Propulsion Technician Senior Job at Boeing (El Segundo)

Senior Test Engineer, Propulsion

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

134400.00 - 168000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Bachelor or MS degree in mechanical or mechatronics engineering
2+ years of experience with physical testing and analysis of mechanical or electronic systems against detailed requirements
2+ years of direct automation design and build experience (automated testing, manufacturing, robotics, industrial etc.)
Experience leading and driving technical projects to completion
Good understanding of electrical circuit design and power electronics
Experience with Python or NI(LabVIEW, TestStand, or VeriStand)
Experience with electrical test equipment, hand tools, power tools

Job Responsibility

Design and build reliable automated test equipment to conduct functional tests on PCBAs or modules
Work together with Design Engineers, System Engineers, and Reliability Engineers to Identify design critical operating modes and create design validation test plans
Work with test technicians to build validation test setups and execute test plans and teardowns
Investigate device failures to determine root cause and drive product improvements
Identify and plan critical tests to validate new technologies

Fulltime

Propulsion Technician Senior

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , El Segundo

Salary:

29.42 - 47.09 USD / Hour

Boeing

Expiration Date

May 29, 2026

Requirements

Minimum 4 years of relevant experience in propulsion assembly on high reliability products (preferably aerospace products)
Minimum 1 year experience of orbital tube welding
High School Diploma/GED
Ability to interpret drawing, schematics, harness wiring diagrams, internal and external specifications
Experience using inspection tooling (e.g. calipers, micrometers, DMM, depth gauges, etc.)
Demonstrates exceptional attention to detail
Ability to lift-up to 35 lbs
Experience with heater, thermistor installations
Experience with using various hand tools and power tools
Experience mixing epoxy materials

Job Responsibility

Weld, assemble, install, test, route/terminate/stake/wrap thermistors, heaters, non‐flight thermocouples and heaters on spacecraft assemblies by interpreting blueprints, engineering drawings and specifications, and written assembly, integration, and test procedures
Visually inspect propulsion assemblies to drawings, engineering specifications, and written assembly, and test procedure
Operate various materials handling equipment including forklifts, overheads cranes, aerial lift equipment, flight vehicle and sub-assembly transportation equipment, truck/tractor trailer combinations and other GSE as required
Travel maybe required to support operations identified by program being supported
Capable of operating a wide range of tools. Including but not limited to, orbital tube welding machines, tack welding machines, drill press, grinders, power and hand tools
Interface and /or works closely with Design and Manufacturing Engineering, Manufacturing, Materials, Procurement and Shipping personnel on procedural issuers involving design, methods, tooling, cost, and other areas involved in the control of product quality
Support in areas defined by Millennium Space System Leadership as business needs require
Crosstrain / mentor new hires
Other duties as assigned

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
Health insurance
Flexible spending accounts
Health savings accounts
Retirement savings plans
Life and disability insurance programs
Programs that provide for both paid and unpaid time away from work

Fulltime

New

Propulsion Technician Senior

The Propulsion Technician’s main responsibility is to execute orbital‑tube weldi...

Location

United States , El Segundo

Salary:

29.42 - 47.09 USD / Hour

Boeing

Expiration Date

March 31, 2026

Requirements

Minimum 4 years of relevant experience in propulsion assembly on high reliability products (preferably aerospace products)
Minimum 1 year experience of orbital tube welding
High School Diploma/GED
Ability to interpret drawing, schematics, harness wiring diagrams, internal and external specifications
Experience using inspection tooling (e.g. calipers, micrometers, DMM, depth gauges, etc.)
Demonstrates exceptional attention to detail
Ability to lift-up to 35 lbs
Experience with heater, thermistor installations
Experience with using various hand tools and power tools
Experience mixing epoxy materials

Job Responsibility

Perform Orbital tube welding for the fabrication of tube subassemblies and final propulsion tank closeouts
Assemble, install, test, route/terminate/stake/wrap thermistors, heaters, non‐flight thermocouples and heaters on spacecraft assemblies by interpreting blueprints, engineering drawings and specifications, and written assembly, integration, and test procedures
Visually inspect propulsion assemblies to drawings, engineering specifications, and written assembly, and test procedure
Operate various materials handling equipment including forklifts, overheads cranes, aerial lift equipment, flight vehicle and sub-assembly transportation equipment, truck/tractor trailer combinations and other GSE as required
Travel maybe required to support operations identified by program being supported
Capable of operating a wide range of tools. Including but not limited to, orbital tube welding machines, tack welding machines, drill press, grinders, power and hand tools
Interface and /or works closely with Design and Manufacturing Engineering, Manufacturing, Materials, Procurement and Shipping personnel on procedural issuers involving design, methods, tooling, cost, and other areas involved in the control of product quality
Support in areas defined by Millennium Space System Leadership as business needs require
Crosstrain / mentor new hires
Other duties as assigned

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations

Fulltime

Mechanical Technician Senior

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , El Segundo

Salary:

29.42 - 47.09 USD / Hour

Boeing

Expiration Date

March 31, 2026

Requirements

Minimum 4 years of relevant experience in mechanical or propulsion assembly on high reliability products (preferably aerospace products)
High School Diploma/GED
Ability to interpret mechanical drawings, schematics, harness wiring diagrams, internal and external specifications
Experience using inspection tooling (e.g. calipers, micrometers, DMM, depth gauges, etc.)
Demonstrated exceptional attention to detail
Ability to lift-up to 35 lbs
Experience with assembly tooling and/or composites fabrication and assembly
Experience with using various hand and power tools
Experience mixing epoxy materials
Excellent communication and teamwork skills

Job Responsibility

Assemble, install, test, checkout and inspect mechanical spacecraft assemblies by interpreting blueprints, engineering drawings and specifications, and written assembly, integration, and test procedures
Perform second party verifications and visually inspect mechanical assemblies to drawings, engineering specifications, and written assembly, integration, and test procedures
Operate various materials handling equipment including forklifts, overhead cranes, aerial lift equipment, flight vehicle and sub-assembly transportation equipment, truck/tractor trailer combinations and other GSE as required
Travel required to support operations identified by program being supported
Capable of operating a wide range of machine tools. Included but not limited to, drill press, grinders, chop saw, power, and hand tools
Interfaces and/or works closely with Design and Manufacturing Engineering, Manufacturing, Materials, Procurement and Shipping personnel on procedural issues involving design, methods, tooling, cost, and other areas involved in the control of product quality
Support in other mechanical areas defined by Millennium Space Systems Leadership as business needs require
Cross-train/mentor new hires

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
Health insurance
Flexible spending accounts
Health savings accounts
Retirement savings plans
Life and disability insurance programs
Programs that provide for both paid and unpaid time away from work

Fulltime

Mechanical Technician Senior

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , El Segundo

Salary:

29.42 - 47.09 USD / Hour

Boeing

Expiration Date

March 31, 2026

Requirements

Minimum 4 years of relevant experience in mechanical or propulsion assembly on high reliability products (preferably aerospace products)
High School Diploma/GED
Ability to interpret mechanical drawings, schematics, harness wiring diagrams, internal and external specifications
Experience using inspection tooling (e.g. calipers, micrometers, DMM, depth gauges, etc.)
Demonstrated exceptional attention to detail
Ability to lift-up to 35 lbs
Experience with assembly tooling and/or composites fabrication and assembly
Experience with using various hand and power tools
Experience mixing epoxy materials
Excellent communication and teamwork skills

Job Responsibility

Assemble, install, test, checkout and inspect mechanical spacecraft assemblies by interpreting blueprints, engineering drawings and specifications, and written assembly, integration, and test procedures
Perform second party verifications and visually inspect mechanical assemblies to drawings, engineering specifications, and written assembly, integration, and test procedures
Operate various materials handling equipment including forklifts, overhead cranes, aerial lift equipment, flight vehicle and sub-assembly transportation equipment, truck/tractor trailer combinations and other GSE as required
Travel required to support operations identified by program being supported
Capable of operating a wide range of machine tools. Included but not limited to, drill press, grinders, chop saw, power, and hand tools
Interfaces and/or works closely with Design and Manufacturing Engineering, Manufacturing, Materials, Procurement and Shipping personnel on procedural issues involving design, methods, tooling, cost, and other areas involved in the control of product quality
Support in other mechanical areas defined by Millennium Space Systems Leadership as business needs require
Cross-train/mentor new hires

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
Health insurance
Flexible spending accounts
Health savings accounts
Retirement savings plans
Life and disability insurance programs
Programs that provide for both paid and unpaid time away from work

Fulltime

Mechanical Technician Senior

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , El Segundo

Salary:

29.42 - 47.09 USD / Hour

Boeing

Expiration Date

March 31, 2026

Requirements

Minimum 4 years of relevant experience in mechanical or propulsion assembly on high reliability products (preferably aerospace products)
High School Diploma/GED
Ability to interpret mechanical drawings, schematics, harness wiring diagrams, internal and external specifications
Experience using inspection tooling (e.g. calipers, micrometers, DMM, depth gauges, etc.)
Demonstrated exceptional attention to detail
Ability to lift-up to 35 lbs
Experience with assembly tooling and/or composites fabrication and assembly
Experience with using various hand and power tools
Experience mixing epoxy materials
Excellent communication and teamwork skills

Job Responsibility

Assemble, install, test, checkout and inspect mechanical spacecraft assemblies by interpreting blueprints, engineering drawings and specifications, and written assembly, integration, and test procedures
Perform second party verifications and visually inspect mechanical assemblies to drawings, engineering specifications, and written assembly, integration, and test procedures
Operate various materials handling equipment including forklifts, overhead cranes, aerial lift equipment, flight vehicle and sub-assembly transportation equipment, truck/tractor trailer combinations and other GSE as required
Travel required to support operations identified by program being supported
Capable of operating a wide range of machine tools. Included but not limited to, drill press, grinders, chop saw, power, and hand tools
Interfaces and/or works closely with Design and Manufacturing Engineering, Manufacturing, Materials, Procurement and Shipping personnel on procedural issues involving design, methods, tooling, cost, and other areas involved in the control of product quality
Support in other mechanical areas defined by Millennium Space Systems Leadership as business needs require
Cross-train/mentor new hires

What we offer

Competitive base pay and variable compensation opportunities
Health insurance
Flexible spending accounts
Health savings accounts
Retirement savings plans
Life and disability insurance programs
Programs that provide for both paid and unpaid time away from work
Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits

Fulltime

New

Project Coordinator

We are looking for a Project Coordinator / PMO Analyst to support our client’s d...

Location

United States , Irvine

Salary:

20.00 - 25.00 USD / Hour

Technologent

Expiration Date

Until further notice

Requirements

3–5 years of experience working in a PMO, project coordination, or IT support role
Experience with Microsoft 365 tools, including MS Project, Power BI, Power Automate, and related reporting or integration work
Familiarity with project scheduling, coordination, and portfolio reporting
Basic project management education or certifications
College degree in Information Technology, Systems, or a related field
Strong organizational, documentation, and time-management skills
Excellent written and verbal communication abilities

Job Responsibility

Provide administrative and operational support for PMO tools, dashboards, and reporting
Serve as a technical administrator for PMO applications, including project and portfolio management platforms
Assist with project scheduling, resource coordination, and cost tracking
Monitor project status and follow up with Project Managers for updates and reporting
Coordinate PMO meetings, prepare agendas, track action items, and document outcomes
Develop requirements and support enhancements for PMO applications and workflows
Perform and track project audits, surveys, and compliance checks
Support PMO communications, including newsletters, status updates, and outage communications
Assist with rollout and adoption of PMO tools and processes across teams

New

Event Technician

A Technician is responsible for the set up and operation of basic / small-scale ...

Location

United States , East Naples

Salary:

15.64 - 20.33 USD / Hour

Encore Global

Expiration Date

Until further notice

Requirements

High School Diploma required
Associate’s degree is preferred
Internal applicants must meet/complete all training and certification requirements as determined by Encore’s Global Learning Training Program in their current position, and for the position they are applying to
External applicants must meet/validate and achieve/complete all training and certifications required for this position, within one year
1 year of customer service or hospitality experience is preferred
1 year of audio-visual experience or equivalent in an educational environment is preferred
A valid driver’s license is required for team members that may operate Company vehicles
Additional DOT requirements may need to be met if applicable
Must be able to lift 50 lbs.

Job Responsibility

Ensures a flawlessly executed event through accurate and timely setup, operation, and breakdown of basic audiovisual equipment
Strives to exceed the expectations and needs of internal and external customers
Maintains a positive relationship with all clients through effective communication
Meets with guests on site to ensure that their needs are met, and the equipment setup is working properly
Monitors events and checks in on customers throughout the day
Understands and fosters the hotel/client relationship
Understands the technical aspects of the job and demonstrates basic operational ability to troubleshoot and problem solve with equipment and software issues
Handles equipment challenges and changes in a timely and professional manner
Understands company processes, follows procedures, and completes systems entry and paperwork accurately
Uses the equipment sheets to determine the equipment scheduled for set up and for strike

What we offer

Paid Time Off
Vacation Days
Paid Holidays
Floating Holidays
Sick/Personal Days
Premium Recognition Program (CenterStage)
Performance Incentive Plans (GEI Bonus)
Employee Referral Program
Annual Merit
Classroom/On the Job Training

Parttime

Propulsion Technician Senior

Boeing

Location:
United States , El Segundo

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
February 13, 2026

Expiration:
March 31, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Propulsion Technician Senior

Senior Test Engineer, Propulsion

Propulsion Technician Senior

Propulsion Technician Senior

Mechanical Technician Senior

Mechanical Technician Senior

Mechanical Technician Senior

Project Coordinator

Event Technician

Propulsion Technician Senior

Boeing

Location:United States , El Segundo

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:February 13, 2026

Expiration:March 31, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Propulsion Technician Senior

Senior Test Engineer, Propulsion

Propulsion Technician Senior

Propulsion Technician Senior

Mechanical Technician Senior

Mechanical Technician Senior

Mechanical Technician Senior

Project Coordinator

Event Technician

Location:
United States , El Segundo

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
February 13, 2026

Expiration:
March 31, 2026