Senior Electrical Harness Engineer Job at Kodiak Robotics (Mountain View)

Senior Electrical Hardware Engineer

Kodiak Robotics, Inc. was founded in 2018 and has become a leader in autonomous ...

Location

United States , Mountain View

Salary:

180000.00 - 225000.00 USD / Year

Kodiak Robotics

Expiration Date

Until further notice

Requirements

BS, MS, or equivalent experience in Electrical, Mechanical, or Computer Engineering
3+ years of hardware development experience, ideally within the automotive, aerospace or a related industry
3+ years of experience with PCBAs, Harnesses, Power Distribution Units, Power Supplies, and automotive subcomponents
Deep understanding of mixed analog and digital circuits
Experience with implementation and on-vehicle debugging of low level hardware buses such as I2C, CAN, SPI, UART
Experience with high speed hardware communication interfaces such as PCIe, GMSL/GMSL2, Ethernet
Hands on. You are just as comfortable getting your hands dirty analyzing a subsystem in the shop as when using a keyboard.
Great communicator. You have experience writing clear, concise, and detailed documentation
Passion. You are passionate about autonomous vehicles and their potential impact on humanity

Job Responsibility

Design circuits at the schematic level using a variety of capture tools
Design, influence, and collaborate with partners on power conditioning, regulation circuits and low frequency analog circuits to meet requirements
Design and test standard vehicle communication harnessing, CAN, LIN, Automotive Ethernet
Design and validate harnessing for low and high speed components
Validation testing for EMI/EMC at the whole truck level down to subcomponents
Collaborate with electrical and firmware engineering teams to validate circuits
Lead root cause analysis and resolve issues in electrical systems
Define stress test routines required to validate functional sections
Interface closely with other teams such as Software, Mechanical, Manufacturing, and with external component suppliers

What we offer

Competitive compensation package including equity and biannual bonuses
Excellent Medical, Dental, and Vision plans through Kaiser Permanente, Anthem, and Guardian (including a medical plan with infertility benefits)
Flexible PTO and generous parental leave policies
Office perks: dog-friendly, free catered lunch, a fully stocked kitchen, and free EV charging
Long Term Disability, Short Term Disability, Life Insurance
Wellbeing Benefits - Headspace, One Medical, Gympass, Spring Health
Fidelity 401(k)
Commuter, FSA, Dependent Care FSA, HSA
Various incentive programs (referral bonuses, patent bonuses, etc.)

Fulltime

Senior Electrical Engineer

We are seeking a Senior Electrical Engineer with a strong foundation in system-l...

Location

United States , Mountain View

Salary:

144000.00 - 153000.00 USD / Year

Cyngn

Expiration Date

Until further notice

Requirements

2-4 years of electrical engineering experience in production hardware development
Strong generalist background across multiple areas of electrical engineering (PCB, harness, system integration)
Proven expertise with PCB design, including schematic capture, layout, and DFM best practices
Experience with wiring harness design, particularly using Rapid Harness or similar tools
Familiarity with Arena PLM or equivalent systems for configuration and release management
Working knowledge of functional safety design principles and relevant standards (ISO-26262, IEC-60335)
Experience working with high-speed digital interfaces and multiple communication protocols
Familiarity with EMC/EMI compliance testing and design considerations
Strong communication and documentation skills
Ability to own designs end-to-end—from architecture through production release

Job Responsibility

Drive system-level electrical architecture, defining electrical needs, interface points, and integration strategies across subsystems
Design and deliver PCBAs, wiring harnesses, and complete system schematics from concept to production
Perform schematic capture, layout, and documentation using Altium Designer
Develop and document wiring harness designs using Rapid Harness, ensuring signal integrity, topology control, and manufacturability
Work with high-speed interfaces (>1 Gbps) and communication protocols, including I2C, I3C, I2S, GMSL, MIPI-CSI2, Ethernet, CAN, SPI, SSI, and various analog layers
Use structured risk management tools such as NUDD and FMEA to identify and mitigate design risks early
Define and execute Acceptance Test Plans (ATPs) for electrical validation, qualification, and production release
Apply best practices for battery-powered EV architectures, including EMC/EMI compliance and regulatory testing
Manage and release documentation through Arena PLM, ensuring configuration control and traceability
Translate system requirements into actionable design deliverables and manage schedule commitments

What we offer

Health benefits (Medical, Dental, Vision, HSA and FSA (Health & Dependent Daycare), Employee Assistance Program, 1:1 Health Concierge)
Life, Short-term and long-term disability insurance (Cyngn funds 100% of premiums)
Company 401(k)
Commuter Benefits
Flexible vacation policy
Sabbatical leave opportunity after 5 years with the company
Paid Parental Leave
Daily lunches for in-office employees and fully-stocked kitchen with snacks and beverages
Monthly meal and tech allowances for remote employees

Fulltime

Senior Manufacturing Engineer, Harnessing & Wiring

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , Santa Clara

Salary:

122880.00 - 166800.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, Aerospace Engineering, Mechanical Engineering (or equivalent experience)
Minimum of 6+ years of experience in Harnessing & Wiring design, installation, and manufacturing within the aerospace industry
Experience in an environment tied to FAA-certified aircraft
Experience with production systems design and optimization, particularly in relation to wire harness installation in aircraft
Experience with thermoset carbon fiber prepreg materials and the integration of electrical components into composite structures
Proven experience working with external suppliers and contract manufacturers to support low-rate initial production and high-rate scaling
Excellent problem-solving skills with a strong ability to anticipate potential issues and develop effective solutions
Strong communication skills to collaborate with internal teams, external suppliers, and regulatory bodies
Detail-oriented with a focus on process documentation and compliance

Job Responsibility

Design Production Systems: Develop a comprehensive production system concept for the installation of wire harnesses in our aircraft assembly line, considering the use of supplier-fabricated structural assemblies
Collaborate with Suppliers: Coordinate with external suppliers to identify opportunities for pre-installing harness standoffs and supports and determine which harnesses, if any, should be pre-installed during the fabrication of structural assemblies
Process Optimization: Establish and document processes, guidelines, and standards to streamline the installation of wire harnesses, making the process faster, easier, and safer. Identify preferred installation components and methods
Damage Mitigation and Repair: Anticipate potential types of damage to wiring harnesses during production and develop mitigation strategies and repair procedures to ensure the integrity and safety of the installation
Adapt to High-Rate Production: Plan for production rate increases, analyzing how the production system will need to change to accommodate higher volumes over time
Support Certification Efforts: Create process documents, guidelines, and standards required to support the FAA certification efforts and maintain compliance with all regulatory requirements
Continuous Improvement: Identify and implement opportunities for continuous improvement within the EWIS production process to enhance quality, reduce costs, and increase efficiency

Fulltime

Senior Professional, Engineering, Electrical Wiring Design

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

Canada , Mississauga

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration
Minimum of 10 years of relevant working experience in aerospace
Wiring design, wiring installation and/or wiring troubleshooting and electrical system integration knowledge
Strong sense of responsibility and good organization skills
Excellent communication skills including the ability to read/write in English
Good experience with CATIA V5 and CATIA V4 (CATWIRE module)
Experience with Capital (Mentor Graphics), PLM databases CDMA and Teamcenter an asset
Comfortable working with MS office suite

Job Responsibility

Review and approve Supplier technical engineering deliverables (ESSD/PCD) in part or in whole
Engage with electrical System stakeholders and manage workload scheduling
Provide technical engineering support on change management implementation (RFC, PCR)
Creation of wiring diagrams from System Definition Schematics (ESSD), preparation of Harness Reports with Harness Bill of Material (BOM) to meet customer configuration
Establish/improve measures to ensure/improve quality of engineering documents
Prepare work statements and reports (EDRN)
Checking of work prior to release and ensure compliance to various systems requirement
Select various components, connectors, backshells and other parts, involving researching parts catalogues, engineering specifications and contact with vendors if required
Be able to identify and manage engineering technical risks independently
Communicate lessons learned to other community members

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Senior Reliability Engineer - PCBA, Harness & Connectors

We are looking for a Senior Reliability Engineer in charge of developing and exe...

Location

United States , San Jose

Salary:

150000.00 - 225000.00 USD / Year

Figure

Expiration Date

Until further notice

Requirements

5+ years of experience in relevant reliability engineering areas
Bachelor's degree or higher in relevant science and engineering fields
Strong knowledge of environmental reliability test principles, models, and methodologies, such as high temperature high humidity, thermal cycle/shock, mechanical vibration/shock
Strong knowledge of industry test standards such as AECQ, JEDEC, IPC standards
Strong knowledge of electrical circuits, PCBA design and relevant SW tools (e.g. Altium)
Strong knowledge of PCBA, harness and connector failure modes, mechanisms, and FA techniques
Hands-on experience on field reliability risk analysis and failure prediction methods
Hands-on experience with Weibull++, JMP, or other reliability statistical analysis software
Hands-on experience on electronic circuit debug and relevant tools, e.g. source meter, oscilloscope
Hands-on experience with 3D CAD tool (e.g. CATIA)

Job Responsibility

Work with cross-functional teams, own hardware reliability requirements and validation strategy
Develop and execute accelerated life tests for PCBAs, electronic components, electrical harness and connectors
Lead DFMEA efforts with design engineers to assess design risks, impacts, controls, and corrective actions
Design reliability test flows and procedures, communicate with internal and external/CM teams to execute tests and report results
Work with test engineers to design setup and fixtures used in reliability testing
Guide and support PCBA, harness, connector failure analysis, design of experiments (DOEs) and corrective action processes with cross-functional teams
Analyze field data, assess field risks, and design tests that correlate to field usage conditions

Fulltime

Senior Mechanical Engineer

This is a high-impact, technically demanding position where you will drive the d...

Location

United States , Mountain View

Salary:

144000.00 - 153900.00 USD / Year

Cyngn

Expiration Date

Until further notice

Requirements

4~8 years of experience in mechanical engineering, ideally in robotics, automotive, or other complex electromechanical systems
Proven record of taking products from concept through mass production
Strong proficiency with SolidWorks and 3D CAD modeling best practices
Understanding of GD&T and tolerance stack-ups for precision assemblies
Experience with PLM systems (Arena or similar)
Hands-on prototyping and test experience — comfortable assembling and debugging systems in a lab
Analysis skills for simple FMEA & Thermal simulations
Ability to collaborate across disciplines
Excellent problem-solving skills, with a data-driven approach to design decisions

Job Responsibility

Own the mechanical technical specification, design, integration, and release for vehicle systems
Create CAD models, detailed drawings, and specifications for parts and assemblies (SolidWorks)
Drive product development cycles from concept to production, ensuring manufacturability and reliability
Troubleshoot issues, identify root causes, and design corrective/preventative solutions
Build, assemble, and operate test fixtures for mechanisms — including necessary coding & electrical setups
Characterize sensing systems (encoders, sensors) for bandwidth, latency, and other system parameters to support closed-loop motor control
Develop and execute test plans, analyze results, and drive design improvements based on data
Work closely with electrical, software, and external engineering partners to meet system-level goals for safety, performance, and cost
Serve as design release engineer for systems such as Electronics enclosures, harnesses, and sheet metal assemblies
Own subsystem Bills of Materials (BOM), assembly structures, and documentation within PLM systems (Arena)

What we offer

Health benefits (Medical, Dental, Vision, HSA and FSA (Health & Dependent Daycare), Employee Assistance Program, 1:1 Health Concierge)
Life, Short-term and long-term disability insurance (Cyngn funds 100% of premiums)
Company 401(k)
Commuter Benefits
Flexible vacation policy
Sabbatical leave opportunity after 5 years with the company
Paid Parental Leave
Daily lunches for in-office employees and fully-stocked kitchen with snacks and beverages
Monthly meal and tech allowances for remote employees

Fulltime

CATIA DMU Senior Software Engineer

Senior Software Engineer role focused on CATIA DMU activities for Airbus aircraf...

Location

India , Bengaluru

Salary:

Not provided

Sopra Steria

Expiration Date

Until further notice

Requirements

B Tech or BE degree
Minimum 2+ years of experience in AIRBUS Process, Methods and Tools
Hands on experience in CATIA V5/V6, PASS SSI, Enovia VPM, TreND, Context Builder, CADint, Taksy, Gilda, DPDS and Optegra
Sound knowledge in AIRBUS product structure and Configuration management process
Good technical knowledge of Aircraft Structures, Systems, Cabin & Cargo Layouts
Experience in Design and Quality check of AIRBUS Structural, Systems and Cabin/Interior components
Basic knowledge in Agile / SAFe methodologies
Ability to work with cross-functional teams
Very good communication and interpersonal skills

Job Responsibility

Working for aircraft like A350, A321 and A380 on GRM activities ATA 92 and FTI activities ATA 89
Select electrical harness protections like EMI, Electrical, Mechanical
Work on both retrofit and line fit solutions
Creation of product structure (ATA 92,89)
Experience with aircraft environment, mechanical and electrical structures harness design
Expertise in Catia V5 and knowledge in 3D part design and 2D drawing creation, Assembly Design, Harness wiring
Perform DMU(Digital Mock-up) Integration, design and drawing activities using AIRBUS methodologies
Support AIRBUS projects in DMU/M&T/CM bundles
Accountable for activity execution and closing of assigned responsibilities
Capture best practices, build knowledge repository & training materials

Fulltime

Senior Software Quality Engineer

The Software Quality Engineer will contribute to software development for Portal...

Location

United States , Cambridge

Salary:

Not provided

Portal Instruments

Expiration Date

Until further notice

Requirements

Minimum 3 years of experience in developing medical device software requirements and tests for software validation
Experience with Software Automation – can read and understand scripting and programs written using Bash and/or Python
Foundation in computer science principles including familiarity with data structures, algorithms, and software design
Familiarity with SW development in languages including C and C++11. Experience in languages like Python is preferred
Experience working with embedded devices, preferably in a medical device environment
Ability to multitask and manage competing priorities
Strong oral and written communication skills

Job Responsibility

Drive Portal’s software V&V efforts throughout the development lifecycle:generate and maintain requirements, implement and execute tests, maintain documentation packages
Work cross-functionally with the V&V team and Software engineering team to outline software and firmware requirements and ensure compliance to applicable standards
Assess and maintain test coverage and acceptance criteria using a risk-based approach in accordance with ISO 14971 and IEC 62304
Develop and review front-end software tests and tools for use in validation of software requirements
Ensure software verification activities are documented in accordance with Portal's quality management system
Manage qualification and validation of software packages used by Portal
Support electrical and mechanical compliance testing through the development of software driven test harnesses
Lead the software risk management process using FMEA and other risk management techniques
Evaluate system performance by designing, executing, and documenting verification and validation plans

What we offer

Stock options
Roth and traditional 401(k) retirement plans
Health and dental plans
PPO and HMO healthcare plans
Dental, orthodontic, vision and accident insurance plans
Paid family medical leave
Short- and long-term disability
AD&D insurance
Flexible spending accounts (FSA)
20 days of vacation

Fulltime

Senior Electrical Harness Engineer

Kodiak Robotics

Location:
United States , Mountain View

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
December 09, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Senior Electrical Harness Engineer

Senior Electrical Hardware Engineer

Senior Electrical Engineer

Senior Manufacturing Engineer, Harnessing & Wiring

Senior Professional, Engineering, Electrical Wiring Design

Senior Reliability Engineer - PCBA, Harness & Connectors

Senior Mechanical Engineer

CATIA DMU Senior Software Engineer

Senior Software Quality Engineer

Senior Electrical Harness Engineer

Kodiak Robotics

Location:United States , Mountain View

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:December 09, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Senior Electrical Harness Engineer

Senior Electrical Hardware Engineer

Senior Electrical Engineer

Senior Manufacturing Engineer, Harnessing & Wiring

Senior Professional, Engineering, Electrical Wiring Design

Senior Reliability Engineer - PCBA, Harness & Connectors

Senior Mechanical Engineer

CATIA DMU Senior Software Engineer

Senior Software Quality Engineer

Location:
United States , Mountain View

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
December 09, 2025