Sealer Job at Boeing (Wichita)

Substitute Production Assistant

The BVSD Culinary Center Production Assistant works closely under the supervisio...

Location

United States , Boulder

Salary:

20.27 USD / Hour

Boulder Valley School District

Expiration Date

June 30, 2026

Requirements

Communicate (read, write, and speak) in English
Completed and submitted BVSD online application
Must pass FS Online Training Assessment by completion of probationary period
Offer contingent upon passing post offer physical
Must be able to perform tasks on computers and peripherals
Must pass Math Test upon entry
Must have working knowledge of commercial large scale kitchen equipment, such as slicers, shredders, ovens, mixers, cook/chill machines, chillers, blast chillers, vacuum sealers, and commercial dishwashers
Ability to operate equipment such as hand trucks and pallet jacks
Ability to lift 50 lbs. on a frequent basis

Job Responsibility

Understands and is able to communicate the goals and philosophy of the BVSD Food Services Program
Washes, peels, cuts, or shreds ingredients, utilizing high volume bulk production equipment as required for the task
Measures, weighs, prepares, assembles ingredients and cooks according to the planned menu and prescribed standardized recipes
Participates in the proper receiving, storage and inventorying of food, paper, chemicals and supplies according to the BVSD Food Service Department Standard Operating Procedures
Maintains organized storage of all pans, utensils, storage containers and other small-wares and equipment used in the central production facility
Assists with Catering as needed and assigned. Unique menu needs, preparation of food with focus on quality, presentation and appearance
Ensures the freshness of all prepared items by implementing proper rotation of food items prepared, properly wrapping and labeling prepared food items, and preparing only the amounts of food items as assigned
Participates and maintains the cleanliness and sanitation of all kitchen, café and storage areas under the auspices of BVSDCC including, but not limited to, walk-ins, refrigeration, freezers, and dry storage areas
Monitors and records continuous electronic temperature monitoring (and secondary manual recording) on all cook/chill equipment per the HACCP + Food Safety guidelines
Uses, assembles and disassembles, cleans, and maintains institutional food service equipment such as slicers, shredders, ovens, mixers, Sous Vide Equipment, Cook/Chill, 200 Gallon Commercial Kettles, Grinders, Graters, Choppers, Baggers, Vacuum Seal Equipment, and commercial ware-washers

What we offer

Free high-quality Health and Dental Coverage
Vision Coverage
Supplemental Life Insurance
Employee Assistance Program
Aflac
Identity Theft Protection
Flexible Spending Plans
Retirement Savings Plans
EcoPass

Parttime

Metal Fab - Hand Form Specialist

This role is at Spirit AeroSystems, Inc. a wholly owned subsidiary of The Boeing...

Location

United States , Wichita

Salary:

23.66 - 39.32 USD / Hour

Boeing

Expiration Date

Until further notice

Requirements

All applicants must be willing and able to work any shift, including alternative work weeks
All Candidates must pass the WorkKeys Assessment (workkeys.com) or provide verification that they have passed the WorkKeys Assessment
Must be a U.S. Person as defined by 22 C.F.R. §120.15 (U.S. Citizen, lawful permanent resident, refugee, or asylee) to meet export control compliance requirements

Job Responsibility

Fabricate components using associated tasks including deburr, bending, routing, forming, cutting, shearing, straightening, shrinking, bead, flare, flange, punching, countersinking, tapping, chamfering, pressure and leak test, part mark or similar tasks
Use hand, power tools & equipment to complete work assignment
Validate quality of tool(s) prior to setup, during & after job completion
Apply potting compound and sealer as required to complete the job
Work from blueprints, drawings, templates, and check fixtures, form blocks and written/verbal instructions
Self inspection as required of performed task prior to next work sequence. Uses precision measuring equipment (calipers, scales, etc.)
Rework and repair defective products as required
Assist others in the execution of tasks as required
As required layout parts and patterns to facilitate associated operations (shear, route, saw, etc.)
Setup, adjust, maintain and operate all equipment

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
May be eligible for a $5,000 state of Kansas Aviation tax credit for up to five years

Fulltime

New

Packaging Machine Operator

The Packaging Machine Operator, under the general supervision, is responsible fo...

Location

United States , Charlotte

Salary:

21.40 USD / Hour

THE VAIL CORPORATION

Expiration Date

Until further notice

Requirements

High School Diploma or GED and/or 1-year production experience in a manufacturing environment required
Lock/out tag/out certified or become certified within three months
Must be able to comply with the physical demands of constantly lifting and moving stock by hand or with manual equipment
Ability to lift 40+ lbs. on a regular basis, and occasionally be able to lift/move more than 50+ lbs. with mechanical or peer assistance
Candidate must be comfortable communicating to team members and management staff
Candidate will be trained and must be able to perform all job functions within the department at any given time
Prerequisite: Complete training and any applicable examinations

Job Responsibility

Maintains shift documentation (i.e., Metal Detector and Batch Order Verifications)
Reads production schedule and plans accordingly
Reads and interprets schedule in MicroStrategy
Able to print labels on different printers, choosing correct program for each printer
move eye and clean printers
Perform nitrogen testing
Efficiently maintains the operation of packaging machinery by monitoring codes, dates and prices
Maintains an adequate supply of roll stock and ensures all packaging materials are available for each machine
Set up and write new programs for bag makers
Writes and/or edits machine micro logic as needed to maintain an efficient and low waste operation

What we offer

competitive health, dental, 401k and wellness benefits beginning on the first day of employment

Fulltime

New

Packaging Machine Operator

The Packaging Machine Operator, under the general supervision, is responsible fo...

Location

United States , Charlotte

Salary:

19.45 USD / Hour

THE VAIL CORPORATION

Expiration Date

Until further notice

Requirements

High School Diploma or GED and/or 1-year production experience in a manufacturing environment required
Lock/out tag/out certified or become certified within three months
Must be able to comply with the physical demands of constantly lifting and moving stock by hand or with manual equipment (including pallet jacks and forklifts)
Ability to lift 40+ lbs. on a regular basis, and occasionally be able to lift/move more than 50+ lbs. with mechanical or peer assistance

Job Responsibility

Maintains shift documentation (i.e., Metal Detector and Batch Order Verifications)
Reads production schedule and plans accordingly
Reads and interprets schedule in MicroStrategy
Able to print labels on different printers, choosing correct program for each printer
move eye and clean printers
Perform nitrogen testing
Efficiently maintains the operation of packaging machinery by monitoring codes, dates and prices
Maintains an adequate supply of roll stock and ensures all packaging materials are available for each machine
Set up and write new programs for bag makers
Writes and/or edits machine micro logic as needed to maintain an efficient and low waste operation

What we offer

competitive health, dental, 401k and wellness benefits beginning on the first day of employment

Fulltime

New

Sterile Processing Technician

Sterile Processing Technician for Surgery Center. Part-time, Dayshift, Monday - ...

Location

United States , Wauwatosa

Salary:

20.80 - 31.20 USD / Hour

Advocate Health Care

Expiration Date

Until further notice

Requirements

High School Graduate
Good interpersonal communication skills
Must be able to stand, walk, squat, bend, twist, and reach above shoulders on a daily basis
Must be able to lift up to 15 lbs. from floor to overhead
Must be able to lift up to 50 lbs from floor to waist
Must be able to lift and carry up to 50 lbs. at waist height a reasonable distance
Must be able to push/pull with 20 lbs. of force
Position requires repetitive use of feet (i.e., heat sealer, sonic cleaner)
Must have functional speech, vision, touch, and hearing

Job Responsibility

Processes all reusable medical/surgical items for issue according to departmental and infection control policy and procedures
Sterilizes instruments and equipment according to manufacturer's recommendations and infection control guidelines
Completes thorough cleaning of surgical instruments and equipment
Processes patient care equipment for re-issue
Inspects patient care equipment for cleanliness and proper functioning
Inspects surgical instruments and equipment for proper functioning
Performs biological indicator tests on the Steam sterilizers and the Sterrad Unit and Steris One
Assembles instrument sets according to department protocols
Packages instrument sets for sterilizing
Distributes sterile equipment to appropriate areas

What we offer

Paid Time Off programs
Health and welfare benefits such as medical, dental, vision, life, and Short- and Long-Term Disability
Flexible Spending Accounts for eligible health care and dependent care expenses
Family benefits such as adoption assistance and paid parental leave
Defined contribution retirement plans with employer match and other financial wellness programs
Educational Assistance Program
Opportunity for annual increases based on performance

Parttime

New

Defense - Sheet Metal Mechanic

This role is at Spirit AeroSystems, Inc., a wholly owned subsidiary of The Boein...

Location

United States , Wichita

Salary:

23.66 - 39.32 USD / Hour

Boeing

Expiration Date

Until further notice

Requirements

Must be able to obtain and maintain a DoD security clearance
All applicants must possess at least 6 months of experience or skills that would be transferrable to the position
All applicants must possess the willingness to work assigned shift and overtime as required as well as the ability to work on concrete floors, uneven surfaces, and in confined spaces, as well as walk on open floor beams, climb on stairs/scaffolding, crawl/kneel in workstation, and lift/move parts and/or tools
All applicants must be willing and able to be flexible and work 1st or 2nd shift, including alternative work weeks. Majority of new hires will be hired for 2nd shift
All Candidates must pass the WorkKeys Assessment (workkeys.com) or provide verification that they have passed the WorkKeys Assessment.

Job Responsibility

Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components
Obtain required information from prints, charts, sketches, work instructions, documents, verbal and electronic information
Use shop mathematics and precision measuring and or test instruments to complete work assignments and functional test assemblies and components
Utilize tooling in the assembly of components into sub-assemblies or end items
Verify work performed is per work instructions and meets process and/or engineering specification. Identify discrepancies found per applicable procedure
Ensure equipment and tool certification occurs per procedure
Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties)
Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required, and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building
Perform work within allotted schedules
Support the continuous flow of product within the manufacturing process by training and assisting employees at all classification levels

What we offer

competitive base pay and variable compensation opportunities
health insurance
flexible spending accounts
health savings accounts
retirement savings plans
life and disability insurance programs
programs that provide for both paid and unpaid time away from work
Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits

Fulltime

New

Packing Operator

This is where my hands make life-sustaining products. You are driven by the know...

Location

Canada , Alliston

Salary:

27.90 CAD / Hour

Baxter

Expiration Date

Until further notice

Requirements

Successful completion of High School diploma or GED required
Experience doing repetitive tasks
Manufacturing/Quality experience in a GMP environment
Experience in food or manufacturing industry
Previous experience working in a fast-paced environment (experience working in an assembly line setting is preferred)
Flexibility to weekends
Positive attitude, and an ability to work in a team setting with a focus on quality assurance and attention to detail

Job Responsibility

Set up case sealer
Ensure Machines are operating properly
Move sterilized trucks from sterilized staging area to packing staging area
Remove screens from trucks
Unload sterilized products onto conveyor
Inspect and pack the viaflex units
Remove empty trucks to staging area and remove garbage from area
Learn, understand and apply thorough quality standards, Standard Operating Procedures (SOPs) and Current Good Manufacturing Practices (cGMP)
Notify the supervisor and take appropriate action if any safety, quality, mechanical or discrepancy issues occur
Sustain a clean and safe work area using 6S principles

Fulltime

New

Manufacturing Operator

Argenta is currently looking to fill the role 3rd Shift Manufacturing Operator a...

Location

United States , Shawnee

Salary:

Not provided

Argenta

Expiration Date

Until further notice

Requirements

Good written and verbal communication skills in English
Good PC Skills, including use of e-mail, attaching documents to e-mail
Previous experience using electronic databases and on-line system applications
Demonstrated ability to work safely in a production environment required
Demonstrated ability to read/interpret/follow instructions regarding workplace documentation, such as SOP’s, Operator Manuals, Work Instructions, etc.
Demonstrated technical ability as measured by good troubleshooting skills
Must be able to demonstrate a good mathematical aptitude in addition, subtraction, multiplication, division, & metric system
Experience in a government regulated, Good Manufacturing Practices (GMP) or standard operating procedures (SOP) environment preferred
Must be willing to work overtime as required, based on production demands
Experience with filtration, steam in place and fermentation preferred

Job Responsibility

Comply with all workplace standards and safety procedures, including Lockout Tagout, Current Good Manufacturing Practices (cGMPs), Occupational Safety and Health Administration requirements (OSHA), Standard Operating Procedures (SOPs), and Company Guidelines
Perform the daily setup and routine operation of the packaging line, including but not limited to: bottle in-feed, unscrambler, filler, bottle capper, torquer, labeler, vision systems, weighing systems, bar coding systems, sealers, disassembly/assembly, cleaning, resolving equipment stoppages and jams, and all material handling as trained
Inspect packaging components, in-process items, and packaged drug products to assure compliance to specifications, identify any non-conforming item and initiate appropriate actions
Palletize both finished and unfinished products and operate non-motorized material handling equipment
Complete, maintain, and update production documentation (both electronic and paper) to perform material movements, material take-outs and yield determinations by following SOPs and utilizing systems as required such as Systems/Applications/Products (SAP), Manufacturing Execution Systems (MES), Electronic Batch Records (EBRs), etc.
Take ownership of training and learning to develop high performance competencies such as technical skills, communication skills, and skills to build a team-oriented, customer focused, and collaborative culture
Meet the production schedules outlined by line lead and/or Supervision. Review and approve work output for team members by using validated methods
Perform preventive maintenance tasks as needed and trained
Manage area cleaning requirements including facility, equipment, and Operational Excellence initiatives

Fulltime

Sealer

Boeing

Location:
United States , Wichita

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
January 03, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Sealer

Substitute Production Assistant

Metal Fab - Hand Form Specialist

Packaging Machine Operator

Packaging Machine Operator

Sterile Processing Technician

Defense - Sheet Metal Mechanic

Packing Operator

Manufacturing Operator

Sealer

Boeing

Location:United States , Wichita

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:January 03, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Sealer

Substitute Production Assistant

Metal Fab - Hand Form Specialist

Packaging Machine Operator

Packaging Machine Operator

Sterile Processing Technician

Defense - Sheet Metal Mechanic

Packing Operator

Manufacturing Operator

Location:
United States , Wichita

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
January 03, 2026