Quality Engineering Technician, Metrology Job at Figure (San Jose)

Metrology Technician

Ensure all mechanical and electromechanical parts meet the highest standards of ...

Location

United States , Hayward

Salary:

35.00 - 65.00 USD / Hour

1X Technologies

Expiration Date

Until further notice

Requirements

5+ years of experience in quality inspection, control, or manufacturing
Strong understanding of GD&T and engineering drawings
Skilled with measurement tools and quality documentation (FAI, PPAP, Gage R&R)
Strong problem-solving and data analysis skills
Excellent attention to detail, organization, and communication
Experience training others in inspection and quality techniques

Job Responsibility

Inspect incoming, in-process, and final parts using precision tools (calipers, micrometers, gauges, CMM)
Interpret engineering drawings and apply GD&T standards
Define and improve inspection workflows, documentation, and criteria
Decide part acceptance or rejection
work with engineering and production to resolve issues
Maintain calibrated inspection equipment and organized work areas
Document inspection results, metrology data, and quality reports
Train and mentor team members on inspection methods and standards

What we offer

Health, dental, and vision insurance
401(k) with company match
Paid time off and holidays

Fulltime

Prototype Build Technician

This is a hands-on, detail-driven role working on the strip, build, inspection a...

Location

United Kingdom , Southam

Salary:

17.00 GBP / Hour

SYNTECH RECRUITMENT LTD

Expiration Date

Until further notice

Requirements

Hands-on prototype build experience and/or direct experience with transmission systems
Proven background assembling, stripping or validating complex mechanical assemblies
Strong capability to read, interpret and work accurately to engineering drawings and tolerances
Ability to verify quality using precise measurement techniques (manual metrology or CMM advantageous)
Experience modifying or fabricating prototype hardware (e.g., machining, drilling, grinding, welding)

Job Responsibility

Strip, build, assemble and inspect prototype transmissions in line with build manuals and engineering instruction
Investigate and fault-find build issues, manufacturing defects and mechanical failures
Strip and assess unfamiliar or one-off transmission assemblies without existing build documentation
Apply a deep understanding of transmission architecture, component function and driveline systems
Install instrumentation, sensors and bespoke modifications on test units as directed by engineering
Identify, raise and report build concerns
support engineering with structured problem-solving (including 8D)
Follow all part-picking, kitting, storage and inventory processes
Maintain a safe, well-organised, prototype-standard workshop environment

Fulltime

Process/Assembly Technician

We are proud to be working alongside a truly ground-breaking medical device busi...

Location

United Kingdom , Oxford

Salary:

14.00 - 14.25 GBP / Hour

PLANET RECRUITMENT SERVICES LTD

Expiration Date

Until further notice

Requirements

Experience within a production/assembly role
Experience within a quality inspection role

Job Responsibility

Operate precision manufacturing equipment
Perform incoming QC (Quality Control) inspection of engineered components
Work with cross-functional teams to support laboratory requirements and practice
Proactively work with the Process Engineering team to review process documentation, and suggest areas of process improvement
Follow process controls, in-line monitoring, IPQC, and metrology for QA to ensure that product and process quality specifications are met
Maintain equipment and batch logbooks for production
Understand and follow Health, Safety, and Environmental policies
Execute experimental protocols to qualify or validate production batches or new equipment

Fulltime

Material Testing and Calibration Technician

The Material Testing and Calibration Technician is responsible for ensuring the ...

Location

Canada , Fort Erie

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

5-7 years of experience or a degree in a technical field in Metrology and / or Material testing or equivalent industry approved certifications
A minimum of 5-7 years of hands-on experience in a material testing role within a manufacturing environment
Current certification or Airbus Helicopters approvals in Material Testing is a highly desired asset
Experience in the aerospace or a similarly highly-regulated industry is highly desirable
Specific experience with composite manufacturing processes is a significant advantage
Strong understanding of calibration principles, measurement uncertainty, and traceability
Demonstrated ability to perform hands-on calibration of various equipment and instruments
Material Testing to Airbus Helicopters requirements
Proven ability to read and interpret complex engineering drawings, blueprints, and technical specifications
Basic knowledge of composite and metallic materials and their properties

Job Responsibility

Perform scheduled and unscheduled calibrations on major on-site equipment
Identify, troubleshoot, and report equipment non-conformities
Document and maintain detailed calibration and inspection records
Execute calibration of measurement instruments
Management of the calibration spreadsheet
Conducting material tests on incoming Inspection material
Generating test reports and releasing material or issuing NC’s
Preparing samples for testing
Conduct re-life tests to support Production needs
Conduct In Process Floating Peel Tests

Fulltime

Calibration Technician

Execution through completion, assigned projects designed to ensure continuous pr...

Location

United States , Buffalo Grove, Illinois

Salary:

25.00 - 35.00 USD / Hour

Nemera

Expiration Date

Until further notice

Requirements

Two (2) year college in related field or minimum three (3) years in related technology
Minimum three (3) years of experience in Equipment Calibration
Experience in use of basic measuring instruments (calipers, micrometers, optical comparator, and microscope)
Experience in use of Optical Gauging Product Optical Machine and CMM
Ability to read and interpret Blueprints

Job Responsibility

Supports and maintains all policies of the company including but not limited to ISO Standards, Health and Safety Requirements, Continuous Improvement as well as standard work procedures
Performs in-house inspection equipment calibration such as calipers, micrometers, indicators, pin gages, ring gages, as well as custom made gages and fixtures
Maintains weekly accuracy verification of equipment Optical Gauging Product Optical Machine and CMM
Performs maintenance, cleaning and minor repair of equipment and fixtures
Audits equipment and fixtures performance
Communicates with calibration vendors to schedule calibration service, equipment repair and maintenance
Orders and receives new equipment purchased for quality
Manages and maintains the files of equipment manuals, equipment qualification documents, calibration certificates, drawings of gages and fixtures
Manages and maintains the calibration data base inventory for scheduling in-house calibration of equipment as well as outside source calibration events
Performs annual metrology equipment inventory and generates report

Fulltime

Senior Electrical Test Technician

Join a purpose-driven team dedicated to reducing the carbon footprint across mul...

Location

United States , Burlington

Salary:

Not provided

Nondestructive & Visual Inspection

Expiration Date

Until further notice

Requirements

Associate’s degree in engineering technology preferred not required
5+ years of experience as Test Technician performing circuit analysis, troubleshooting, and repairs
Understanding of the principles of heat transfer, refrigeration cooling and heating applications a +
IPC-A- 610, A-620 and J-STD-001 training preferred
Experience using electrical test equipment and electronic component failure analysis
Ability to work on several analyses concurrently
Excellent computer skills, familiar with networking, MS Office applications
Hands-on experience in a workshop setting, including manufacturing, assembly, and prototyping
Knowledge of 3 phase, single phase, DC power circuits, and control logic
Ability to read schematics, ladder diagrams, and wire run lists

Job Responsibility

Learn and operate the available test equipment such as DMM, PQA, Oscilloscope, etc.
Ensure tasks are performed on time, safely, and in a professional manner
Participate and collaborate with engineers in other disciplines
Train technicians and oversee testing of Chillers
Establish and perform quality control inspection points for STX and DTX
Perform Electrical Check out on all products
Create or revise production documentation, develop test procedures and work instructions
Oversee calibration program work with Metrology company collecting tools and schedule pick ups
Analyze, troubleshoot repair electrical issues wiring, harnesses, PC boards control systems
Identify chances to improve efficiency, reliability quality in assembly, manufacturing processes

Final Inspection Technician

As a Final Inspection Technician you will perform visual inspections and conduct...

Location

United States , Batesville

Salary:

43200.00 - 54000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma/GED minimum educational requirement
2 years technical experience or equivalent combination of education/work experience in a specific technical field
Work requires substantial judgment and analytic ability requiring somewhat complex calculations, organizing information for reports, and solving minor problems
Good organizational skills and basic math skills
Knowledge of basic wiring metrology methods, and ability to read blueprints
Proficient with Microsoft products such as MS Office, MS Excel and MS Powerpoint
Must be flexible to support team and be able to work 1st or 2nd shift
Applicants must be authorized to work for an employer in the U.S.

Job Responsibility

Perform visual inspections and conduct various functionality tests on all parts, assemblies, and products
Conduct final inspection of completed product
Ensure all parts, components and sub-assemblies print is accurate based on the latest revision
Give presentations to visitors as the need arises
Maintain production inspection reports in a timely manner
Analyze returned products for cause of failure and assist in repair of defective products
Work with line support workers to address material non conformances
Participate in lean manufacturing projects for improvement in quality, cost, and delivery
Monitor inventory levels of DVM parts to prevent shut down of production
Perform First Article Inspections (FM's) to ensure that MI fabricated and purchased parts meet tolerances

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Flexible Spending Accounts
educational assistance programs
family and medical leaves of absence

Fulltime

New

Final Inspection Technician

As a Final Inspection Technician you will perform visual inspections and conduct...

Location

United States , Batesville

Salary:

43200.00 - 54000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma/GED minimum educational requirement
Associate Degree in a Technical subject area preferred
2 years technical experience or equivalent combination of education/work experience in a specific technical field
Work requires substantial judgment and analytic ability requiring somewhat complex calculations, organizing information for reports, and solving minor problems
Good organizational skills and basic math skills
Knowledge of basic wiring metrology methods, and ability to read blueprints
Proficient with Microsoft products such as MS Office, MS Excel and MS Powerpoint
Must be flexible to support team and be able to work 1st or 2nd shift
Applicants must be authorized to work for an employer in the U.S.

Job Responsibility

Perform visual inspections and conduct various functionality tests on all parts, assemblies, and products
Conduct final inspection of completed product
Ensure all parts, components and sub-assemblies print is accurate based on the latest revision
Give presentations to visitors as the need arises
Maintain production inspection reports in a timely manner
Analyze returned products for cause of failure and assist in repair of defective products
Work with line support workers to address material non conformances
Participate in lean manufacturing projects for improvement in quality, cost, and delivery
Monitor inventory levels of DVM parts to prevent shut down of production
Perform First Article Inspections (FM's) to ensure that MI fabricated and purchased parts meet tolerances

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Flexible Spending Accounts
educational assistance programs
family and medical leaves of absence

Fulltime

Quality Engineering Technician, Metrology

Figure

Location:
United States , San Jose

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 05, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Quality Engineering Technician, Metrology

Metrology Technician

Prototype Build Technician

Process/Assembly Technician

Material Testing and Calibration Technician

Calibration Technician

Senior Electrical Test Technician

Final Inspection Technician

Final Inspection Technician

Quality Engineering Technician, Metrology

Figure

Location:United States , San Jose

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 05, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Quality Engineering Technician, Metrology

Metrology Technician

Prototype Build Technician

Process/Assembly Technician

Material Testing and Calibration Technician

Calibration Technician

Senior Electrical Test Technician

Final Inspection Technician

Final Inspection Technician

Location:
United States , San Jose

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
January 05, 2026