Project Engineer - Aerospace Hardware Electronics Job at Real Time Consulting (Phoenix)

Electrical Project Engineer

Apech Labs is a small business that supports the aerospace, military and energy ...

Location

United States , Amherst, NY

Salary:

70000.00 - 105000.00 USD / Year

Apech Labs

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Engineering
5 years' experience (or 3 with an MS degree)
Excellent verbal, written communication, organizational, and interpersonal skills
Ability to work in a team environment
United States Citizenship, or the legal ability to work in the U.S.

Job Responsibility

Drive project cadence, interface with customers and suppliers
Manage the bill of material and procure piece parts
Design real-time embedded electronic assemblies through the integration of off-the-shelf hardware and custom circuit boards
Creation of circuit board layouts and drawings which may include microprocessors and/or FPGAs, analog circuitry, and motor drive circuitry
Creation of test plans, review, and processing of test data
Assemble and test both deliverable hardware and test equipment
Participate in operations planning and maintenance
Machine and rework parts
build and rework cable assemblies
Operate as a key element in a team of creative, independent individuals

Fulltime

Electrical Engineer III

Arcfield was purpose-built to protect the nation and its allies through innovati...

Location

United States , Louisville, Colorado

Salary:

78649.80 - 136756.74 USD / Year

Arcfield

Expiration Date

Until further notice

Requirements

BS 5-7 Years, MS 3-5, PhD 0-2
Excellent documentation skills, including the preparation of Test Procedures & Reports, Interface Control Documents, and ECOs
Extensive experience in prototype development, debug, and test in a lab environment
Familiarity with various communication interfaces (I2C, SPI, UART, RS-232, RS-422, RS-485, CAN)
Proficiency in high-speed digital, analog, and mixed-signal circuit design, troubleshooting, and an excellent grasp of EE principles
Experience in system and sub-system testing including test design, procedure definitions, procurement, assembly, execution, analysis & reporting
Knowledge of cable and wire harness design
Experience with flight hardware safety protocols such as Electrostatic Discharge, clean room practices and critical lifting operations
Ability to travel to support meetings with customer and potential testing
Ability to work in a tight-knit team environment as well as self-driven for independent tasks

Job Responsibility

Works on assignments requiring considerable judgment and initiative
Develop solutions to routine technical problems of limited scope following detailed instructions
Performs an assortment of complex engineering duties such as the planning of manufacturing and the installation, operation, and maintenance of electrical apparatus
Provides existing support to activities in the use of electrical devices and energy for commercial, domestic, and industrial use
Design and develop electronics and circuits
Perform product testing and create models and prototypes
Develop and document electronic schematics for products
Performs a variety of engineering work in designing, planning and overseeing manufacture, construction, installation, operation, and maintenance of electric or electronic components, equipment, systems, facilities, and machinery used in generation, transmission, distribution, and utilization of electrical energy for domestic, commercial, and industrial consumption
Works directly with engineers in other disciplines to augment production size and value
May provide work leadership and training to lower level professional and technical staff

What we offer

Health Insurance
Life Insurance
Paid Time Off
Holiday Pay
Short Term and Long-Term Disability
Retirement and Savings
Learning and Development opportunities
wellness programs
other optional benefit elections

Fulltime

Electrical Lead, Power Architecture

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

163200.00 - 204000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Master’s degree in Electrical Engineering, Power Electronics, or a related discipline
7+ years of experience in power system design for EV, aerospace, or similar high-reliability applications
Strong background in: HV inverter and converter design (400V–1000V+)
LV system architecture and power distribution
Integration of motors, generators and control systems
Proficiency in system simulation, schematic capture, and hardware validation
Experience with wide-bandgap devices (SiC, GaN) and modern digital control platforms (MCUs, DSPs, FPGAs)
Systems-level thinking and multidisciplinary collaboration
Strong technical communication and documentation skills
Ability to lead cross-functional efforts and mentor junior engineers

Job Responsibility

Lead the design and architecture of HV propulsion inverter and generator systems, including semiconductor topology, switching control, EMI, and thermal performance
Architect the LV electrical system, including DC/DC converters, power distribution, auxiliary loads, grounding, and redundancy
Contribute to architecture definition, trade studies and help manage system-level electrical requirements and interfaces across HV and LV domains
Collaborate closely with battery, motor, avionics, software, and thermal teams to ensure integrated, reliable system design
Drive component selection, supplier evaluation, and validation planning for power electronics and distribution systems
Oversee simulation, modeling, and analysis activities (e.g., MATLAB/Simulink, PLECS, SPICE) for system behavior, loss estimation, and transient response
Develop and execute validation strategies, including module bring-up, EMC compliance, thermal testing, and integrated testing
Support functional safety analysis and documentation (e.g., ISO 26262, DO-160, ARP4754, DFMEA)
Maintain technical documentation and lead design reviews across project milestones

Fulltime

Digital Electronics Circuit & Unit Hardware Design Engineer

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , El Segundo; Los Angeles

Salary:

94350.00 - 155250.00 USD / Year

Boeing

Expiration Date

February 16, 2026

Requirements

Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
2+ years of experience with Digital Electronics, Digital Circuits, or Digital Electronics Hardware

Job Responsibility

Design and development of state-of-the art digital circuit & unit hardware / digital electronics for aerospace applications
Duties will include electronics design, requirements and interface definition, modeling and analysis, testing, performance and design verification
Technical support for production and test of electronic products
Support projects involving Electronics design
Maintain detailed requirements and specifications for various electronic products
Develop detailed designs of limited scope
Conducts various methods of testing and analysis to support design
Capture data for technical performance measures and performs basic analysis
Provide basic engineering support throughout the lifecycle of the product
Conducts trade studies and literature research to support future product designs

What we offer

Relocation based on candidate eligibility
Competitive base pay and variable compensation opportunities
Health insurance
Flexible spending accounts
Health savings accounts
Retirement savings plans
Life and disability insurance programs
Programs that provide for both paid and unpaid time away from work
Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly

Fulltime

Senior Project Engineer – Aerospace Systems

A growing aerospace technology organization is seeking a Senior Project Engineer...

Location

United States , Clearwater, FL

Salary:

Not provided

Robert Half

Expiration Date

Until further notice

Requirements

7+ years of engineering experience in aerospace product development
Bachelor’s degree in a STEM discipline or equivalent experience
Eligibility to work with export‑controlled technology (U.S. persons only)
Proven experience leading technical teams during new business pursuits and proposal development
Strong communication skills, including technical documentation and customer presentations
Ability to thrive in a fast‑paced, collaborative engineering environment
Experience with aerospace development standards such as MIL‑STD‑810, MIL‑STD‑461, DO‑178, DO‑160, and DO‑254
Background in electronic hardware or firmware development for aerospace or flight‑critical systems
Proficiency with requirements management tools (e.g., DOORS, Reqtify, Requisite Pro)
Familiarity with modern configuration management and issue‑tracking systems

Job Responsibility

Lead the full lifecycle development of aerospace sensing or computing systems, from initial concept through integration, verification, and product release
Drive technical proposal activities, including architecture definition, compliance assessments, cost estimation, and schedule planning
Manage system‑level requirements using industry‑standard tools, ensuring traceability, decomposition, change analysis, and verification planning
Develop and refine requirements for technologies such as: High‑speed digital communication interfaces (e.g., MIL‑STD‑1553, ARINC 429, RS‑485, CAN, Ethernet, USB)
Compact power systems supporting internal electronics and external components
Embedded computing platforms using CPUs, microcontrollers, or DSPs
Control circuitry for electromechanical or thermal subsystems (PID, LQG, etc.)
Dynamic modeling of aerospace sensors and associated system interactions
Mathematical modeling of system performance, including uncertainty analysis
Partner with hardware, software, and test engineering teams to ensure requirements are implementable, testable, and aligned with program objectives

What we offer

medical
vision
dental
life and disability insurance
401(k) plan

Team Lead Control Systems, Avionics Hardware

You will be an integral part of the Avionics, Guidance, Navigation & Control (AG...

Location

Germany , Ottobrunn

Salary:

Not provided

Isar Aerospace

Expiration Date

Until further notice

Requirements

Bachelor’s/Master’s degree in the fields of Electrical Engineering, Aerospace Engineering, Power Electronics or similar
Leadership experience of 4+ years, ideally in a start-up environment
Extensive experience in electrical circuit and board design
Excellent knowledge in ECAD tools, preferably in Altium Designer
Extensive hands-on experience in electrical unit design and test
Extensive hands-on experience in hardware design of embedded systems
Extensive knowledge of manufacturing processes for printed circuit board assemblies
Experience in environmental testing of electrical units
Fluent in English

Job Responsibility

Manage the Control Units Team programmatically and disciplinary, mentor and develop your team of electrical engineers
Manage related tasks and projects, monitor progress, and ensure completion within defined timelines
Ensure engineering excellence for avionic units through requirements, reviews and continuous improvement
Plan and carry out automated unit qualification and acceptance tests
Plan and conduct vehicle integration and testing for your products, both in Germany and on the launch pad
Own and improve the manufacturing, assembly and coating process of printed circuit boards with both internal and external partners
Manage the ECAD environment of Isar Aerospace, own and improve design rules and guidelines
Lead failure analysis of electrical units & systems

What we offer

Employee Participation Program: Share in our success through our virtual company share program
30 days of vacation
Company pension plan: Secure your future with our company pension plan, featuring a 20% employer contribution after the probation period
Subsidised lunch: Stay energised with delicious, subsidised lunches every day
Public transport ticket: Commute with ease using a fully financed Deutschlandticket
Sport Clubs membership: Stay fit with our sponsored sports club memberships (EGYM Wellpass)
Individual learning allowance: Grow your skills with an individual learning budget granted after the probation period
Childcare allowance: Receive a childcare allowance for your non-school-age children

Fulltime

Avionics Radiation Hardness Assurance Engineer

Are you passionate about human space exploration, understanding the origins of t...

Location

United States , Houston

Salary:

Not provided

Amentum

Expiration Date

Until further notice

Requirements

Typically requires a bachelor's degree in Engineering and a minimum of 1 year of experience in the field or in a related area
Be familiar with the subject matter expertise (SME) and/or specialty engineering field in radiation effects in microelectronics for NASA spaceflight (or similar complexity)
Work directly with technicians, engineers, managers, and other stakeholders on a wide variety of Projects
Possess technical knowledge of radiation effects in microelectronics and avionics systems, may include: basic mechanisms for single-event effects and total dose, test strategies, mitigation techniques, and analysis of circuits, systems, and data links
Be familiar with the suite of activities known as Radiation Hardness Assurance (RHA) for avionics (analog, digital, power, etc.): determining Mission, Environment, Application, and Lifetime (MEAL) factors, developing and interpreting requirements, bill-of-materials requirement gap analysis, radiation testing, environment definition, radiation transport, shielding analysis, dose-depth curves, Single-Event Effects Criticality Analysis (SEECA), derating, Safe Operating Area (SOA), Radiation Design Margin (RDM), etc.
Assess EEE parts, circuits, functions, components, subsystems, and systems to evaluate risks, effectiveness of mitigation strategies, and the ability to meet functional, performance, and reliability requirements during and after exposure to the mission ionizing radiation environment
Lead or support screening and characterization test efforts for heavy ion, proton, and pulsed-laser Single-Event Effects (SEE), Total Ionizing Dose (TID), Enhanced Low-Dose Rate Sensitivity (ELDRS), Total Non-Ionizing Dose (TNID), Displacement Damage Dose (DDD), etc.
Create detailed radiation assessments, presentations, test plans, analyses, and reports
Design, troubleshoot, and repair new and existing radiation test setups, may include: cables, laboratory test equipment, printed circuit boards, software, firmware, hardware description languages, etc.
Test Engineer / Lab Scientist with at least 1 year experience

Job Responsibility

Report directly to the Electronics and Electrical Section Manager as part of group of over 45 other Electronics and Electrical Engineers
Be familiar with systems engineering and integration (S&EI) and/or specialty engineering for NASA spaceflight (or similar complexity)
Support new projects and sustaining efforts throughout product life cycle, including: standards adjudications, system requirements reviews, preliminary design reviews, critical design reviews, manufacturing readiness reviews, flight readiness reviews, and failure investigations, as well as testing, analysis, inspection, sustaining support efforts
Drive critical decision-making processes for performing radiation testing, deriving part performance classification and taxonomy, and improving vehicle and subsystem level radiation reliability and survivability
Tailor Radiation Hardness Assurance (RHA) requirements based upon mission, environment, application, and lifetime (MEAL) factors as well as program/project risk posture
Bound stochastic and deterministic electronics failure modes induced by natural space radiation environment
Write verification test plans, test procedures, and test reports against product requirement
Ability to read and understand schematics for circuit and system diagrams to evaluate upstream and downstream impacts for transient analysis
Collaborate with design engineers, project personnel, and other stakeholders to evaluate performance of electronic hardware and assess need to address impacts to functional, performance, reliability, and availability metrics
Support program activities on behalf of subject matter experts (SMEs) by assessing relevance information with technical discussions to determine need to request SME consideration, and then accurately conveying SME assessments back to program and project stakeholders

What we offer

Excellent personal and professional career growth
9/80 work schedule (every other Friday off), when applicable
Onsite cafeteria (breakfast & lunch)

Fulltime

Lead Engineer (Design Authority)

You will be at the forefront of UAS innovation, developing future capability on ...

Location

United Kingdom , Bristol

Salary:

Not provided

Tekever

Expiration Date

Until further notice

Requirements

12+ years in aerospace engineering, with a significant portion dedicated to UAS or complex military systems
Proven track record as a Lead Engineer or Design Authority on a complex hardware-software integration project
Deep understanding of UK Military Registered Aircraft (MRP) or Civil (CAA/EASA) certification frameworks
Degree in Aerospace, Systems, or Electronic Engineering
Chartered Engineer (CEng) status is expected for this level of authority
Must currently hold, or be eligible to obtain, UK SC (Secret) Clearance
The ability to make critical "go/no-go" technical decisions under pressure
A commitment to the highest standards of engineering ethics and safety-critical rigor
Capable of briefing senior military officers and technical experts alike, distilling complex engineering risks into clear operational impacts
A proactive desire to embrace new processes and drive continuous improvement in engineering methods

Job Responsibility

Act as the final technical signatory for design changes, ensuring the platform maintains its design intent and safety margins throughout the development lifecycle
Lead a multi-disciplinary team (Airframe, Avionics, Software, and Comms) to ensure seamless integration of mission systems and payloads
Drive the strategy for airworthiness requirements (working toward MRP/RA standards), ensuring all documentation is robust and audit-ready
Define the technical direction of the UAS program, managing complex trade-offs and evolving capability requirements
Oversee the flow-down of high-level end user requirements into actionable engineering specifications
Serve as the lead technical liaison with the MoD, DE&S, and external partners, leading design reviews and safety committees

What we offer

An excellent work environment and an opportunity to make a difference

Fulltime

Project Engineer - Aerospace Hardware Electronics

Real Time Consulting

Location:
United States , Phoenix

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
December 11, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Project Engineer - Aerospace Hardware Electronics

Electrical Project Engineer

Electrical Engineer III

Electrical Lead, Power Architecture

Digital Electronics Circuit & Unit Hardware Design Engineer

Senior Project Engineer – Aerospace Systems

Team Lead Control Systems, Avionics Hardware

Avionics Radiation Hardness Assurance Engineer

Lead Engineer (Design Authority)

Project Engineer - Aerospace Hardware Electronics

Real Time Consulting

Location:United States , Phoenix

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:December 11, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Project Engineer - Aerospace Hardware Electronics

Electrical Project Engineer

Electrical Engineer III

Electrical Lead, Power Architecture

Digital Electronics Circuit & Unit Hardware Design Engineer

Senior Project Engineer – Aerospace Systems

Team Lead Control Systems, Avionics Hardware

Avionics Radiation Hardness Assurance Engineer

Lead Engineer (Design Authority)

Location:
United States , Phoenix

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
December 11, 2025