CrawlJobs Logo

Senior Mechanical Manufacturing Engineer

kodiak.ai Logo

Kodiak Robotics

Location Icon

Location:
United States , Mountain View

Category Icon
Category:
Manufacturing

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

150000.00 - 190000.00 USD / Year
Save Job
Save Icon
Apply Position

Job Description:

We are seeking a Mechanical Manufacturing Engineer to join our team in Mountain View, CA. The successful candidate will combine deep design knowledge with a strong on-the-line presence. Projects include bringing next generation designs into production and improving on existing designs. This position will be impactful to scaling up manufacturing for Kodiak. Frequent travel and on-call support is required.

Job Responsibility:

  • Advise team on design-for-assembly (DFA) and design-for-manufacturing (DFM) considerations
  • Assist in development of manufacturing bill of materials (MBOM)
  • Release design documents to manufacturing through PLM software (Arena)
  • Design mechanical systems in CAD software (SolidWorks)
  • Create content for work instructions, such as CAD graphics
  • Participate in first article inspections (FAI) and new product introduction builds (NPI) on assembly lines
  • Collect and document feedback from contract manufacturers and facilitate cross functional design improvements accordingly
  • Troubleshoot production and field quality issues, driving root cause and corrective actions
  • Collaborate with supply chain and manufacturing teams to revise designs with a focus on cost optimization

Requirements:

  • BS or equivalent experience in Mechanical Engineering
  • 5+ years of experience developing assemblies for production and facilitating their construction at scale with contract manufacturers
  • Relevant processes include: mechanical assembly, CNC milling, sheet metal bending, welding, and wire harnesses fabrication
  • Experience with 3D mechanical CAD (SolidWorks preferred, CATIA, NX, etc)
  • Experience with PDM and PLM (Arena and ePDM preferred, Teamcenter, etc)
  • Strong problem-solving skills and comfort being hands-on at the manufacturing line
What we offer:
  • Competitive compensation package including equity and biannual bonuses
  • Excellent Medical, Dental, and Vision plans through Kaiser Permanente, Anthem, and Guardian (including a medical plan with infertility benefits)
  • Flexible PTO and generous parental leave policies
  • Office perks: dog-friendly, free catered lunch, a fully stocked kitchen, and free EV charging
  • Long Term Disability, Short Term Disability, Life Insurance
  • Wellbeing Benefits - Headspace, One Medical, Gympass, Spring Health
  • Fidelity 401(k)
  • Commuter, FSA, Dependent Care FSA, HSA
  • Various incentive programs (referral bonuses, patent bonuses, etc.)

Additional Information:

Job Posted:
December 09, 2025

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Kodiak Robotics - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Senior Mechanical Manufacturing Engineer

Senior Engineer, Weld Manufacturing

Being an Engineer at Baxter means you play a critical role in helping us achieve...
Location
Location
United States , Batesville
Salary
Salary:
88000.00 - 121000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Engineering required
  • Over 2 years of job-related experience in manufacturing and weld engineering
  • Experience with Lean Manufacturing disciplines
  • Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
  • Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
  • A strong mechanical and metallurgical background with a thorough knowledge of GMAW, GMAW-P, RSW, GTAW is preferred
  • Knowledge of welding processes, equipment and robotic applications
  • Ability to develop, lead and execute multiple projects, simultaneously and still meet desired results
  • Demonstrated leadership of capital / CI projects focused on meeting departmental goals
  • Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions
Job Responsibility
Job Responsibility
  • Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
  • Troubleshoot new or existing product problems involving designs, materials, or processes
  • Provide technical expertise or support related to manufacturing
  • Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
  • Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
  • Perform nonconforming material analysis and create NCM reports
  • Work with Quality Control on reducing the NCMRs
  • Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
  • Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
  • Ability to design and set up weld robot cells for maximum efficiency
What we offer
What we offer
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • 2 Days a Year to Volunteer
  • medical and dental coverage
  • insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
  • Employee Stock Purchase Plan (ESPP)
  • 401(k) Retirement Savings Plan (RSP)
  • Flexible Spending Accounts
  • Fulltime
Read More
Arrow Right

Senior Engineer, Weld Manufacturing

The Senior Engineer, Weld Manufacturing at Baxter plays a critical role in impro...
Location
Location
United States , Batesville, Indiana
Salary
Salary:
88000.00 - 121000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Engineering required
  • Over 2 years of job-related experience in manufacturing and weld engineering
  • Experience with Lean Manufacturing disciplines
  • Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
  • Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
  • A strong mechanical and metallurgical background with a thorough knowledge of GMAW, GMAW-P, RSW, GTAW is preferred
  • Knowledge of welding processes, equipment and robotic applications
  • Ability to develop, lead and execute multiple projects, simultaneously and still meet desired results
  • Demonstrated leadership of capital / CI projects focused on meeting departmental goals
  • Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions
Job Responsibility
Job Responsibility
  • Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
  • Troubleshoot new or existing product problems involving designs, materials, or processes
  • Provide technical expertise or support related to manufacturing
  • Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
  • Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
  • Perform nonconforming material analysis and create NCM reports
  • Work with Quality Control on reducing the NCMRs
  • Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
  • Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
  • Ability to design and set up weld robot cells for maximum efficiency
What we offer
What we offer
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • 2 Days a Year to Volunteer
  • Medical and dental coverage that start on day one
  • Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
  • Employee Stock Purchase Plan (ESPP)
  • 401(k) Retirement Savings Plan with options for employee contributions and company matching
  • Flexible Spending Accounts
  • Fulltime
Read More
Arrow Right

Senior Manufacturing Engineer, Wing

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , San Jose
Salary
Salary:
122880.00 - 153600.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s or advanced degree in Aerospace, Mechanical, or Manufacturing Engineering (or equivalent experience)
  • 8+ years in aerospace manufacturing, with a focus on airframe assembly and composite structures
  • prototype or experimental aircraft experience strongly preferred
  • Proven track record of driving DFM principles for complex composite parts (layup, bonding, cure)
  • Expertise in advanced manufacturing tools (CAD, PLM, MES)
  • Strong leadership, communication, and cross-functional coordination skills to set direction and mentor a diverse engineering team
  • Ability to thrive in a dynamic, high-iteration environment, balancing big-picture program goals with hands-on, real-time build solutions
Job Responsibility
Job Responsibility
  • Provide overarching leadership and technical direction for airframe manufacturing processes, including composite layup, bonding, trimming, metallic integration, and assembly sequencing
  • Own the end-to-end lifecycle of airframe builds, collaborating with design, quality, and certification teams to embed manufacturability, compliance, and risk mitigation from concept to flight test readiness
  • Drive tooling strategies and fixture development for prototype builds, balancing the need for high precision with practical solutions suited to low-volume, rapidly evolving programs
  • Serve as the primary subject matter expert on the shop floor, leading root-cause analysis and implementing timely corrective actions to maintain schedule, quality, and structural integrity
  • Act as a key liaison with supply chain and regulatory bodies (FAA), ensuring materials, documentation, and processes align with certification objectives
  • Mentor and guide manufacturing engineers and technicians at all levels, setting best practices, championing innovative problem-solving, and fostering a hands-on culture of ownership and accountability
  • Fulltime
Read More
Arrow Right

Senior Manufacturing Engineer, Harnessing & Wiring

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , Santa Clara
Salary
Salary:
122880.00 - 166800.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering, Aerospace Engineering, Mechanical Engineering (or equivalent experience)
  • Minimum of 6+ years of experience in Harnessing & Wiring design, installation, and manufacturing within the aerospace industry
  • Experience in an environment tied to FAA-certified aircraft
  • Experience with production systems design and optimization, particularly in relation to wire harness installation in aircraft
  • Experience with thermoset carbon fiber prepreg materials and the integration of electrical components into composite structures
  • Proven experience working with external suppliers and contract manufacturers to support low-rate initial production and high-rate scaling
  • Excellent problem-solving skills with a strong ability to anticipate potential issues and develop effective solutions
  • Strong communication skills to collaborate with internal teams, external suppliers, and regulatory bodies
  • Detail-oriented with a focus on process documentation and compliance
Job Responsibility
Job Responsibility
  • Design Production Systems: Develop a comprehensive production system concept for the installation of wire harnesses in our aircraft assembly line, considering the use of supplier-fabricated structural assemblies
  • Collaborate with Suppliers: Coordinate with external suppliers to identify opportunities for pre-installing harness standoffs and supports and determine which harnesses, if any, should be pre-installed during the fabrication of structural assemblies
  • Process Optimization: Establish and document processes, guidelines, and standards to streamline the installation of wire harnesses, making the process faster, easier, and safer. Identify preferred installation components and methods
  • Damage Mitigation and Repair: Anticipate potential types of damage to wiring harnesses during production and develop mitigation strategies and repair procedures to ensure the integrity and safety of the installation
  • Adapt to High-Rate Production: Plan for production rate increases, analyzing how the production system will need to change to accommodate higher volumes over time
  • Support Certification Efforts: Create process documents, guidelines, and standards required to support the FAA certification efforts and maintain compliance with all regulatory requirements
  • Continuous Improvement: Identify and implement opportunities for continuous improvement within the EWIS production process to enhance quality, reduce costs, and increase efficiency
  • Fulltime
Read More
Arrow Right

Senior Manufacturing Process Engineer

Ready to join a team of visionaries who is dedicated to solving one of humankind...
Location
Location
Germany , Munich
Salary
Salary:
Not provided
climeworks.com Logo
Climeworks
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree in process engineering, manufacturing engineering, mechanical engineering, materials science, or similar
  • 5-10 years of experience in a manufacturing environment including significant experience with start-up phases and successful delivery of commercial products
  • Experience with continuous manufacturing lines including powder handling processes (HSE regulations and ATEX requirements)
  • Logic-driven, experienced with both process modeling approaches (heat and mass transfer, etc.) as well as structured risk-identification and problem-solving tools (e.g., process FMEA, 5 Whys, Fishbone)
  • Take initiative, are results-driven without missing important details, and are hands-on throughout the full development cycle—from lab to high-level evaluations
  • Collaborate easily across teams, communicate clearly, and enjoy leading both in-house and external projects
  • Fluent in English
  • At least B1-level proficiency in German
  • Knowledge of French is an advantage
  • Open to frequent travel (up to 60%, primarily between the Munich and Zurich areas)
Job Responsibility
Job Responsibility
  • Manufacturing process expert: Climeworks’ core expert in the process operation of novel manufacturing lines for sorbent filter production, during development, startup, and operation
  • Own all aspects of manufacturing process engineering to produce new sorbent filter material (working with manufacturing engineers and product owners): Understand process parameters & product impact
  • Evaluate and tune parameter ranges used in equipment purchases and in startup
  • Lead manufacturing process ramp-up, troubleshooting, and root cause analysis
  • Lead and own process FMEAs before, during, and after the startup phase
  • Ensure good documentation, training, and knowledge transfer
  • Cross-Functional Collaboration: Collaborate closely with internal experts in R&D, characterization/quality, product design, and sorbent/process development to ensure manufacturing process parameters lead to a guaranteed high-quality sorbent module product, and support the development of new testing methods
  • External partnerships & technical leadership: Act as a key technical expert in collaborations with external partners, ensuring DAC-specific requirements for sorbent filters manufacturing are met, including by being on-site to monitor operations when needed
  • Team player: Where needed, support lab-scale manufacturing in R&D, and new concept evaluation, for future-oriented DAC solutions
Read More
Arrow Right

Senior Mechanical Engineer: Test Development Engineering

As a Senior Mechanical Engineer in Test Development Engineering, you will play a...
Location
Location
United States , South Jordan, Utah
Salary
Salary:
Not provided
cricut.com Logo
Cricut
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering, Mechatronics, or a related field
  • 10+ years of experience in mechanical design, test and calibration equipment development, or precision metrology systems
  • Proficiency in CAD software (Creo, SolidWorks) and related engineering analysis tools (FEA, tolerance analysis)
  • Strong understanding of mechanical systems, pneumatic and electromechanical integration, and manufacturing processes
  • Deep knowledge of measurement science, tolerance analysis, and statistical methods for calibration and product qualification
  • Experience in test system design, metrology instrumentation, and mechanical calibration processes
  • Hands-on experience with mechanical test setups, data acquisition, and troubleshooting of measurement systems
  • Excellent analytical, problem-solving, and documentation skills
  • Strong communication skills and ability to lead cross-functional technical efforts
Job Responsibility
Job Responsibility
  • Conceptualize, design, and document assembly jigs, test fixtures, and precision metrology systems to support both production and validation testing
  • Develop custom calibration and test instruments, including mechanical, pneumatic, and electro-mechanical assemblies for high-accuracy measurements
  • Integrate sensors, load cells, displacement transducers, pressure gauges, and other instrumentation into test systems to support product calibration and verification
  • Collaborate with cross-functional teams (Design, Manufacturing, Quality, Calibration Labs, and Contract Manufacturers) to define test requirements and system capabilities
  • Utilize CAD software (Creo, SolidWorks) to create detailed 3D models and drawings of mechanical systems, with GD&T applied for precision alignment and repeatability
  • Generate and maintain Requirement Documents, Calibration Procedures, and Test System Specifications to ensure alignment between product and test design intent
  • Participate in supplier design reviews and qualification of external test and calibration equipment
  • Develop and validate test procedures, calibration methods, and verification plans for measurement systems and mechanical fixtures
  • Ensure measurement system analysis (MSA), gage R&R, and traceability to NIST or equivalent standards in all calibration processes
  • Conduct statistical evaluations of test data to assess system reliability, repeatability, and reproducibility
What we offer
What we offer
  • competitive Medical, Dental, and Vision coverage
  • 401(k) match
  • generous PTO
  • tuition reimbursement
  • yearly lifestyle stipend
  • exclusive employee discounts
  • Fulltime
Read More
Arrow Right

Mechanical Professional Engineer or Senior Mechanical Designer

Perform as a critical design team member in mechanical systems development and c...
Location
Location
United States , Phoenix
Salary
Salary:
Not provided
lswengineers.com Logo
LSW Engineers Arizona, Inc.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Registered PE in the State of Arizona or equivalent years of experience
  • Bachelor’s Degree from an ABET accredited engineering program (Architectural Engineering Degree preferred)
  • A minimum of 5 years’ experience in consulting engineering
  • Excellent skills designing mechanical/plumbing systems
  • Working knowledge of current versions of Revit and AutoCAD
  • Ability to apply logic, reasoning, and organizational skills to structure concepts & ideas into deliverables
  • Working knowledge of COMcheck, Excel, OneNote, Word, etc.
  • Excellent oral and written communication skills
  • Ability to work well within a team structure
  • Ability to learn & grow professionally
Job Responsibility
Job Responsibility
  • Apply strong technical design skills and knowledge to produce accurate and timely project deliverables
  • Support project requirements with client interface, field investigation, basis of design narratives, development of mechanical construction design documents that comply with all applicable codes and standards, review submittals, and support the project through construction completion
  • Design projects in Revit and AutoCAD for compliance with city, state, and national building codes, compliance with owner standards, and industry construction standards
  • Provide design information and effectively delegate work to production support staff as applicable
  • Provide a leadership role to share your knowledge with other design staff
  • Meet with and interact with clients and project stakeholders
  • Communicate with manufacturers and contractors to stay abreast of the latest trends and mechanical/plumbing systems technology
  • Coordinate and perform construction administration tasks internally & externally, enabling a successful project outcome
What we offer
What we offer
  • competitive wages
  • an employer funded profit sharing plan
  • 401k plan with employer safe-harbor contributions
  • an excellent work environment
  • the opportunity to expand and improve professional skills
Read More
Arrow Right

Senior Mechanical Engineer

The Mechanical Project Engineer will provide technical knowledge, guidance and s...
Location
Location
United Kingdom , Nationwide
Salary
Salary:
Not provided
nsgltd.com Logo
NSG Environmental Ltd
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Educated to degree level or equivalent in a technical discipline
  • Membership of appropriate technical/professional body
  • IOSH Managing Safely or formal H & S qualification - Relevant training will be provided if required
  • Understanding of the Project lifecycle and how projects are delivered within NSG
  • Basic understanding of the UK Nuclear Industry
  • Competent user of MS office
  • Ability to organise own work and effectively deliver under the guidance of a Project Manager
  • Ability to prepare and present reports, documentation and information in support of project delivery
  • Ability to interpret and evaluate technical data
  • Ability to communicate with a wide range of colleagues at all levels and with external stakeholders and contractors
Job Responsibility
Job Responsibility
  • Respond to client or colleague enquiries and take necessary actions to develop an effective engineering solution
  • Production of concept, scheme and detailed design documentation
  • Production of underpinning design calculations and analytical assessments
  • Production of engineering reports
  • Provision of relevant data, theory, formulae or standards to support design, manufacture, installation or equipment test
  • Self checking of all documentation prior to submitting for formal check and review
  • Liaise with internal and group company colleagues
  • Originate, prepare and deliver project documentation and engineering design deliverables
  • Provide technical oversight to sub-contract packages of work
  • Attend and contribute to engineering/project meetings
What we offer
What we offer
  • Life Assurance 3x Salary
  • Private Healthcare package
  • Pension – Company contributes 5% Individual contributes 4%
  • Discretionary bonus
  • 187.5 hours per year holiday allowance
  • Professional memberships covered
  • Training and development opportunities available
  • Fulltime
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy