CrawlJobs Logo

Senior Power Electronics Engineer

enercomp.in Logo

EnerComp Solutions Pvt Ltd

Location Icon

Location:
India , Ahmedabad ▼

Category Icon
Category:
IT - Software Development

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

We are seeking a Senior Power Electronics Engineer with strong hands-on experience in Electronic Speed Controller (ESC) design for BLDC/PMSM motors. This role focuses on end-to-end ESC hardware design, along with development of other power electronics subsystems used in advanced applications such as UAVs, robotics, and electric propulsion systems. The ideal candidate should be capable of independently designing, prototyping, testing, and refining high-current, high-reliability ESCs, and working closely with firmware teams. Experience with AM32 firmware is strongly preferred.

Job Responsibility:

  • Design and develop BLDC/PMSM ESC hardware from concept to production
  • Design and validate: MOSFET-based power stages
  • Gate driver circuits (bootstrap, dead-time, protection features)
  • Current sensing (shunt / inline / Hall-based)
  • Voltage, temperature, and fault protection circuits
  • Support control interfaces such as PWM, DShot, UART, and CAN (DroneCAN)
  • Work closely with firmware engineers on AM32-based ESC firmware
  • Support hardware–firmware integration, tuning, and debugging
  • Assist in telemetry, fault reporting, and performance optimization
  • Design supporting power electronics including: DC–DC converters (buck / boost / auxiliary rails)
  • Battery input protection (reverse polarity, surge, TVS, soft-start)
  • Power distribution and filtering circuits
  • Perform thermal design, derating analysis, and reliability improvement
  • Implement EMI/EMC mitigation through circuit design and PCB layout guidance
  • Prototype bring-up and lab debugging
  • Switching waveform analysis using oscilloscopes and current probes
  • Thermal testing under load and stress conditions
  • Root-cause analysis of failures and design iteration
  • Support production validation and field issue resolution
  • Prepare schematics, BOMs, design notes, and test reports
  • Work with PCB layout engineers to ensure high-current layout best practices
  • Collaborate with mechanical, firmware, and system teams

Requirements:

  • B.E. / B.Tech / M.Tech in Electronics, Electrical, or Power Electronics
  • Minimum 5 years of relevant experience in power electronics
  • Hands-on experience in ESC design is mandatory
  • Prior experience with UAV, EV, robotics, or motor-drive systems is preferred
  • Strong fundamentals in power electronics
  • Practical experience with: MOSFET selection and loss calculations
  • Gate driver design and protection strategies
  • High-current PCB design concepts
  • Current sensing and fault handling
  • Schematic design using KiCad or Altium
  • Proficiency with lab equipment (oscilloscopes, electronic loads, thermal tools)

Nice to have:

  • Experience with AM32 firmware (highly preferred)
  • Familiarity with BLHeli or VESC ecosystems
  • CAN / UART-based ESC telemetry
  • EMI/EMC debugging experience
  • Ability to review or perform PCB layout for power electronics
What we offer:
  • Healthcare, dental, vision, life insurance, Flexible Spending Account (FSA), Health Savings Account (HSA)
  • Vacation, Sick, and Holiday paid leaves
  • Pre-tax commuter benefits (parking and transit)
  • Brand-name product and services in categories like travel, electronics, health, fitness, cellular, and more
  • Only a couple blocs from BART, Caltrain, Highway 101, carpool pickup, and Bay Bridge
  • Tuesday Dinners, Monthly Lunch Mixers, Monthly Happy Hour, Annual day event
  • Play any sport with colleagues and the bill is covered
  • Peet's and Philz coffee provided all day to order and pantry snacks

Additional Information:

Job Posted:
February 19, 2026

Icon
EnerComp Solutions Pvt Ltd - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Senior Power Electronics Engineer

Principal Power Electronics Engineer

We are seeking a highly experienced and hands-on Principle Power Electronics Eng...
Location
Location
Canada , Burnaby
Salary
Salary:
130000.00 - 160000.00 CAD / Year
equinoxpowerinc.com Logo
EQUINOX POWER
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s Degree in Electrical Engineering or equivalent (Master’s Degree or Ph.D. is a strong plus)
  • Minimum 10 years of experience in designing high-performance, cost-effective power conversion products, with a proven track record of successful project delivery
  • Extensive experience with high-frequency switch mode power conversion products and 3-phase AC systems
  • Expertise in designing resonant power conversion topologies and advanced circuit topologies utilizing wideband gap devices (SiC or GaN MOSFETs)
  • In-depth understanding of feedback loop stability and analysis, with the ability to optimize complex control systems
  • Experience in the design and/or fabrication of high-frequency magnetics utilizing ferrite core materials
  • Proficiency in both analog and digital embedded control design, with the ability to read and debug firmware code
  • Strong background in EMC testing (FCC/CE) and safety testing (CSA/UL), with a deep understanding of compliance standards
  • Proficiency in using simulation tools such as PSIM, PLECS, LTSpice, MATLAB, and Simulink
  • Exceptional analytical and problem-solving skills, with a proactive approach to resolving complex technical issues
Job Responsibility
Job Responsibility
  • Lead the design and development of advanced power electronics systems, including inverters, converters, digital controllers, and power management systems
  • Oversee the creation of detailed engineering specifications, schematics, and layouts for power electronics products, ensuring accuracy and adherence to project requirements
  • Guide the team in the design, product development, testing, and troubleshooting of high-performance power conversion products: AC-DC, DC-DC, DC-AC, or AC-AC at various power levels ranging from 1kW to 30kW
  • Ensure compliance with regulatory requirements (e.g., UL, CSA, NEBS, FCC, CE, etc.) and drive the certification process
  • Architect and develop DSP or MCU-controlled (fully digital) power conversion systems from concept to commercial product, leveraging the latest technologies and methodologies
  • Develop and manage project timelines, milestones, and deliverables, ensuring projects are completed on time, within scope, and budget
  • Foster a culture of innovation, continuous improvement, and technical excellence within the engineering department
  • Prepare and review detailed technical documentation, including design reports, test reports, and user manuals
  • Present project status updates, technical findings, and strategic recommendations to senior management and stakeholders
  • Mentor and coach junior engineers, providing technical guidance and support to enhance team capabilities
What we offer
What we offer
  • Competitive salary and a benefits package
  • Extended health, dental, and vision coverage
  • 2 weeks paid vacation in the first year, plus 1 week off during the Christmas holiday season
  • Start-up environment fostering collaboration and innovation
  • Accelerated professional growth and development through working with leading-edge projects
  • Fulltime
Read More
Arrow Right

Electrical Engineer / Senior Electrical Engineer

Join Realta Fusion, as an Electrical Engineer / Senior Electrical Engineer, you’...
Location
Location
United States , Madison
Salary
Salary:
Not provided
realtafusion.com Logo
Realta Fusion Inc.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • MS (+ 2 years’ experience), BS (+ 5 years’ experience), or equivalent experience in Electrical Engineering or a related field
  • Familiarity with EMI/EMC techniques and simulation tools (ANSYS Maxwell, Simplorer, HFSS), circuit simulation tools (SPICE, SIMetrix/SIMPLIS or equivalent), PCB design software tools (ALTIUM, ORCAD, or KICAD), and Load Flow software tools (ETAP, PSS-E, or TARA)
  • Exceptional interpersonal and communication skills (written, verbal, public presentation) to collaborate effectively with colleagues, external partners, and stakeholders
Job Responsibility
Job Responsibility
  • Support designing, assembling, testing, troubleshooting, and support of operations of high voltage and power transmission systems for driving pulsed electrical loads for WHAM, Anvil, and the Forge
  • Support assessment of power quality studies when necessary
  • Contribute to designing, procurement, construction, and commissioning of high-power electrical systems to drive pulsed loads (< 5 s) at voltages up to 500 kV
  • Support development of electrical system architecture and work with designers to produce electrical schematics and installation drawings
  • Collaborate with operators of power systems through machine commissioning and, for development machines, through the lifetime of the machine
  • Demonstrate rigorous engineering practices including management of cost, schedule, and resource estimates as they pertain to your design, build, and delivery timelines
  • Contribute to modelling, simulating, analyzing, and validating power electronics circuits, magnetic components and control strategies for power supplies applied to highly inductive loads
  • Contribute to design, prototyping, and fabrication of PCBs at various voltage thresholds for various applications
  • Work cross-functionally with scientists, engineers, and technicians to refine system requirements and ensure seamless integration
  • Synthesize and present technical work internally and externally, communicate daily with project teams and leadership to support programmatic needs
What we offer
What we offer
  • Competitive compensation package, including equity stock options
  • Comprehensive benefits including health, dental, and vision insurance, plus a retirement savings plan
  • Flexible paid time off (PTO) to support work-life balance
  • Fulltime
Read More
Arrow Right

Senior Design Engineer

The Senior Electrical Design Engineer, will lead and deliver technically robust ...
Location
Location
United Kingdom , Haywards Heath/Manchester
Salary
Salary:
50000.00 - 80000.00 GBP / Year
hederahiring.com Logo
Hedera Hiring Ltd
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical or Electronic Engineering (minimum)
  • Chartered or Incorporated Engineer status (or actively working toward it)
  • Minimum 5 years' experience in the electricity industry, with hands-on design up to 33kV (preferably 132kV)
Job Responsibility
Job Responsibility
  • Deliver and review HV/LV electrical designs up to 132kV
  • Ensure all design work complies with current UK legislation and electrical safety regulations
  • Conduct EMT and RMS simulations (e.g., using DIgSILENT, PSCAD)
  • Perform advanced power system studies including protection, discrimination, cable sizing, power flow, and short circuit analysis
  • Prepare and review grid compliance studies (G5/5, P28, FRT, reactive power, etc.)
  • Specify HV switchgear and accessories for substations
  • Provide technical support for ICP connections and manage design processes
  • Guide, mentor, and evaluate junior designers and external consultants
  • Maintain strong communication with operational teams, project managers, and clients
What we offer
What we offer
  • Competitive salary based on experience and qualifications
  • Private medical insurance
  • Income protection insurance
  • 4x death in service cover
  • 28 days paid holiday (including bank holidays)
  • Cycle to Work Scheme
  • Company pension scheme
  • Employee Assistance Programme
Read More
Arrow Right

Senior Hardware Design Engineer

This role involves being part of a dynamic and highly skilled R&D team that crea...
Location
Location
Singapore , Singapore
Salary
Salary:
Not provided
https://www.hpe.com/ Logo
Hewlett Packard Enterprise
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Must have a Bachelor’s or Master’s degree in Electronic Engineering or related fields
  • Minimum 12 years of experience in systems design (integrated electrical circuits, designing complex circuit like servers, cellphone etc.)
  • Excellent knowledge and deep technical understanding of both digital and analog circuit design
  • Strong analytical and problem-solving skills
  • Proven technical leadership skills and experience in mentoring and guiding teams
  • Good knowledge and keen interest in high-speed design, signal integrity issues and power distribution techniques
  • Hands-on experience in measuring and characterizing high-speed digital signals
  • Board design experience with Cadence CAD design tools like Orcad, Allegro
Job Responsibility
Job Responsibility
  • Providing technical leadership and direction to the hardware design team
  • Translating design requirement documents to design architecture
  • Collaborating with a multi-sited product development team to integrate deliverables toward the release of new products into production
  • Innovatively solving issues, driving completion of the project to schedule, and collaboratively networking with other technical contributors
  • Owning all aspects of assigned areas, including feasibility study, design, verification and debug
What we offer
What we offer
  • Health & Wellbeing
  • Personal & Professional Development
  • Unconditional Inclusion
  • Fulltime
Read More
Arrow Right

Senior Hardware Design Engineer

We’re looking for a Senior Hardware Design Engineer to lead the design, developm...
Location
Location
United Kingdom , Colchester
Salary
Salary:
55000.00 - 70000.00 GBP / Year
cooperlomaz.co.uk Logo
Cooper Lomaz
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree (Bachelor’s or Master’s) in Electronic Engineering, or equivalent industry experience
  • Strong background in hardware design and development
  • Skilled in schematic capture and PCB design using Altium Designer
  • Experience in the test and measurement industry (preferred)
  • High-speed digital design, RF, power management, and EMI/EMC
  • Confident debugging using standard lab equipment
  • Experience working in cross-disciplinary engineering teams
  • Knowledge of FPGA design (VHDL/Verilog) or microcontroller systems
  • Understanding of embedded software principles
Job Responsibility
Job Responsibility
  • Work with product teams to define technical requirements and design specifications
  • Lead the design and development of digital, analogue, and RF hardware
  • Create detailed schematics and PCB layouts using Altium Designer
  • Select components, run simulations, and perform technical analysis to ensure strong performance
  • Develop and carry out test plans for prototypes and final products
  • Debug, validate, and verify hardware using lab equipment such as oscilloscopes, logic analysers, and spectrum analysers
  • Collaborate closely with software, mechanical, test, NPI, and manufacturing teams
  • Manage large hardware development projects through the full lifecycle-from concept to end-of-life
  • Mentor junior engineers and support their technical development
  • Produce and maintain clear technical documentation
  • Fulltime
Read More
Arrow Right

Senior Electrical Engineer, Video

As a Senior Member of Axon's Video Electrical Engineering team, you will lead th...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering or similar engineering discipline
  • 7+ years of industry embedded electronics design experience with a major focus on designing high-speed, high-density, portable, battery-powered devices, robotics, or low-power vehicular embedded circuits
  • Creative and passionate about innovative design and cutting-edge technology
  • Demonstrated ownership of embedded electronics design across multiple subsystems
  • Skilled in high-speed, high-density hardware design, including system architecture development, component selection, schematic design, PCB layout management, design verification testing and debug
  • Proficient leading electronics design and development from concept to mass production
  • Experience with technical oversight of design partners, ODMs, and JDMs leading to successful electronics design
  • Strong proficiency with point of load power supply design (Switch mode, linear regulators), PMIC integration, power tree development, and power consumption analysis
  • Experience with Lithium batteries and battery charging circuit design
  • Experience with RF transceiver integration including LTE, Wi-Fi, and GNSS
Job Responsibility
Job Responsibility
  • Own the design of critical electronic circuits and systems
  • Collaborate globally with cross-functional engineering teams to deliver world-class products
  • Mentor and inspire junior engineers, fostering technical growth across the team
  • Research, propose, and develop innovative, industry leading circuit designs for Axon’s future-generation video products, wired and wireless devices, and/or low power accessories
  • Lead project team EE’s and design partners, joining forces to achieve successful completion of hardware objectives
  • Use OrCAD to create embedded mixed-signal circuit schematics, integrating components like application processors, image sensors, high speed memory, high speed digital communication buses, RF transceivers, power supplies, battery charging systems, and more
  • Partner with PCB Design engineers to define, review, and optimize printed circuit board layout designs using Allegro or other layout tools
  • Bring up, characterize, optimize, and debug systems and circuits using lab tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc
  • Team up with RF Engineers to integrate and validate critical RF circuitry for wirelessly connected devices
  • Assess design outcomes, test results, and related information and present findings to design team and management
What we offer
What we offer
  • Competitive salary and 401K with employer match
  • Paid time off at your discretion
  • Robust parental leave policy
  • An award-winning office/working environment
  • Ride along with police officers to see them use our technology and get inspired
  • Fulltime
Read More
Arrow Right

Senior Electrical Engineer

At Product Creation Studio, we are looking for a senior-level electrical design ...
Location
Location
United States , Seattle
Salary
Salary:
Not provided
productcreationstudio.com Logo
Product Creation Studio
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 7+ years experience as a design engineer developing custom electronics
  • BSEE
  • MS or Ph.D. a plus
  • Experience on multiple projects supporting new product introduction through all phases of development from concept to production
  • Experience with implementing design incorporating industry-standard peripherals such as Wi-Fi, USB, Bluetooth, RS232, and Ethernet
  • Experience integrating designs using 32-bit+ ARM, RISC, or PC architecture application processors or microcontrollers
  • Experience with implementing analog designs including filters and power conversion
  • Experience developing designs with industry-standard interfaces such as I2C, I2S, SPI, PCI, RS232
  • Experience designing for signal integrity and low EM emission and susceptibility
  • Experience optimizing designs for manufacturing including testability, component sourcing, life cycle, ease of assembly, and cost
Job Responsibility
Job Responsibility
  • Support and lead electrical engineering in all phases of product development that include scoping and project planning, assessing feasibility, identifying and de-risking technical elements, developing and validating product specifications, determining system architecture, detailed circuit design, testing and design validation, agency compliance, and manufacturing support
  • Design custom electronics performing schematic capture, source new components, simulate and perform circuit analysis, implement or direct printed circuit board layout, oversee PCBA fabrication, develop test plans and validate reliability and performance
  • Design for Safety and EMC agency compliance requirements, perform or oversee agency certification testing, and mitigate issues
  • Mentor and provide technical oversight of other electrical engineers
  • Scope and determine work breakdown on projects, identify high-risk elements and plan and perform rapid prototyping or technical feasibility studies
  • Coordinate and collaborate with clients, program management, and other engineering disciplines
  • Identify issues, new scope, errors, or unplanned tasks in the course or project execution work with project management and the client to incorporate updates to the project plan or modify requirements or deliverables to meet schedule and budget constraints
  • Make aggressive but achievable commitments and deliver designs that meet quality and performance requirements on schedule and on budget
What we offer
What we offer
  • medical/dental/vision
  • FSA
  • 401k
  • creative, friendly work environment
Read More
Arrow Right

Senior Hardware Engineer

As a key contributor in the HW Sustaining group, you will be responsible for inv...
Location
Location
United States , San Jose
Salary
Salary:
117500.00 - 270000.00 USD / Year
https://www.hpe.com/ Logo
Hewlett Packard Enterprise
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree or higher in Electrical, Electronics, or Computer Engineering
  • 8+ years of hardware design, debug and testing experience at the board and system level
  • Expertise in debugging hardware problems using oscilloscopes, logic analyzers, and specialized networking test equipment such as IXIA/Spirent traffic analyzers, PCI analyzers, and in-circuit emulators
  • PCB design experience including schematic capture, PCB layout and routing
  • Familiarity with Cadence System Design tool suite
  • Knowledge of networking hardware and associated components and interfaces such as switch ASICs, PHY, SerDes, CPU subsystems, optics, high-speed serial links, PoE, PCIe, NVMe, SATA, I2C, and USB
  • Expertise in high speed circuit design and debug
  • Familiarity with signal and power integrity concepts and associated test and simulation tools
  • Ability to manage multiple concurrent priorities and make progress
  • Able to manage hardware debug and design projects and driving them to closure
Job Responsibility
Job Responsibility
  • Lead failure analysis for critical hardware issues reported from field and factory
  • Determine and document root cause and corrective actions (RCCA)
  • Extract and share 'Lessons Learned' from HW Sustaining failure analysis and share with appropriate Juniper teams to drive hardware quality improvement
  • Collaborate with other Engineering and Manufacturing / Operations teams to drive corrective actions and hardware quality improvements
  • Work with Customer Support teams to understand and address customer hardware concerns
  • Analyze hardware quality metrics and Repair Center findings to identify failure trends requiring investigation
  • Provide technical leadership into multi-sourcing and change management activities on shipping products
  • Review hardware test reports for new products prior to product release
  • Identify any quality concerns and work with the design teams to resolve
  • Mentor and guide junior members, foster a collaborative environment, and encourage curiosity and knowledge sharing
What we offer
What we offer
  • Comprehensive suite of benefits that supports physical, financial and emotional wellbeing
  • Career development programs to help achieve career goals
  • Inclusive culture celebrating individual uniqueness
  • Fulltime
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy