PCB Layout Engineer Job at Etched (San Jose)

PCB Layout Engineer

Designs, analyzes, develops, modifies and evaluates electrical/electronic parts,...

Location

United States , Aguadilla

Salary:

Not provided

Hewlett Packard Enterprise

Expiration Date

Until further notice

Requirements

Bachelor's or Master's degree in Electrical Engineering
Typically 2-4 years experience
Strong understanding of PCB materials, stack-up formulas, and design trade-offs (e.g., schedule, cost, risk, and DfX)
Ability to develop balanced layout solutions using systematic and data-driven approaches
Experience in high-speed signal layout, stack-up analysis, and routing optimization
Effective communication skills in English, both written and verbal
Using electrical design tools and software packages
Ability to apply analytical and problem solving skills
Designing electronic components, integrated circuitry, and algorithms
Using empirical analysis, modeling and testing methodologies to validate component, circuit, and hardware designs and thermal/emissions management

Job Responsibility

Lead layout floor planning and define component pinouts and fan-out strategies
Assess and optimize layer stack-up and routing for performance, cost, and manufacturability
Design and optimize high-speed bus layouts and PCB trace routing
Translate research and best practices into design guidelines and specifications
Collaborate with cross-functional teams to manage risk, prioritize design decisions, and ensure consistent design quality across platforms
Designs portions of engineering solutions for electrical and electronic parts, subsystems, integrated circuitry, and algorithms based on established engineering principles and in accordance with development technology practices and guidelines
Develops and implements parameters and test plans for existing designs, including validation of tolerances, form/fit/function, shock and vibration, electromagnetic interference, safety, reliability, thermal generation, and system power measurements
Collaborates and communicates with internal and outsourced development partners on electrical hardware design and development
Participates as a member of project team of other electrical hardware engineers and internal and outsourced development partners to develop reliable, cost effective and high quality solutions for low to moderately-complex products.

What we offer

Health & Wellbeing
Personal & Professional Development
Unconditional Inclusion

Fulltime

Hardware Engineer Staff - Power Design

Designs, analyzes, develops, modifies and evaluates electrical/electronic parts,...

Location

India , Bangalore

Salary:

Not provided

Hewlett Packard Enterprise

Expiration Date

Until further notice

Requirements

10+ years related Power Design Engineering experience
Solid experience with schematic capture and simulation tools (including SPICE) is essential
practical background with PCB Layout tools and techniques
familiarity with power development CAD tools such as Cadence Sigrity PowerDC also important
Working knowledge of communication interfaces such as I2C/PMBus as well as firmware design experience are highly desirable
Extensive experience with both basic and power related Electronic Lab Equipment and test methods is required
BSEE degree minimum and MSEE degree will be a plus
Strong communication skills, both verbal and written, are an important requirement for this position

Job Responsibility

Definition of design requirements
selection of critical components
design/simulation/schematic capture of power circuit blocks and coordination with the Board Level and PCB Layout Engineers
subsequent bring-up and characterization testing of the completed prototype design and introduction to manufacturing
system-level conceptualization
power supply module functional specification and full cycle of engineering development with Juniper Supplier(s) including prototype testing
system integration
documentation and manufacturing support
mentoring less experienced members of the power engineering team
developing new technology initiatives within the group

What we offer

Comprehensive suite of benefits that supports physical, financial and emotional wellbeing
programs catered to helping you reach career goals
unconditional inclusion in workplace
flexibility to manage work and personal needs

Fulltime

Radio Frequency (RF) Design Engineer

Silvus Technologies is seeking an RF Design Engineer who will report to the Dire...

Location

United States , San Diego

Salary:

100000.00 - 150000.00 USD / Year

Silvus Technologies (International)

Expiration Date

Until further notice

Requirements

Bachelors of Science degree (or higher) in Electrical Engineering
Minimum 2 years of multi-GHz RF hardware development experience
Good working knowledge of RF board layout, fabrication, and packaging
Hands-on experience with solving EMI, harmonics, spurious, and stability issues
Experience using RF simulation tools (i.e. AWR Microwave Office, Altium)
Must be a U.S. Person (permanent resident or citizen) due to U.S. government contracts
Employment is contingent upon the successful clearance of a background check

Job Responsibility

Antenna to baseband RF subsystem design using discrete circuitry or highly integrated RFICs
Discrete design includes PLL, LNA, Mixers, PA etc
Implementing or supervising schematic capture and PCB layout
RF performance characterization, tuning, and troubleshooting
Overall system design to ensure good EMI performance
Ensure circuit board design and overall radio product can pass emission and immunity regulations
Troubleshoot RF-related production yield problems
Improve design for manufacturability
Rare local travel to other company locations, as required (i.e. Irvine, West LA)

Fulltime

Senior Radio Frequency (RF) Design Engineer

Silvus Technologies is seeking a Senior RF Design Engineer who will report to th...

Location

United States , San Diego

Salary:

140000.00 - 190000.00 USD / Year

Silvus Technologies (International)

Expiration Date

Until further notice

Requirements

Bachelors of Science degree (or higher) in Electrical Engineering
Minimum 5 years of multi-GHz RF hardware development experience
Good working knowledge of RF board layout, fabrication, and packaging
Hands-on experience with solving EMI, harmonics, spurious, and stability issues
Experience using RF simulation tools (i.e. AWR Microwave Office, Altium)
Must be a U.S. Person (permanent resident or citizen) due to U.S. government contracts
Employment is contingent upon the successful clearance of a background check

Job Responsibility

Antenna to baseband RF subsystem design using discrete circuitry or highly integrated RFICs
Discrete design includes PLL, LNA, Mixers, PA etc
Implementing or supervising schematic capture and PCB layout
RF performance characterization, tuning, and troubleshooting
Overall system design to ensure good EMI performance
Ensure circuit board design and overall radio product can pass emission and immunity regulations
Troubleshoot RF-related production yield problems
Improve design for manufacturability
Rare local travel, as required by Silvus (i.e. Irvine, West LA)

Fulltime

R&D Hardware Engineer

Early career electrical/electronic engineer will design, analyze and develop sys...

Location

United States , Roseville

Salary:

60800.00 - 140400.00 USD / Year

Hewlett Packard Enterprise

Expiration Date

Until further notice

Requirements

BS or MS in Electrical/Electronic Engineering or Computer Engineering
Experience with schematic capture and PCB layout tools
Fundamental understanding of instrumentation and probing theory and practice
Practical experience with oscilloscopes, network analyzers and measurement techniques
Understanding of components, signals and circuits through means of bode plots and impedance measurements
Experience with Python or other scripting languages

Job Responsibility

Digital circuit design and analysis for new and existing high speed ethernet switches
Schematic capture and PCB layout of new designs and modification of existing designs
Development, planning and execution of test plans including electrical and functional verification of new designs
Support extended teams (software, manufacturing, test) in bring-up, validation and product introduction

What we offer

Health & Wellbeing
Personal & Professional Development
Unconditional Inclusion

Fulltime

Electrical Engineer II, Video Products - Sustaining

As a member of the Video Electrical Engineering Sustaining team, you will be res...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering or similar engineering discipline
Minimum 5 years of industry electronics design or electronics sustaining experience with mass-produced high-speed, high-density, portable, battery-powered devices, and/or low-power vehicular embedded electronics products
Proficient with identifying and implementing alternate source electronic component solutions and/or circuit design changes necessary to address design improvement, obsolescence, supply chain easement, etc, of released mass production electronics
Proficiency with general process of making design changes to Bills of Material (BOMs), schematics, layouts as needed for change requests
Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDO, other regulators), applications processors/microcontrollers, high speed memory subsystems (LPDDRx, eMMC), high- and low- speed communications interfaces (USB, Ethernet, I2C, SPI), audio components (digital and analog MEMs mics), RF subsystem components (Wifi, BT, LTE, GNSS), sensor systems, protection circuitry (ESD, voltage and current limiting components), SMT connectors, batteries and battery packs, PCBAs, Flex PCBAs, etc
Experience with High Speed circuit design and test (eg. USB3.x, Ethernet, RF, DDRx, etc)
Basic experience with RF integration and test (eg. Bluetooth, BLE, Wifi, GNSS, Cellular)
Strong hands-on proficiency with electronics characterization, verification, debug, and failure analysis using laboratory tools: Oscilloscope, power supplies, multimeters, custom jigs, spectrum analyzer, etc
Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired

Job Responsibility

Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics
Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
Execute bench verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc
Perform debug, failure analysis, and rework of electronics systems, circuits, and components
Using OrCAD Schematic tools, improve or modify embedded high-density, high-speed mixed-signal electronic circuits that integrate a wide array of electronics: application processors, microcontrollers, image sensors, high- and low-speed data interfaces, high-speed memory, switch-mode and linear power supplies, batteries, audio subsystems, RF transceivers, discrete digital and analog components, PCBs and Flexible PCBs, and a lot more
Team with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro or other layout tools
Test and evaluate basic RF performance of wireless circuitry (Cellular, Wifi, Bluetooth, GNSS, etc) in assigned in-market products
Map out test methods, perform system and component verification testing, and drive test plans for evaluating electronics design changes
Assess and document design change outcomes, test results, and related information and present information to design teams and management
Provide hardware support (sample preparation, documentation, debug) to the global regulatory compliance team for product certifications (FCC, IC, CE, PTCRB, etc)

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs

Fulltime

Sr. Electrical Engineer, Sustaining

As a member of the TASER Electrical Engineering Sustaining team, you will be res...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering or similar engineering discipline
Six years of industry experience in electronics design and sustaining for mass-produced, handheld, embedded, battery-powered consumer devices
Expertise in identifying and implementing alternative electronic components or circuit design modifications to enhance performance, address obsolescence, and optimize supply chain efficiency for released mass-production electronics
Proficient in executing design changes across bill of materials, schematics, and layouts to support identified product changes/updates
Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDOs), microcontrollers, memory subsystems (FLASH, EEPROM), switches, connectors, communication interfaces (SPI, UART, I2C), indication LEDs, displays, LASERs, electromechanical transducers, hall effect sensors, inertial measurement units, accelerometers, protection circuitry (ESD, voltage, and current limiting components), discrete resistors/capacitors/inductors, rechargeable batteries and charging/balancing circuitry, RF subsystems (BLE, WiFi) for flex, rigid, and rigid-flex PCB designs
Strong hands-on expertise in electronics verification, characterization, and failure analysis, utilizing lab equipment such as oscilloscopes, power supplies, multimeters, custom test jigs and software related tools
Experience collaborating with laboratory technicians on circuit and component rework. Skilled in coordinating or performing component replacement and rework
hands-on soldering skills are a strong plus. Knowledgeable in rework processes, with the ability to execute directly or manage internal and external rework activities
Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired

Job Responsibility

Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics associated with TASER devices and accessories
Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
Execute bench-level verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, power supplies, multimeters, logic analyzers, and custom related test equipment and software tools
Perform debugging, failure analysis, and rework of electronic systems, circuits, and components to identify and confirm root cause of issues associated with updated design changes or RMA returns. This includes close collaboration with the failure analysis team to conduct CT scans on suspect assemblies and the use of functional circuit testers in production to validate final issue resolution
Using OrCAD schematic design tools, improve or modify embedded mixed-signal electronic circuitry that integrates high voltage power supply circuitry, microcontrollers, flashlight/indication/display/LASER circuitry and drivers, memory devices (FLASH/EEPROM), switch-mode and linear power supplies, batteries, high-speed and low-speed data interfaces, electromechanical transducers, and other discrete digital and analog components for flex, rigid, and rigid-flex PCB designs
Partner with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro and other layout tools
Develop test methods, execute system and component-level verification, and lead test planning efforts to evaluate electronics design changes
Team with validation and other engineering teams to evaluate and document design update outcomes, test results, and related information, then present findings to management for review and further action
Update and help to finalize assembly drawings, bill of materials, Geber files, and other design documentation needed to support updated design change releases
Knowledge sharing, mentoring, and close collaboration with other team members and departments

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs
snacks in our offices

Fulltime

Senior Electrical Engineer, Video

As a Senior Member of Axon's Video Electrical Engineering team, you will lead th...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering or similar engineering discipline
7+ years of industry embedded electronics design experience with a major focus on designing high-speed, high-density, portable, battery-powered devices, robotics, or low-power vehicular embedded circuits
Creative and passionate about innovative design and cutting-edge technology
Demonstrated ownership of embedded electronics design across multiple subsystems
Skilled in high-speed, high-density hardware design, including system architecture development, component selection, schematic design, PCB layout management, design verification testing and debug
Proficient leading electronics design and development from concept to mass production
Experience with technical oversight of design partners, ODMs, and JDMs leading to successful electronics design
Strong proficiency with point of load power supply design (Switch mode, linear regulators), PMIC integration, power tree development, and power consumption analysis
Experience with Lithium batteries and battery charging circuit design
Experience with RF transceiver integration including LTE, Wi-Fi, and GNSS

Job Responsibility

Own the design of critical electronic circuits and systems
Collaborate globally with cross-functional engineering teams to deliver world-class products
Mentor and inspire junior engineers, fostering technical growth across the team
Research, propose, and develop innovative, industry leading circuit designs for Axon’s future-generation video products, wired and wireless devices, and/or low power accessories
Lead project team EE’s and design partners, joining forces to achieve successful completion of hardware objectives
Use OrCAD to create embedded mixed-signal circuit schematics, integrating components like application processors, image sensors, high speed memory, high speed digital communication buses, RF transceivers, power supplies, battery charging systems, and more
Partner with PCB Design engineers to define, review, and optimize printed circuit board layout designs using Allegro or other layout tools
Bring up, characterize, optimize, and debug systems and circuits using lab tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc
Team up with RF Engineers to integrate and validate critical RF circuitry for wirelessly connected devices
Assess design outcomes, test results, and related information and present findings to design team and management

What we offer

Competitive salary and 401K with employer match
Paid time off at your discretion
Robust parental leave policy
An award-winning office/working environment
Ride along with police officers to see them use our technology and get inspired

Fulltime

PCB Layout Engineer

Etched

Location:
United States , San Jose

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
February 18, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for PCB Layout Engineer

PCB Layout Engineer

Hardware Engineer Staff - Power Design

Radio Frequency (RF) Design Engineer

Senior Radio Frequency (RF) Design Engineer

R&D Hardware Engineer

Electrical Engineer II, Video Products - Sustaining

Sr. Electrical Engineer, Sustaining

Senior Electrical Engineer, Video

PCB Layout Engineer

Etched

Location:United States , San Jose

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:February 18, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for PCB Layout Engineer

PCB Layout Engineer

Hardware Engineer Staff - Power Design

Radio Frequency (RF) Design Engineer

Senior Radio Frequency (RF) Design Engineer

R&D Hardware Engineer

Electrical Engineer II, Video Products - Sustaining

Sr. Electrical Engineer, Sustaining

Senior Electrical Engineer, Video

Location:
United States , San Jose

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
February 18, 2026