Senior Engineer, Weld Manufacturing Job at Baxter (Batesville)

Senior Manufacturing Engineer I

You will be part of a critical team that ensures life-saving technology can be m...

Location

United States , Phoenix

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical, Manufacturing, or Industrial Engineering (or equivalent experience)
5+ years of experience in manufacturing engineering for high-volume or high-reliability products
Strong foundation in mechanical design and CAD modeling (SolidWorks preferred)
Practical, hands-on prototyping skills—familiarity with machining, 3D printing, assembly, and basic electronics integration
Deep understanding of materials and processes, especially polymers, metals, and joining methods
Applied knowledge of manufacturing principles (DFM, DFA, PFMEA, SPC, lean, six sigma)
Experience implementing or integrating MES, traceability, or digital manufacturing systems
Analytical mindset with experience using statistical tools or AI-assisted data analysis for problem-solving
Excellent communication skills with the ability to collaborate & influence across cross functional teams
Self-starter who thrives in a fast-paced, hands-on engineering environment

Job Responsibility

Develop and sustain manufacturing processes that meet cost, ergonomic, quality, and cycle time requirements for high-volume production
Collaborate closely with Product Design/R&D teams to influence manufacturability early in the product lifecycle
provide feedback on design-for-manufacturing (DFM), materials selection, and assembly tolerances
Design and implement production tooling, fixtures, and assembly methods using SolidWorks
Lead process characterization and optimization using DOE, SPC, and other data-driven methodologies
Evaluate and integrate manufacturing technologies including machining, molding, additive manufacturing, and joining methods (e.g., soldering, ultrasonic welding, mechanical fastening)
Drive implementation of traceability systems and MES integration to enhance process visibility and compliance
Partner cross-functionally with Quality, Product, and Automation Engineering to ensure robust and repeatable manufacturing outcomes
Identify and implement opportunities for cost reduction, quality improvement, and process efficiency, leveraging AI/data tools where appropriate
Provide hands-on technical support on the manufacturing floor, troubleshooting issues with equipment, materials, and processes

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs
snacks in our offices

Senior Engineer, Weld Manufacturing

The Senior Engineer, Weld Manufacturing at Baxter plays a critical role in impro...

Location

United States , Batesville, Indiana

Salary:

88000.00 - 121000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Engineering required
Over 2 years of job-related experience in manufacturing and weld engineering
Experience with Lean Manufacturing disciplines
Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
A strong mechanical and metallurgical background with a thorough knowledge of GMAW, GMAW-P, RSW, GTAW is preferred
Knowledge of welding processes, equipment and robotic applications
Ability to develop, lead and execute multiple projects, simultaneously and still meet desired results
Demonstrated leadership of capital / CI projects focused on meeting departmental goals
Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions

Job Responsibility

Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
Troubleshoot new or existing product problems involving designs, materials, or processes
Provide technical expertise or support related to manufacturing
Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
Perform nonconforming material analysis and create NCM reports
Work with Quality Control on reducing the NCMRs
Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
Ability to design and set up weld robot cells for maximum efficiency

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer
Medical and dental coverage that start on day one
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Employee Stock Purchase Plan (ESPP)
401(k) Retirement Savings Plan with options for employee contributions and company matching
Flexible Spending Accounts

Fulltime

Senior Mechanical Manufacturing Engineer

We are seeking a Mechanical Manufacturing Engineer to join our team in Mountain ...

Location

United States , Mountain View

Salary:

150000.00 - 190000.00 USD / Year

Kodiak Robotics

Expiration Date

Until further notice

Requirements

BS or equivalent experience in Mechanical Engineering
5+ years of experience developing assemblies for production and facilitating their construction at scale with contract manufacturers
Relevant processes include: mechanical assembly, CNC milling, sheet metal bending, welding, and wire harnesses fabrication
Experience with 3D mechanical CAD (SolidWorks preferred, CATIA, NX, etc)
Experience with PDM and PLM (Arena and ePDM preferred, Teamcenter, etc)
Strong problem-solving skills and comfort being hands-on at the manufacturing line

Job Responsibility

Advise team on design-for-assembly (DFA) and design-for-manufacturing (DFM) considerations
Assist in development of manufacturing bill of materials (MBOM)
Release design documents to manufacturing through PLM software (Arena)
Design mechanical systems in CAD software (SolidWorks)
Create content for work instructions, such as CAD graphics
Participate in first article inspections (FAI) and new product introduction builds (NPI) on assembly lines
Collect and document feedback from contract manufacturers and facilitate cross functional design improvements accordingly
Troubleshoot production and field quality issues, driving root cause and corrective actions
Collaborate with supply chain and manufacturing teams to revise designs with a focus on cost optimization

What we offer

Competitive compensation package including equity and biannual bonuses
Excellent Medical, Dental, and Vision plans through Kaiser Permanente, Anthem, and Guardian (including a medical plan with infertility benefits)
Flexible PTO and generous parental leave policies
Office perks: dog-friendly, free catered lunch, a fully stocked kitchen, and free EV charging
Long Term Disability, Short Term Disability, Life Insurance
Wellbeing Benefits - Headspace, One Medical, Gympass, Spring Health
Fidelity 401(k)
Commuter, FSA, Dependent Care FSA, HSA
Various incentive programs (referral bonuses, patent bonuses, etc.)

Fulltime

New

Qa/qc Coordinator

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

BSc degree or higher in Mechanical or Metallurgical Engineering from a recognized Engineering faculty
Valid CSWIP 3.2.1 or AWS Senior Welding Inspection Certificate (SCWI) with at least five years of post-certification experience
B Gas Grade 2 or NACE Level II Coating Inspector qualification is preferable
NDT Level II in RT, UT, PT & MT / NDT qualifications per ASNT or ISO requirements
Certified QMS Lead Auditor in accordance with ISO 9001:2015 with at least five years of auditing experience
Strong knowledge of international codes/standards: EN, ISO, API, ASME, ASTM
Good leadership and communication skills
Ability to work on projects in a complex, multicultural environment
Proficient in MS Office, database management, spreadsheets, and email communication
Minimum 15 years as QA/QC Coordinator or QA/QC Lead, leading multidiscipline QC inspector teams for inspection and testing activities on major oil and gas projects, including offshore process platforms, jackets, subsea pipelines, and all phases of manufacturing, fabrication, construction, and offshore installation

Job Responsibility

Report quality status daily to the Senior Quality Engineer
Supervise and coordinate all activities related to the Quality Management System during construction and installation phases
Ensure all works by contractors, subcontractors, vendors, manufacturers, service providers, and third-party inspectors comply with project specifications, corporate standards, international codes, and QA/QC requirements
Review technical and quality documents, ITPs, and QA/QC procedures in the document management system
Ensure approved QA/QC documents are implemented at worksite level, including quality plans, control procedures, ITPs, and inspection checklists
Lead and coordinate QC inspectors’ activities at fabrication sites, construction sites, and offshore installations
review inspection reports
Monitor contractor/vendor implementation of approved quality requirements and address deficiencies
Act as focal point for resolving shop/site-related quality control issues in consultation with senior quality management
Control and follow up on technical deviations, material substitutions, and changes to inspection/test requirements

New

Propulsion Technician Senior

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , El Segundo

Salary:

29.42 - 47.09 USD / Hour

Boeing

Expiration Date

May 29, 2026

Requirements

Minimum 4 years of relevant experience in propulsion assembly on high reliability products (preferably aerospace products)
Minimum 1 year experience of orbital tube welding
High School Diploma/GED
Ability to interpret drawing, schematics, harness wiring diagrams, internal and external specifications
Experience using inspection tooling (e.g. calipers, micrometers, DMM, depth gauges, etc.)
Demonstrates exceptional attention to detail
Ability to lift-up to 35 lbs
Experience with heater, thermistor installations
Experience with using various hand tools and power tools
Experience mixing epoxy materials

Job Responsibility

Weld, assemble, install, test, route/terminate/stake/wrap thermistors, heaters, non‐flight thermocouples and heaters on spacecraft assemblies by interpreting blueprints, engineering drawings and specifications, and written assembly, integration, and test procedures
Visually inspect propulsion assemblies to drawings, engineering specifications, and written assembly, and test procedure
Operate various materials handling equipment including forklifts, overheads cranes, aerial lift equipment, flight vehicle and sub-assembly transportation equipment, truck/tractor trailer combinations and other GSE as required
Travel maybe required to support operations identified by program being supported
Capable of operating a wide range of tools. Including but not limited to, orbital tube welding machines, tack welding machines, drill press, grinders, power and hand tools
Interface and /or works closely with Design and Manufacturing Engineering, Manufacturing, Materials, Procurement and Shipping personnel on procedural issuers involving design, methods, tooling, cost, and other areas involved in the control of product quality
Support in areas defined by Millennium Space System Leadership as business needs require
Crosstrain / mentor new hires
Other duties as assigned

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
Health insurance
Flexible spending accounts
Health savings accounts
Retirement savings plans
Life and disability insurance programs
Programs that provide for both paid and unpaid time away from work

Fulltime

Sr. Staff Mechanical Design Engineer

The Enphase Energy Storage and Systems Innovation team in the office of the CTO ...

Location

United States , Austin

Salary:

110000.00 - 167000.00 USD / Year

Enphase Energy

Expiration Date

Until further notice

Requirements

BS/MS/PhD Mechanical Engineering or closely related discipline
Minimum experience: BS and 5+ years / MS and 3+ years / PhD with mechanical design experience for a Senior Engineer
BS and 8+ years / MS and 6+ years / PhD and 3+ years mechanical design experience for a Staff Engineer
BS and 12+ years / MS and 8+ years / PhD and 5+ years mechanical design experience for a Sr. Staff Engineer
Significant experience in product and part mechanical design
Expertise leveraging various high volume manufacturing approaches such as sheet metal stamping, die casting, extrusion, forging, laser welding, CNC machining, thermoforming, silicone/rubber molding, injection molding, etc.
Proficiency with structural FEA and analyses for vibration, fatigue, and load bearing
Experience designing products for manufacturability and reliability
High proficiency with an enterprise CAD package (Solidworks preferred)
Outdoor product design experience for various ingress protection environments

Job Responsibility

Design high quality mechanical and electromechanical part and assembly designs efficiently and with good modeling practices
Produce 2D drawings and 3D CAD models, evaluate parts, and collaborate with a multi-disciplinary design team, suppliers, and contract manufacturing partners to develop product prototypes
Specify key functional and performance requirements
design and execute verification test plans
Perform mechanical analysis, structural FEA, vibration and shock analysis, FMEA, and design verification testing to inform designs and resolve issues and failures in prototype products
Research, analyze, implement, and test new materials and technologies to support innovative energy storage and system product designs
Complete documentation for design, testing, and analysis
Hands-on fabrication of electromechanical assemblies and prototypes
Work with a multi-disciplinary team to test and troubleshoot prototype designs
Mentor junior staff

What we offer

bonus
equity
benefits

Fulltime

New

Collections Specialist

We are looking for a skilled Collections Specialist to join our team on a contra...

Location

United States , Clayton

Salary:

Not provided

Robert Half

Expiration Date

Until further notice

Requirements

Demonstrated experience and understanding of the full order-to-cash lifecycle
1-5 years of experience working with progressive payment contractual agreements, including progress billing
Proficiency in Microsoft Office Suite, with advanced skills in Excel
Strong knowledge of credit and collections processes, particularly in a B2B environment
Expertise in billing and collection procedures
Excellent communication and organizational skills to manage multiple priorities
Ability to maintain professionalism while working with diverse internal and external stakeholders

Job Responsibility

Manage the collection process for progress billing and milestone invoices related to new equipment sales, including specialized services, freight, and upgrades
Attend weekly project status meetings with customers and internal teams to monitor milestones and payment statuses
Handle collections for non-project invoices as needed
Ensure accurate and timely creation of invoices throughout the project lifecycle, aligning with timelines, change orders, and shipment schedules
Provide regular feedback and reporting to accounts receivable leadership regarding payment trends, adjustments, and high-volume variances
Resolve issues related to failed or rejected invoices, guiding the credit and rebill process to completion
Respond to customer inquiries and provide requested documentation in a courteous and timely manner
Meet or exceed performance metrics established by the Billing Supervisor
Identify opportunities for process improvements and implement solutions
Collaborate effectively across divisions to support various billing and invoicing tasks

What we offer

medical, vision, dental, and life and disability insurance
eligible to enroll in our company 401(k) plan

New

Maintenance Team Leader

We are looking for an experienced Team Leader to join a well-established constru...

Location

United Kingdom , Romford

Salary:

32000.00 - 35000.00 GBP / Year

Office Angels

Expiration Date

Until further notice

Requirements

Previous experience within construction or property maintenance (ideally social housing)
Experience working with schedule of rates
Strong organisational skills and ability to manage multiple priorities
Excellent communication and leadership qualities
Proficiency in Microsoft Office, especially Excel
A proactive, problem-solving mindset with attention to detail

Job Responsibility

Lead and motivate a team of 5 Administrators to deliver high-quality service
Oversee scheduling and diary management for responsive and planned maintenance works
Ensure efficient allocation of jobs and resources using the in-house system
Monitor team performance and provide guidance, training, and support where needed
Manage material orders and stock control to keep projects on track
Maintain accurate records and update Excel spreadsheets for reporting purposes
Handle client communications via phone and email, ensuring timely responses
Oversee all administrative processes related to customer orders and repairs

What we offer

28 days of annual leave
Access to a pension scheme
Onsite parking
Friendly working environment with regular team lunches

Fulltime

Senior Engineer, Weld Manufacturing

Baxter

Location:
United States , Batesville

Category:
Manufacturing

Contract Type:
Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
March 20, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Senior Engineer, Weld Manufacturing

Senior Manufacturing Engineer I

Senior Engineer, Weld Manufacturing

Senior Mechanical Manufacturing Engineer

Qa/qc Coordinator

Propulsion Technician Senior

Sr. Staff Mechanical Design Engineer

Collections Specialist

Maintenance Team Leader

Senior Engineer, Weld Manufacturing

Baxter

Location:United States , Batesville

Category:Manufacturing

Contract Type:Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:March 20, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Senior Engineer, Weld Manufacturing

Senior Manufacturing Engineer I

Senior Engineer, Weld Manufacturing

Senior Mechanical Manufacturing Engineer

Qa/qc Coordinator

Propulsion Technician Senior

Sr. Staff Mechanical Design Engineer

Collections Specialist

Maintenance Team Leader

Location:
United States , Batesville

Category:
Manufacturing

Contract Type:
Employment contract

Job Posted:
March 20, 2025