CrawlJobs Logo

Powerplant engineer

airbus.com Logo

Airbus

Location Icon

Location:
Spain , Getafe

Category Icon
Category:
IT - Software Development

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

A Powerplant Engineer is required to work in the design, development and implementation activities of the power plant for a major aircraft project. He / she will integrate in a multidisciplinary team supporting the development of a turbo-propeller aircraft.

Job Responsibility:

  • Integrate the engine, propeller, and rest of the systems into the Powerplant and within the aircraft
  • Ensure that the powerplant integration adequately includes all the aircraft requirements
  • Support in the definition of the adequate means of substantiation of the powerplant integration and perform the resulting tasks
  • Co-ordinate between the powerplant group and the rest of the aircraft disciplines to rationalise its integration in the aircraft
  • Propose, discuss and agree the physical and functional interfaces of the Powerplant internally and the rest of the aircraft
  • Ensure proper development and documentation of the integration activities
  • Provide advice of the implications and technical risks associated to the powerplant integration process
  • Participate in the powerplant integration related technical audits
  • Analyse the powerplant development, certification and qualification tests, as necessary, for evaluation of the integration and definition of modifications if needed
  • Analyse in-service anomalies, incidents and accidents related to the Powerplant, providing the necessary support for Continuous Airworthiness of in-service aircraft fleets
  • Analyse the potential customer requests and their impact in the Powerplant: compliance / non compliance and, if necessary, the corresponding modifications
  • Define and coordinate the integration of applicable Powerplant modifications resulting from either in service anomalies or new customer requirements

Requirements:

  • Aeronautical Engineer or equivalent (Master or similar)
  • Experience in Powerplant Integration activities is desirable covering, at least partially, one aircraft development cycle, preferably in turboprops
  • Experience in similar or related activities can be accepted as an alternative
  • Knowledge of the integration tools needed for Powerplant integration
  • English as working language: fluent in writing and conversation

Nice to have:

  • Experience in Powerplant Integration activities is desirable covering, at least partially, one aircraft development cycle, preferably in turboprops
  • Airbus Internship will be a plus
What we offer:
  • Vacation days plus additional days-off along the year
  • Attractive salary
  • Hybrid model of working when possible, promoting the work-life balance
  • Collective transport service in some sites
  • Benefits such as health insurance, employee stock options, retirement plan, or study grants
  • On-site facilities (among others): free canteen, kindergarten, medical office
  • Possibility to collaborate in different social and corporate social responsibility initiatives
  • Excellent upskilling opportunities and great development prospects in a multicultural environment
  • Special rates in products & benefits

Additional Information:

Job Posted:
February 13, 2026

Expiration:
February 20, 2026

Employment Type:
Fulltime
Work Type:
Hybrid work
Icon
Airbus - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Powerplant engineer

Powerplant Engineer

Ryanair are currently recruiting for a Powerplant Engineer to join Europe’s Larg...
Location
Location
Ireland , Dublin
Salary
Salary:
Not provided
ryanair.com Logo
Ryanair - Europe's Favourite Airline
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Relevant Engineering Degree or EASA Part 66 maintenance license
  • Minimum 1 years experience in a Technical Services / CAMO role or Engine MRO
  • Technical Knowledge of CFM56 and LEAP engines including workscope evaluation is an advantage
  • Understanding of EASA Part M, Part CAMO and Part 145 regulation
  • Flexible approach to work
  • Excellent communication skills with experience writing or reviewing technical instructions
  • Computer literate with strong working knowledge of MS Excel, MS Word and PowerPoint
  • Proven organizational skills with ability to manage multiple priorities at one time and make decisions in a busy, fast-paced environment
Job Responsibility
Job Responsibility
  • Liaising with CFM, Pratt & Whitney, Boeing, Airbus, Honeywell and other OEM’s on resolution of technical issues
  • Engine workscope and repair specification review and evaluation
  • Liaising with MRO partners to ensure on time delivery of engine repair/overhauls
  • Liaising with relevant stakeholders to ensure successful implementation of engine removal schedule
  • Review and implementation of Airworthiness Directives, Service Bulletins and other technical documentation
  • Identification and Implementation of solutions to reliability issues in conjunction with Reliability Department and OEMs
  • Delivery of technical reports and presentations
What we offer
What we offer
  • Competitive salary
  • Discounted and unlimited travel to over 230 destinations
  • Defined Contribution Pension Scheme
  • Death in Service Benefit – Up to 2 times of annual basic salary
  • 20 Days Annual Leave – Increasing to 22 days after 12 months and 25 days after 3 years of continuous service
  • Option for up to 5 additional unpaid leave days per year
  • Cycle 2 Work Scheme
  • Unrivalled career progression
  • Fulltime
Read More
Arrow Right

Experienced Airframe and Powerplant (A&P) Technician

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...
Location
Location
United States , Windsor Locks
Salary
Salary:
Not provided
bombardier.com Logo
Bombardier
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Valid and current FAA Airframe & Powerplant (A&P) license
  • Minimum of 3 years’ corporate aircraft experience
  • Ability to interpret and work with mechanical engineering drawings
  • Ability to effectively communicate in English both written and verbal form on individual and / or aircraft status
  • Own a basic set of hand tools with the ability to demonstrate inventory & control of tools
  • Must obtain appropriate Ground Support Equipment Qualifications, as required
  • Ability to work unscheduled overtime including nonscheduled workdays and holidays
  • Basic PC skills
  • Ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)
Job Responsibility
Job Responsibility
  • Troubleshoot, repair, inspect and perform maintenance on customer aircraft
  • Work directly with clients to help them find solutions
What we offer
What we offer
  • Competitive hourly rates & sign-on bonuses
  • Annual bonus opportunities
  • Paid overtime and shift premiums
  • Relocation assistance
  • Vacation, paid holidays & additional personal days off
  • Comprehensive benefits package (including 401K with Company contribution and match, medical, dental, vision & life insurance or cash in lieu of benefits)
  • Possibility of tuition reimbursement
  • Training & skills development opportunities
  • Insurance plans (Dental, medical, life insurance, disability, and more)
  • Competitive base salary
  • Fulltime
Read More
Arrow Right

Test Engineer for General Systems, Powerplant and Flight Control Systems

An opportunity for Test Prep., Realizat. & Result Analysis has arisen within Air...
Location
Location
Spain , Getafe
Salary
Salary:
Not provided
airbus.com Logo
Airbus
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Educated in an Aeronautical Engineering degree or a related discipline
  • Minimum 5 years of experience in testing
  • Proven experience in A/C Tests definition, preparation and execution for General Systems, FCS and Powerplant Systems
  • Proven experience in Configuration control and set up for tests
  • Proven experience in A/C tests and safety critical system tests for first flight
  • Proven experience in A/C prototypes testing
  • Proven experience in A/C or Systems configuration analysis and tests definition for the specific configuration
  • Proven experience in A/C Test means and Ground Support Equipment knowledge and operation
  • Proven experience in Test Support Systems, Flight Test Instrumentation definition and real time monitoring
  • Proven experience in Test results analysis and reporting
Job Responsibility
Job Responsibility
  • Support the department project coordinators and Test specialists to prepare, execute integration test on virtual environment, at lab/rig and ground test on the aircraft, support flight test execution and derive required reporting and data analysis
  • Support Test Specialist to prepare the contribution to the Integrated Test Team forum within the scope of the activities
  • Support for development, certification, qualification and production testing activities according to Test Program requirements
  • Ensure & support appropriate IV&V strategy for these activities
  • Follow-up of test progress
  • Participate in the review and optimization of Test Requests generating derived test procedures
  • Assure and review that the test means are in adequate configuration to perform the test
  • Control of configuration and limitations of the ATAs under his/her responsibility
  • Coordinate with ‘Test Framework and instrumentation’ and ‘A/C & Mission System Integration Rigs’ domains the definition of proper means for required data reduction, monitoring and analysis
  • Interface with DO, AW and certification authorities, supporting test activities on certification meetings when required, write Development/Certification/Qualification test plans and reports
What we offer
What we offer
  • Vacation days and additional days-off along the year
  • Attractive salary
  • Collective transport service in some sites
  • Benefits such as health insurance, employee stock options, retirement plan, or study grants
  • On-site facilities (among others): free canteen, kindergarten, medical office
  • Possibility to collaborate in different social and corporate social responsibility initiatives
  • Excellent upskilling opportunities and great development prospects in a multicultural environment
  • Special rates in products & benefits
  • Fulltime
Read More
Arrow Right

Structural Mechanical/Professional Engineer

The Structural Mechanical/Professional Engineer role utilizes expertise in Mecha...
Location
Location
United States , Orlando
Salary
Salary:
55.00 - 70.00 USD / Hour
apexsystems.com Logo
Apex Systems
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 5-7 years experience minimum relevant experience
  • BS degree in Powerplant, Civil, Industrial, or Mechanical Engineering or related field
  • Licensed Professional Engineer
  • Experienced in development of processes, procedures, and designs adhering to relevant industry standards (e.g., ISO 19650, relevant national BIM standards, ASME codes) and best practices within mechanical system design
  • Ability to interpret and work with mechanical system designs, BIM execution plans, 3D BIM models (e.g., AutoDesk REVIT), fabrication drawings, interface control documents, performance requirements specifications, and technical calculations
  • Experienced in mechanical system and BIM model creation and management (preferably with REVIT)
  • Experienced with performing and reporting structural analysis using FEA software and hand calculations
  • Awareness of risk management processes related to mechanical design, system integration, constructability, and operational efficiency
  • CANDIDATES MUST HOLD AN ACTIVE TOP SECRET SECURITY CLEARANCE OR HIGHER AND BE ABLE TO TRAVEL DOMESTICALLY AND INTERNATIONALLY
Job Responsibility
Job Responsibility
  • Conducts requirements analysis to elicit, document, and manage the functional, performance, and non-functional requirements of mechanical systems and their integration within the overall project, ensuring compatibility with BIM standards (ISO 19650, ISO16739-1, ISO 12006-2, ISO 23386, ISO 23387)
  • Develops and maintains detailed mechanical system designs and comprehensive BIM models
  • Applies mechanical system modeling to visualize, analyze, simulate (e.g., performance, clash detection), and optimize integration of mechanical designs, frames, and support structures
  • Identifies and assesses potential risks associated with the system design, fabrication, installation, integration, and performance, and proposes mitigation strategies
  • Contributes to the integration aspects of mechanical systems, including defining and managing interfaces with structural, electrical, plumbing, process, and control systems, utilizing BIM models for coordination and data exchange
  • Participates in verification and validation planning, defining the strategy and scope to ensure the integration of mechanical systems and structures meet all specified requirements, potentially using model-based checks and supporting physical test planning
  • Acts as a key liaison across disciplines (architectural, structural, mechanical, electrical), BIM managers, customers, vendors, and construction teams to resolve questions and ensure accurate interpretation and execution of the structure and BIM models
What we offer
What we offer
  • medical
  • dental
  • vision
  • life
  • disability
  • and other insurance plans
  • ESPP (employee stock purchase program)
  • 401K program with company match after 12 months
  • HSA (Health Savings Account on the HDHP plan)
  • SupportLinc Employee Assistance Program (EAP) with up to 8 free counseling sessions
Read More
Arrow Right

Technical Expert, Engineering, Propulsion, Fuel & Pneumatics Systems

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...
Location
Location
Canada , Mississauga
Salary
Salary:
Not provided
bombardier.com Logo
Bombardier
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor of Engineering Degree and eligibility for Professional Engineer registration
  • 10 to 15 years experience in aircraft Propulsion and/or Pneumatic systems (HP & LP Ducting, AMS, ECS, Pressurization, Powerplant, APU, FIDEEX, Fuel & FTIS)
  • Experience in providing engineering support to Final Assembly/Production Line
  • Conversant with design, qualification, and certification test requirements of Propulsion and/or Pneumatic systems
  • Familiar with Part 25 certification requirements and advisory material
  • Familiar with Microsoft Office software tools
  • Strong communication skills, ability to work well in a multi-disciplinary team environment
  • Strong integration skills, in both system partner management and system technical integration
  • Flexibility to travel and work outside normal hours
Job Responsibility
Job Responsibility
  • Support Global Aircraft (5500/6500/7500/8000) Propulsion, Fuel & Pneumatics Systems Engineering Team responsible for delivering highly effective and timely engineering support to the build and testing of the Production aircraft for HP & LP Ducting, AMS, ECS, Pressurization, Powerplant, APU, FIDEEX, Fuel & FTIS
  • Provide timely engineering-guided support for root cause identification of systems engineering issues encountered during system installation, ground & flight Functional Testing Procedures
  • Witness system functional testing and conduct technical-engineering investigations on Propulsion and Pneumatic systems related issues, analyze and develop solutions/recommendations and reports
  • Provide engineering disposition to RFCs, RNCs, and Supplement 2s
  • Review functional test engineering requirements and ensure translation into mature functional tests
  • Interface with internal and external stakeholders to support technical engineering investigations and define required engineering design changes
  • Track and ensure successful implementation of systems installations and modifications
  • Work with the product team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes
  • Develop good working relationships with various departments within BA and with suppliers
What we offer
What we offer
  • Insurance plans (Dental, medical, life insurance, disability, and more)
  • Competitive base salary
  • Retirement savings plan
  • Employee Assistance Program
  • Tele Health Program
  • Fulltime
Read More
Arrow Right

Mechanical Aircraft Maintenance Engineer

Our client is looking for a talented Mechanical Aircraft Maintenance Engineer (M...
Location
Location
Canada , Oro-Station
Salary
Salary:
Not provided
jmc-aviation.com Logo
JMC Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Valid M2 AME License recognized by Transport Canada
  • Proven experience maintaining Q400 aircraft
  • Strong troubleshooting abilities with hydraulics, landing gear, engines, and systems
  • Must provide own basic tools
  • Legally eligible to work in Canada
  • Willing to work rotating shifts, overtime, and weekends when required
Job Responsibility
Job Responsibility
  • Perform line and base maintenance on Dash 8 / Q400 fleet
  • Troubleshoot and repair mechanical, hydraulic, and powerplant systems
  • Conduct scheduled inspections, component replacements, and defect rectifications
  • Carry out engine runs, gear swings, and operational performance checks (as qualified)
  • Review and interpret AMMs, service bulletins, and engineering orders
  • Certify completed work within licensing privileges
  • Maintain detailed maintenance documentation and technical records
  • Comply with safety, quality assurance standards, and SMS programs
  • Support hangar heavy checks when required
  • Coordinate with avionics and structures personnel for efficient workflow
Read More
Arrow Right

Testing Technician

Reliably set-up and perform gas stand, engine dynamometer, special testing, and ...
Location
Location
United States , Arden
Salary
Salary:
46400.00 - 65250.00 USD / Year
borgwarner.com Logo
BorgWarner
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associate’s degree in an engineering related field is preferred or related education and experience in an automotive technical field or certification from an Airframe and Powerplant technical school
  • Equivalent mechanical powertrain experience in the automotive industry (in-depth engine work including tear down, reassembly, measurement, and dynamometer testing) if coupled with a minimum of 2 years of relevant R&D or technical lab testing experience
  • Experience in general machining and fabrication, including basic welding
  • Experience in professional automotive components test environment (powertrain systems, lab or R&D) is desired
  • Demonstrated mechanical aptitude is a must
  • Must be proficient in reading and interpreting mechanical and engineering drawings
  • Experienced and knowledgeable in the proper use of indicators, micrometers and dial calipers and other related equipment
  • Ability to carry out assigned tasks with minimal supervision, and complete task in a timely manner
  • Must be able to demonstrate Basic Computer literacy including the ability to use lab related software as well as Microsoft Office applications (Outlook, Excel, Word, PowerPoint, Teams, Edge)
  • Must be able and willing to attend courses related to specific test protocols
Job Responsibility
Job Responsibility
  • Reliably set-up and perform gas stand, engine dynamometer, special testing, and other benchwork
  • Complete engineering reports, present data to Engineering, as well as other lab duties
  • Read and understand instructions and secure the necessary procedure(s), work instruction(s), or specification(s) to complete Engineering/Customer requests (GEMS Tickets)
  • Reads engineering prints and can measure hardware utilizing the proper measurement tools and techniques
  • Measures and assembles hardware prior to testing
  • Performs setup of gas and engine stands and changeover of hardware for the next test sequence using correct adapters and connections for testing per specification(s)
  • Independently operates gas stands, engine dynamometers, and other special testing equipment, observes, and immediately interprets data and reacts accordingly
  • Performs system-level performance, sub-system level, and component qualification testing on gas stands
  • Performs gas stand functional and durability testing on gas stands
  • Performs engine durability testing, which includes installation of engine and dynamometer, dynamometer and engine installation checks, as well as writing and editing test schedules
What we offer
What we offer
  • Day 1 Medical Coverage with potential of no monthly premium
  • Onsite Health Clinic for employees and dependents (age 14 and over) at no cost
  • Dental, Vision, Life, AD&D, and Disability Coverage
  • Tuition Reimbursement Program after 18 months
  • Retirement Savings Plan (401k) with a matching program
  • Company paid holidays and vacation starting Day 1
  • Fulltime
Read More
Arrow Right

Lead Technician, Airframe & Powerplant (A&P)

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...
Location
Location
United States , Windsor Locks
Salary
Salary:
Not provided
bombardier.com Logo
Bombardier
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Typically, a minimum of 5 years aircraft maintenance work experience or substantiated equivalent experience
  • Typically, a minimum of 1 year corporate / commercial jet experience
  • Current, and valid, FAA Airframe and Powerplant (A&P) Certificate
  • Basic PC skills
  • Ability to interpret and work with mechanical engineering drawings
  • Ability to effectively communicate in both written and verbal form on individual and / or aircraft status
  • Own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
  • Must obtain appropriate Ground Support Equipment Qualifications as required
  • Ability to work unscheduled overtime including nonscheduled workdays and holidays
  • Ability to work in seasonal/inclement weather outside
Job Responsibility
Job Responsibility
  • Perform complex repairs on aircraft systems
  • Assist in creation of service orders with SAP or applicable operating systems
  • May assist in complete engine and / or APU runs, as required
  • Provide time estimates
  • Train, coach and support other employees
  • May perform Delegated Inspector (DI) function as qualified by QA
What we offer
What we offer
  • Insurance plans (Dental, medical, life insurance, disability, and more)
  • Competitive base salary
  • Retirement savings plan
  • Employee Assistance Program
  • Tele Health Program
  • Fulltime
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy