CrawlJobs Logo

Process Engineer Lead - Die Cast

herbrucks.com Logo

Herbruck Poultry Ranch

Location Icon

Location:
United States , Fond du Lac

Category Icon
Category:
Manufacturing

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

84500.00 - 136100.00 USD / Year
Save Job
Save Icon
Apply Position

Job Description:

A Die Cast Process Engineer Lead is a critical engineering leader in Mercury’s aluminum foundry (Plant 17) with direct responsibility for the die casting process, equipment selection and troubleshooting, process control analytics, and provide supervisory leadership of the Process Technicians.

Job Responsibility:

  • Supervisory leadership for salaried Process Technicians which work across all three shifts (6 employees total, 2 on each shift)
  • Troubleshooting responsibilities for die casting machines and the entire die casting process
  • Engagement in specifying and selecting new die casting machines and process equipment associated with the die casting process (spray, ladle, extraction, thermal, etc)
  • Collaborate with engineering to develop and optimize processes for new parts and tools launched into production
  • Lead process control efforts and process optimization to identify and define process parameters while minimizing adjustments made once approved
  • Establish if a die casting quality issue is due to tooling, setup, and/or machine problems using available test equipment and deductive reasoning
  • Provide feedback and improvement ideas to tooling, simulation, and product design groups
  • Works with quality department on findings of X-Ray and dimensional results to reduce and eliminate quality concerns
  • Provide guidance to maintenance personal on unusual machine problems effecting the die casting process
  • Introduces and refines new die casting methods and procedures to keep Mercury at the leading edge of die cast technology
  • Completes data analysis to ensure process control
  • Responsibility for creating and maintaining proper process documentation
  • Communicates and interfaces with engineering to ensure long-term improvements and root cause corrective actions are completed

Requirements:

  • Desire to be “hands on” at the shop-floor level within a foundry environment
  • Ability to produce results independently and within groups/teams
  • Knowledge of high pressure die casting and finishing operations
  • Great communication and interpersonal skills with a proven record to effectively participate in a cross-functional team
  • Successful project management and time management skills
  • Ability to excel in an extremely dynamic and constantly changing manufacturing environment
  • Leadership and supervisory experience for technical trade positions
  • Willingness to apply computer technology to track and improve the die casting process
  • Working knowledge of hydraulics and robotics

Nice to have:

  • Bachelor's Degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or related field
  • 15+ years of direct die casting experience in similar role without a formal engineering degree
  • 5+ years in a die casting foundry
  • Proficiency in MS office software including Teams, Excel, and Planner
  • Experience with data analytics and reporting tools like SQL and Power BI
  • Experience with ABB robots (setting points, adjusting programs, etc)
  • Understanding of CMM and other dimensional reporting
  • Understanding of machining processes on castings
  • Ability to read, review, and analyze process data to help troubleshoot processes
What we offer:
  • Medical
  • Dental
  • Vision
  • Paid vacation
  • 401k (up to 4% match)
  • Health Savings Account (with company contribution)
  • Well-being program
  • Product purchase discounts
  • Annual discretionary bonus

Additional Information:

Job Posted:
February 20, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Herbruck Poultry Ranch - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Process Engineer Lead - Die Cast

Supplier Quality & Development Engineer – Castings & Machining

The Supplier Quality & Development Engineer (SQDE) is responsible for ensuring t...
Location
Location
India , Coimbatore
Salary
Salary:
Not provided
husco.com Logo
Husco
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BE/Diploma in Mechanical or Production Engineering
  • 10–12 years of experience in supplier quality and development, with strong exposure to – Green sand moulding, Gravity Die casting, Pressure Die Casting, Low Pressure Die Casting and machining processes
  • Hands-on experience with APQP, PPAP, FMEA, SPC, MSA, ISO 9001, and IATF 16949
  • Proficiency in GD&T, CMM inspection, and machining tolerances
  • Strong analytical, problem-solving, and cross-functional collaboration skills
  • Willingness to travel to supplier locations for audits and development activities
Job Responsibility
Job Responsibility
  • Manage day-to-day supplier quality issues and ensure robust containment on production lines
  • Issue NCRs and lead root cause analysis (RCA) and 8D problem-solving with suppliers
  • Develop and implement containment methods, SOPs, and quality plans for supplier PDAs and inspections
  • Lead MRB processes and manage disposition of non-conforming parts
  • Monitor and report supplier performance (PPM, NCRs, FTT)
  • Support QMS compliance during customer and IATF audits
  • Deliver supplier training on quality awareness, Q-alerts, and risk assessments
  • Evaluate and develop supplier capabilities in casting and precision machining
  • Lead continuous improvement projects throughout the casting and machining supply chain
  • Utilize data analytics to assess supplier performance and quality
Read More
Arrow Right
New

Manufacturing Engineer

Randstad Engineering is hiring a Manufacturing Engineer for a global leader in a...
Location
Location
Canada , Strathroy
Salary
Salary:
Not provided
https://www.randstad.com Logo
Randstad
Expiration Date
April 28, 2026
Flip Icon
Requirements
Requirements
  • Bachelor’s Degree in Mechanical Engineering or a related technical field
  • 5–10 years of engineering/manufacturing experience within the automotive industry
  • Ability to travel globally up to 25%+ (including potential temporary relocation for launch support)
  • Proven leadership in global launch programs and technology development
  • Strong background in secondary operations and assembly
  • Expertise in Project Management, Quality standards, and Health & Safety
  • Exceptional communication skills and the ability to coach/motivate cross-functional teams
Job Responsibility
Job Responsibility
  • Global Launch Leadership: Act as the project lead for new product launches, ensuring all timing, cost, and quality KPIs are met globally
  • Technical SME: Serve as the global lead for CNC machining, assembly, and die-casting process development
  • APQP & Standardization: Develop and maintain APQP documentation and ensure all new launches adhere to rigorous global standards
  • Operational Excellence: Lead troubleshooting efforts and implement permanent corrective actions for complex production issues
  • Sustainability: Champion energy efficiency and waste reduction initiatives across the manufacturing lifecycle
  • Stakeholder Liaison: Act as the primary technical point of contact for major OEMs, suppliers, and internal global leadership
  • Team Management: Supervise, train, and manage the performance of engineering and technical staff
What we offer
What we offer
  • Competitive salary and company benefits
  • Opportunities for professional learning, development, and growth
  • Working with a fun, exciting, and supportive team
  • Fulltime
Read More
Arrow Right

HTRC Tooling Engineer

This is a unique opportunity to work within a collaboration between the Universi...
Location
Location
United Kingdom , Coventry
Salary
Salary:
40000.00 - 60000.00 GBP / Year
the-mtc.org Logo
Manufacturing Technology Centre
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree qualified (or equivalent experience) in a relevant engineering discipline
  • Strong understanding of manufacturing engineering principles
  • Knowledge of turbine components OR investment casting OR machining processes
  • Understanding of investment casting tooling design (e.g., wax pattern dies)
  • Strong skills in problem solving, programme management, risk management, and technical communication
Job Responsibility
Job Responsibility
  • Designing and specifying tooling, fixtures, and modelling solutions for investment casting and machining
  • Developing machining methods and supporting manufacturing process improvement activities
  • Working with designers, toolmakers, and CA teams to deliver tooling hardware and modelling activity on time
  • Supporting Capability Acquisition Reviews, technical packages, and technology updates
  • Providing regular progress updates to key stakeholders
  • Helping build capability for producing small, complex parts with novel geometries
  • Driving innovation and contributing to world‑leading research in single‑crystal casting and machining
What we offer
What we offer
  • Excellent Pension Scheme
  • Flexible Working
  • Fulltime
Read More
Arrow Right

Director, Mechanical Engineering

The Director of Mechanical Engineering at Axon has full responsibility over the ...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering or equivalent experience (Master’s degree preferred)
  • Minimum 15+ years of product design experience in high-end consumer or professional electronic products
  • Minimum 6+ years of leading mechanical engineering teams
  • Skilled with hiring and developing high performing teams
  • Proven record of launching high volume electronic product concepts through production
  • Experience with high volume manufacturing and assembly processes
  • Extensive experience collaborating with, and managing, overseas development and manufacturing partners
  • Knowledge working with PDM/PLM systems
  • Experience with change management systems and processes
  • Strong DFM/DFA skills, with emphasis on part/assembly tolerance management, to ensure robust designs for high volume manufacturing
Job Responsibility
Job Responsibility
  • Lead and inspire a talented team of mechanical engineers to innovate, create, and achieve their full potential in a fast-paced and dynamic environment
  • Review and guide the detailed design, development, and testing of cutting-edge mechanical products, systems, and components
  • Enforce engineering rigor and due diligence throughout development lifecycle
  • Ensure projects are executed with precision and meet the highest quality standards
  • Shape and execute the mechanical engineering strategy that drives our company's mission and vision
  • Forge connections with other departments, from marketing to manufacturing, to create a cohesive business strategy
  • Build and maintain relationships with external partners and vendors
  • Regularly communicate project progress, key milestones, and any challenges that arise to senior management
  • Utilize creative problem solving skills to lead ideation of new product architectural concepts for subsystem and system level designs
What we offer
What we offer
  • Competitive salary and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • Snacks in our offices
  • Fulltime
Read More
Arrow Right

Director, Mechanical Engineering

The Director of Mechanical Engineering at Axon has full responsibility over the ...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering or equivalent experience (Master’s degree preferred)
  • Minimum 15+ years of product design experience in high-end consumer or professional electronic products
  • Minimum 6+ years of leading mechanical engineering teams
  • Skilled with hiring and developing high performing teams
  • Proven record of launching high volume electronic product concepts through production
  • Experience with high volume manufacturing and assembly processes
  • Extensive experience collaborating with, and managing, overseas development and manufacturing partners
  • Knowledge working with PDM/PLM systems
  • Experience with change management systems and processes
  • Strong DFM/DFA skills, with emphasis on part/assembly tolerance management, to ensure robust designs for high volume manufacturing
Job Responsibility
Job Responsibility
  • Lead and inspire a talented team of mechanical engineers to innovate, create, and achieve their full potential in a fast-paced and dynamic environment
  • Review and guide the detailed design, development, and testing of cutting-edge mechanical products, systems, and components
  • Enforce engineering rigor and due diligence throughout development lifecycle
  • Ensure projects are executed with precision and meet the highest quality standards
  • Shape and execute the mechanical engineering strategy that drives our company's mission and vision
  • Forge connections with other departments, from marketing to manufacturing, to create a cohesive business strategy
  • Build and maintain relationships with external partners and vendors
  • Regularly communicate project progress, key milestones, and any challenges that arise to senior management
  • Utilize creative problem solving skills to lead ideation of new product architectural concepts for subsystem and system level designs
What we offer
What we offer
  • Competitive salary and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • Fulltime
Read More
Arrow Right

Senior Mechanical Engineer

Cerebras Systems builds the world's largest AI chip, 56 times larger than GPUs. ...
Location
Location
United States , Sunnyvale
Salary
Salary:
190000.00 - 230000.00 USD / Year
cerebras.net Logo
Cerebras Systems
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 10+ years of experience as a Mechanical Design Engineer
  • BS in Mechanical Engineering
  • Strong analytical, diagnostic and problem-solving skills
  • Very strong in 3D solids modeling CAD package, proficiency with Solidworks would be preferable
  • Proficient with PLM system, such as Arena or Agile
  • Proficient in CTF dimensioning and GD&T
  • Must be able to do full Tolerance Analysis of complex systems and have working knowledge of FEA
  • Great team player with strong interpersonal & communication skills
  • Must have in-depth knowledge of all latest fabrication processes
  • sheet metal, machining, die-casting, injection molding, and 3D printing
Job Responsibility
Job Responsibility
  • Lead the design of mechanical systems for our next-generation wafer-scale engine
  • Ensure compliance with specifications, validating manufacturability, and delivering a high-quality product in a fast-paced environment
  • Develop mechanical infrastructure for Cerebras’ custom hardware system
  • Rapidly iterate on designs and analysis to inform high level systems trades and steer overall product direction
  • Provide comprehensive support for environmental and performance testing on hardware, validating analyses, and ensuring compliance with design criteria
  • Ownership of technical deliverables
  • Conduct first article inspections, functional analysis, identify and resolve issues
  • Collaborate across design-manufacturing-production, diagnostic and embedded software engineering teams, contractors and suppliers
  • Perform detailed structural analysis to engineer robust
  • Work in a fast paced, high energy environment with short product development cycles on many challenging electro-mechanical projects
What we offer
What we offer
  • Bonus and equity
  • Build a breakthrough AI platform beyond the constraints of the GPU
  • Publish and open source their cutting-edge AI research
  • Work on one of the fastest AI supercomputers in the world
  • Enjoy job stability with startup vitality
  • Simple, non-corporate work culture that respects individual beliefs
  • Fulltime
Read More
Arrow Right

Manufacturing Mechanical Engineer

Etched is hiring a versatile Manufacturing Mechanical Engineer. You will own the...
Location
Location
Taiwan , Taipei
Salary
Salary:
Not provided
etched.com Logo
Etched
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s or Master’s degree in Mechanical Engineering or a related field
  • 5+ years of experience in manufacturing, mechanical design, product design, or equivalent
  • Proven experience in enclosure/electro-mechanical system builds, thermals, cables, interconnects, fasteners, hoses, and mechanical DFM
  • Knowledge of manufacturing processes, including CNC machining, sheet metal, die casting, plastic molding, and cooling solutions
  • Hands-on experience with CAD/CAE tools (NX, SolidWorks, etc) and GD&T practices
  • Strong problem-solving skills with a focus on yield, manufacturability, quality, failure analysis, and cost optimization
  • Experience collaborating with suppliers, CMs, ODMs, and Tier 2 suppliers
  • Familiarity with process validation, DOE, reliability testing, and FA
  • Strong communication and teamwork skills to collaborate effectively with cross-functional teams
Job Responsibility
Job Responsibility
  • Lead NPI and sustaining engineering activities on the mechanical side, from proto builds through volume ramp
  • Drive Design for Manufacturing (DFM) reviews for mechanical parts, enclosures, and cooling systems to ensure scalable and cost-effective builds
  • Partner with Suppliers, CMs, and ODMs to qualify new materials, processes, and tooling
  • Perform and quality control tolerance stack-up analysis, fit checks, and DOE studies for critical assemblies
  • Work with hardware and thermal teams to optimize mechanical design for cooling, reliability, and manufacturability
  • Own tooling, fixtures, and process validation for mechanical subassemblies and system integration
  • Review and influence Process FMEA and Design FMEA for mechanical systems
  • Develop, release, and maintain product documentation and manufacturing specifications
  • Provide leadership in complex issue resolution and supplier technical capability development
What we offer
What we offer
  • Competitive compensation packages, including generous equity packages
  • Comprehensive insurance coverage and other top-of-market benefits
  • Fulltime
Read More
Arrow Right

Senior Advanced Quality Engineer

ALSO is seeking a highly motivated Senior Advanced Quality Engineer (AQE) with a...
Location
Location
United States , Palo Alto
Salary
Salary:
165000.00 - 200000.00 USD / Year
ridealso.com Logo
ALSO
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering, Mechatronics, Industrial, Manufacturing, Materials Science, or a relevant technical field
  • 10+ years of relevant experience in Quality Engineering, R&D, or NPI in a hardware/manufacturing environment
  • Deep specialized knowledge in one or more of: Mechatronic/Vehicle: EV powertrain systems (motors, gearboxes) and processes like geartrain assembly, winding, magnetizing, and welding
  • Bike FATP: Metal parts manufacturing, bike alignment, wheel assembly, and Bike EOL testing
  • Fabrication: Metal or plastic parts manufacturing processes (e.g., die casting, extrusion, stamping, injection molding, forging, machining)
  • Expert ability to read and interpret complex mechanical drawings and GD&T
  • Deep knowledge of APQP and PPAP methodologies
  • Proficiency with Arena PLM (or similar), Jira, and Microsoft/Google suites
  • A self-starter with a process-oriented mindset, able to influence without authority and execute in an extremely fast-paced environment
Job Responsibility
Job Responsibility
  • Drive Upstream Quality: Partner deeply with Mechanical Design Engineers to engineer robustness into products, influencing architecture and driving 'Design for Manufacturability' (DFM) and 'Design for Assembly' (DFA) for mechanical systems
  • Risk Management: Lead precision execution of DFMEA (Design Failure Mode and Effects Analysis) for mechanical subsystems, defining critical-to-quality features and control plans
  • NPI Execution: Own the design quality process from start to finish, implementing Safe Launch Plans and Master Control Plans during the New Product Introduction (NPI) phase
  • Technical Problem Solving: Lead root cause investigations and failure analysis for mechanical failures in test or development environments
  • Cross-Functional Leadership: Act as the liaison between R&D in Palo Alto and overseas manufacturing partners, ensuring design intent is perfectly translated into production
What we offer
What we offer
  • Robust health coverage. Excellent health, dental and vision insurance covered up to 100% by ALSO with FSA & HSA options
  • One Medical membership and dedicated insurance advocates
  • Rich fertility and family building benefits with Progyny
  • Flexible time off
  • 401(k) match
  • Fulltime
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy