USD / Hour

Figure

Expiration Date

Until further notice

Requirements

2–5+ years building wire harnesses/cable assemblies in manufacturing or prototyping
Ability to read prints/schematics and follow work instructions with minimal supervision
Proficiency in crimping and soldering (selective tinning, shields/drain wires, coax/twisted pair)
Hands-on with tooling: strippers, gauges, pull testers, manual/pneumatic crimpers (Daniels or similar), soldering stations, heat guns
Working knowledge of IPC/WHMA-A-620 (Class 2/3) and familiarity with J-STD-001
Strong quality and schedule focus: high first-pass yield and low rework

Job Responsibility

Build build-to-print harnesses: cut, strip, crimp, solder, braid/sleeve, heat-shrink, basic potting, final terminations
Read and follow drawings, schematics, BOMs, work orders, and ECOs
record traceability in ERP/routers
Crimp and verify terminals/contacts (TE/AMP, Molex, JST, Amphenol/LEMO, etc.) with specified tooling
document pull tests when required
Print/apply labels and heat-shrink markers per print
Perform electrical tests: continuity, insulation/hipot, and basic troubleshooting with DMM/cable testers/fixtures
Execute rework to spec (e.g., IPC/WHMA-A-620) and support NCMR/MRB containment
Maintain 5S/ESD and safety
suggest process and DFM improvements

Fulltime

Assembly Technician I (Cables)

iAutomation, a high technology distributor of industrial automation components, ...

Location

United States , Franklin

Salary:

Not provided

iAutomation

Expiration Date

Until further notice

Requirements

High School Education or GED
Some manufacturing experienced desired
Basic print reading and experience in wire dressing and termination
Proficient in reading and measuring using a tape measure
Operate hand pallet jacks to move material within plant
Able to lift, squat, bend, reach, and stand as work requires
Work involves frequent lifting of materials and product up to 30 pounds
Frequent use of hand tools
Long periods of standing

Job Responsibility

Mechanical assembly of extrusion frames
Minimal electro-mechanical assembly using proper grounding techniques
Soldering application, custom cable terminations
Following work instructions, perform repetitive assembly operations
Produce quality work to specified time standards
Execute in-process checks using visual inspection and check lists
Possess an aptitude for cross functional training to reduce takt time
Utilize a variety of hand tools such as screw drivers, hex keys, drills, saws, tape measures and fixtures
Coordinating with teammates participate in manually integrating large subassemblies to complete a final assembly
Willingness to work overtime as needed

Fulltime

New

Electrical Rework Technician

We are seeking an Electrical Rework Technician to own PCBA rework, micro-solderi...

Location

United States , San Jose

Salary:

30.00 - 50.00 USD / Hour

Figure

Expiration Date

Until further notice

Requirements

5+ years of professional experience in electronics soldering and PCBA rework
Extensive hands-on experience with fine-pitch and high-density PCBAs
Proven expertise in micro-soldering under microscope
Strong understanding of PCB construction, component packages, and thermal behavior
Ability to consistently produce clean, reliable, and inspectable rework
High attention to detail and pride in workmanship
Comfortable working independently on high-value, time-critical hardware

Job Responsibility

Perform precision soldering and rework on complex PCBAs to high workmanship standards
Execute advanced micro-soldering tasks, including: Fine-pitch SMD components, High pin-count connectors, QFN, LGA, and BGA rework (including reflow and reballing)
Diagnose and repair damaged pads, traces, vias, and connectors
Support engineering debug by implementing board modifications, ECOs, and bodge rework
Work from schematics, board layouts, and engineering guidance to execute accurate rework
Document rework actions, common failure modes, and lessons learned
Help define, improve, and standardize rework procedures and workmanship guidelines
Train and support technicians and engineers on soldering best practices
Maintain soldering tools, microscopes, rework stations, and consumables
Collaborate closely with Electrical Engineering, Hardware Integration, and Manufacturing teams

Fulltime

Soldering technician

Randstad

Location:
Netherlands , Almelo

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
May 23, 2025

Expiration:
April 01, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Soldering technician

Electrical Lab Technician

Electronics Technician II

Wiring Harness Technician

Assembly technician

Repair Technician

Harness Integration Technician

Assembly Technician I (Cables)

Electrical Rework Technician

Soldering technician

Randstad

Location:Netherlands , Almelo

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:May 23, 2025

Expiration:April 01, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Soldering technician

Electrical Lab Technician

Electronics Technician II

Wiring Harness Technician

Assembly technician

Repair Technician

Harness Integration Technician

Assembly Technician I (Cables)

Electrical Rework Technician

Location:
Netherlands , Almelo

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
May 23, 2025

Expiration:
April 01, 2026