Production Technician - Fill Job at Baxter (Marion)

Production Technician I

The Fill/Pouch Production Technician I contributes to saving and sustaining live...

Location

United States , Marion

Salary:

41305.58 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma, GED or equivalent
Must be at least 18 years of age
Must have basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Must be able to perform basic mathematics
Proficient in how to use a calculator and measurement tools as well as basic hand tools
Must have basic computer skills
CRC (Career Readiness Certification) at the Silver level preferred
Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc. preferred
This position requires frequent grasping, pushing/pulling and reaching with hands and arms

Job Responsibility

Operate, monitor and make adjustments as necessary to manual and automated filling equipment and machines using controls on an electrical control panel (HMI) or by way of manual adjustments
Set-up, load and replenish production supplies by use of a powered industrial truck (PIT) at a rate consistent with production needs
Perform minor routine and preventative maintenance such as alignment adjustments, replacement of machine parts or belts, cleaning and lubrication while supporting Total Productive Maintenance (TPM)
Reconcile headcount needed on a per shift basis based on schedule production demands
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Inspect finished product to ensure quality standards are being met
Execute Batch/Code changes, tank changes, as well as sub lots as required
Document required information on manufacturing logs and/or POMS system
Investigate, identify and correct or escalate any inefficiency in the machine’s performance including mechanical wear, alignment, adjustment, and setup issues
Develop standard work for troubleshooting and setups/changeovers

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement.

Parttime

Production Technician I, Fill/Pouch

The Fill/Pouch Production Technician I contributes to Baxter's mission of saving...

Location

United States , Marion

Salary:

44000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma, GED or equivalent
Must be at least 18 years of age
Must have basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Must be able to perform basic mathematics
Proficient in how to use a calculator and measurement tools as well as basic hand tools
Must have basic computer skills
CRC (Career Readiness Certification) at the Silver level preferred
Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc. preferred
Frequent grasping, pushing/pulling and reaching with hands and arms

Job Responsibility

Operate, monitor and make adjustments as necessary to manual and automated filling equipment and machines using controls on an electrical control panel (HMI) or by way of manual adjustments
Set-up, load and replenish production supplies by use of a powered industrial truck (PIT) at a rate consistent with production needs
Perform minor routine and preventative maintenance such as alignment adjustments, replacement of machine parts or belts, cleaning and lubrication while supporting Total Productive Maintenance (TPM)
Reconcile headcount needed on a per shift basis based on schedule production demands
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Inspect finished product to ensure quality standards are being met
Execute Batch/Code changes, tank changes, as well as sub lots as required
Document required information on manufacturing logs and/or POMS system
Investigate, identify and correct or escalate any inefficiency in the machine’s performance including mechanical wear, alignment, adjustment, and setup issues
Develop standard work for troubleshooting and setups/changeovers

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement.

Fulltime

Production Technician I, Fill/Pouch

The Fill/Pouch Production Technician I contributes to Baxter's mission of saving...

Location

United States , Marion

Salary:

44000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma, GED or equivalent
Must be at least 18 years of age
Must have basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Must be able to perform basic mathematics
Proficient in how to use a calculator and measurement tools as well as basic hand tools
Must have basic computer skills
CRC (Career Readiness Certification) at the Silver level preferred
Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc. preferred
Frequently grasping, pushing/pulling and reaching with hands and arms

Job Responsibility

Operate, monitor and make adjustments as necessary to manual and automated filling equipment and machines
Set-up, load and replenish production supplies by use of a powered industrial truck
Perform minor routine and preventative maintenance
Reconcile headcount needed per shift based on schedule production demands
Perform scheduled quality checks and disposition product
Inspect finished product to ensure quality standards
Execute Batch/Code changes, tank changes, as well as sub lots
Document required information on manufacturing logs and/or POMS system
Investigate, identify and correct or escalate machine inefficiencies
Develop standard work for troubleshooting and setups/changeovers

What we offer

Shift flexibility
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement.

Fulltime

Production Technician I

The technician will be responsible for assembling, operating, and monitoring sta...

Location

United States , Melrose Park

Salary:

24.00 USD / Hour

HonorVet Technologies

Expiration Date

Until further notice

Requirements

Have a minimum of a High School Diploma, GED, or equivalent education with one year of experience in a relevant work environment
Able to work 12hr shifts on a 2-2-3 schedule
Able to stand on concrete floors for an extended period of time
Able to lift up to 35 pounds by bending and lifting
Able to move heavy equipment and components as needed
Able to work with hazardous materials including antineoplastic products and raw materials that could lead to serious illness/injury
Able to wear required personal protective equipment (eye protection, safety shoes, gown, gloves)
Must be able to understand, speak, and write English in order to comply with necessary SOPs, SPECs, Job-specific training materials, GMPs, and other manuals

Job Responsibility

Assembling, operating, and monitoring state-of-the-art, aseptic equipment following applicable Standard Operating Procedures and current Good Manufacturing Practices
Practice good aseptic techniques to minimize the potential for product contamination
Understand advanced computerized systems through HMI
Ability to operate advanced HMI applications
Perform basic level machine operation, set-up and troubleshooting of all state-of-the-art equipment in their area
Load Parts Washer, Component Sterilizer, Vial Washer, Filling Machine and Capping Machine with raw materials and format parts
Maintains a down qualification if required by their area
Perform microbiological monitoring within the Filling Machine, ALUS, and Capping Machine
Assist other departments including MQA, Maintenance, Metrology, Engineering, Validation, Tech Transfer and Microbiology, with tasks on the equipment in their area General
Clean and sanitize equipment and Production areas per SOP

Fulltime

Maintenance Technician

The Maintenance Technician - DP reports to the Maintenance Area Lead – DP & Pkg ...

Location

Ireland , Cork

Salary:

Not provided

BioMarin Pharmaceutical

Expiration Date

January 05, 2026

Requirements

A relevant third level qualification in Engineering or time-served apprenticeship
3+ years’ experience in a GMP environment, preferably Bio-pharmaceuticals or equivalent industry with drug product fill finishing and packaging activities

Job Responsibility

Proactively maintain and troubleshoot drug product filling line equipment and parts preparation equipment in accordance with cGMP regulations, applicable safety considerations, Standard Operating Procedures, best maintenance practices and the reliability agenda
Interact with all process partners to continuously improve operations by recognising and correcting the causes of less than optimal equipment, facility and team performance
Manage external vendor support to complete required services in a GMP compliant manner
Perform problem solving including root cause analysis as required when equipment failures result in loss of production, substandard equipment performance and substantial repair cost and/or personnel safety incidents
Ensure Electrical, Process and Utility Systems are maintained in a controlled state thus ensuring compliance with all procedures and regulations and reliability initiatives
Maintain a safe working environment by continuously promoting safety awareness, recognising and rectifying unsafe conditions and performing thorough investigations when accidents occur
Record all maintenance work performed on the site CMMS system
Respond to critical utility alarms generated from the site automated alarm messenger system
Maintain documentation and management and control systems in compliance with cGMP regulations and training instructions
Where required complete and record calibrations activities completed on site and report any defects detected

New

Production Technician I - Fill/Pouch

This is where my hands make life-sustaining products. You are driven by the know...

Location

United States , Marion

Salary:

44000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma or GED and must be at least 18 years of age
CRC (Career Readiness Certification) at the Silver level preferred
Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc. preferred
Basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Ability to perform basic mathematics
Proficient in how to use a calculator and measurement tools as well as basic hand tools
Basic computer skills
Physical Requirements: This position requires frequent grasping, pushing/pulling and reaching with hands and arms. The position also involves lifting up to 50 pounds occasionally throughout the shift
Pass the Powered Industrial Truck (P.I.T.) physical

Job Responsibility

Operate, monitor and make adjustments as necessary to manual and automated filling equipment and machines using controls on an electrical control panel (HMI) or by way of manual adjustments
Set-up load and replenish production supplies by use of a powered industrial truck (PIT) at a rate consistent with production needs
Perform minor routine and preventative maintenance such as alignment adjustments, replacement of machine parts or belts, cleaning and lubrication while supporting Total Productive Maintenance (TPM)
Reconcile headcount needed on a per shift basis based on schedule production demands
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Inspect finished product to ensure quality standards are being met
Complete batch/code changes, tank changes, as well as sub lots as needed
Document required information on manufacturing logs and/or POMS system
Investigate, identify and correct or escalate any inefficiency in the machine’s performance including mechanical wear, alignment, adjustment, and setup issues
Develop standard work for troubleshooting and setups/changeovers

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Flexible Spending Accounts
educational assistance programs

Fulltime

New

Production Technician I - Fill/Pouch

The Fill Production Technician I is a Salaried Non-Exempt position which contrib...

Location

United States , Marion

Salary:

44000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma or GED and must be at least 18 years of age
CRC (Career Readiness Certification) at the Silver level preferred
Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc. preferred
Basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Ability to perform basic mathematics
Proficient in how to use a calculator and measurement tools as well as basic hand tools
Basic computer skills
Physical Requirements: frequent grasping, pushing/pulling and reaching with hands and arms
lifting up to 50 pounds occasionally

Job Responsibility

Operate, monitor and make adjustments as necessary to manual and automated filling equipment and machines using controls on an electrical control panel (HMI) or by way of manual adjustments
Set-up load and replenish production supplies by use of a powered industrial truck (PIT)
Perform minor routine and preventative maintenance such as alignment adjustments, replacement of machine parts or belts, cleaning and lubrication while supporting Total Productive Maintenance (TPM)
Reconcile headcount needed on a per shift basis based on schedule production demands
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Inspect finished product to ensure quality standards are being met
Complete batch/code changes, tank changes, as well as sub lots as needed
Document required information on manufacturing logs and/or POMS system
Investigate, identify and correct or escalate any inefficiency in the machine’s performance including mechanical wear, alignment, adjustment, and setup issues
Develop standard work for troubleshooting and setups/changeovers

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
Flexible Spending Accounts
educational assistance programs

Fulltime

New

Pharmacy Technician - Data Entry

Ready to step into a pivotal role where your skills bring life-changing medicati...

Location

United States , San Diego

Salary:

Not provided

Strive Compounding Pharmacy

Expiration Date

Until further notice

Requirements

Certified and licensed pharmacy technician, or licensed pharmacy technician trainee
1+ years in a pharmacy data entry position (retail/community/mail-order)
Positive attitude
Adapts to teamwork environment
Professionalism with customers
Self-motivated and takes initiative
Takes pride in work
Dependable and hardworking
Overdelivers with customers and offices we work with
Authenticity

Job Responsibility

Responsible for filling orders in our sterile and non-sterile fill zones
Assisting with assembly of prescription orders
Managing the front end for customer pick ups
Coordinating orders to be filled with our lab teams
Filling in production zones where needed

What we offer

Employer paid healthcare coverage available after 30 days of employment
Choice of an FSA/HSA
Voucher for new hire scrubs (if applicable)
Parental leave
401(k) plan with matching contributions
Weekends and holidays off
FREE COMPOUNDED MEDS to employees and immediate family members

Fulltime

Production Technician - Fill

Baxter

Location:
United States , Marion

Category:
Manufacturing

Contract Type:
Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
March 20, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Production Technician - Fill

Production Technician I

Production Technician I, Fill/Pouch

Production Technician I, Fill/Pouch

Production Technician I

Maintenance Technician

Production Technician I - Fill/Pouch

Production Technician I - Fill/Pouch

Pharmacy Technician - Data Entry

Production Technician - Fill

Baxter

Location:United States , Marion

Category:Manufacturing

Contract Type:Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:March 20, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Production Technician - Fill

Production Technician I

Production Technician I, Fill/Pouch

Production Technician I, Fill/Pouch

Production Technician I

Maintenance Technician

Production Technician I - Fill/Pouch

Production Technician I - Fill/Pouch

Pharmacy Technician - Data Entry

Location:
United States , Marion

Category:
Manufacturing

Contract Type:
Employment contract

Job Posted:
March 20, 2025