CrawlJobs Logo

Operations & Maintenance Technician

crusoe.ai Logo

Crusoe

Location Icon

Location:
United States , Abilene

Category Icon
Category:

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

33.00 - 38.00 USD / Hour

Job Description:

Crusoe is seeking a dedicated Operations & Maintenance Technician (OMT) to ensure the proper operation and maintenance of our power facility. This role is essential for maintaining plant reliability, safety, and environmental compliance, whether assigned to a shift or the maintenance team. You will be responsible for operating, troubleshooting, and repairing a wide range of mechanical, electrical, and instrumentation equipment critical to our mission.

Job Responsibility:

  • Operate and maintain a Combined Cycle power generating facility and its auxiliary equipment, including heat recovery steam generators (HRSG), air compressors, and fire suppression systems with minimal guidance
  • Identify and resolve CEMS problems, perform Root Cause Analysis of failures, and repair defective plant equipment such as pumps, valves, and gearboxes
  • Conduct "Inspection of Watch" on all plant systems and read meters or automatic devices to record temperatures, vibrations, fluid levels, and water chemistry to verify operating conditions
  • Perform analysis on HRSG, auxiliary boiler, and cooling tower systems
  • control chemical feed and blowdown rates to maintain proper control ranges
  • Open and close circuit breakers for system operation or electrical isolation, and perform piping and conduit installation for plant upgrades
  • Utilize the facility’s computerized maintenance management system (CMMS) and assist with the development of Operations and Maintenance procedures
  • Coordinate with vendors for chemical ordering and equipment repair, work with Plant Management on capital projects, and assist in administering the Operator training program
  • Perform general housekeeping, painting, and continuous improvement tasks to maintain the appearance and cleanliness of the plant and control room.

Requirements:

  • High School diploma or equivalent is required
  • Demonstrable knowledge of all facets of power plant operations and the ability to make competent decisions in emergency situations
  • Ability to read and interpret mechanical drawings, electrical one-lines, logic drawings, technical manuals, and P&IDs
  • Proficiency in troubleshooting mechanical, instrumentation, and electrical equipment, as well as operating welding and cutting equipment
  • Good verbal and written communication skills and proficiency in Microsoft Office, specifically Excel and Word
  • Ability to walk, reach, climb, and lift up to 50 pounds
  • Willingness to work 12-hour rotating shifts and availability for call-ins or work overload as needed
  • Must be authorized to work in the USA
  • This position is designated a safety-sensitive position and/or is located in a safety-sensitive facility. Drug and alcohol program participation is required.

Nice to have:

  • Associates Degree (AA) or equivalent from a two-year college or technical school
  • Two to four years of related power plant experience and/or training
  • Experience operating heavy equipment such as man lifts and forklifts
  • Advanced proficiency in Water Chemistry and demineralized water system operations.
What we offer:
  • Restricted Stock Units in a fast growing, well-funded technology company
  • Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents
  • Employer contributions to HSA accounts
  • Paid Parental Leave
  • Paid life insurance, short-term and long-term disability
  • Teladoc
  • 401(k) with a 100% match up to 4% of salary
  • Generous paid time off and holiday schedule
  • Cell phone reimbursement
  • Tuition reimbursement
  • Subscription to the Calm app
  • MetLife Legal
  • Company paid commuter benefit
  • $300/month

Additional Information:

Job Posted:
January 19, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Job Link Share:

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Operations & Maintenance Technician

Operations Technician

This employee will conduct daily maintenance of the buildings and equipment at t...
Location
Location
United States , Winamac
Salary
Salary:
Not provided
kokomograin.com Logo
Kokomo Grain Co Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Education or equivalent
  • Good people-orientation skills
  • Prior experience working in a grain facility is preferred
  • Demonstrated ability to work in a team environment
  • Comfortable working at heights
  • Able to lift up to 75 pounds
  • Comfortable climbing fixed and stationary ladders
  • Able to shovel as needed
  • Ability to work in confined spaces and in a broad range of climate conditions
  • Comfortable utilizing mobile and stationary equipment and systems
Job Responsibility
Job Responsibility
  • Conduct daily maintenance of the buildings and equipment
  • Manage the flow of grain dumped into the elevator and loaded out into trucks (and rail cars)
  • Monitor grain in storage and maintain condition with aeration or turning
  • Oversee the weighing and grading of grain before it is dumped
  • Perform all duties in a safe environmentally compliant manner
  • Ensure grain facilities are well maintained by adhering to a strict maintenance schedule
  • Repair and rebuild equipment
  • Clean and prepare storage facilities including grain bins and ground piles
  • Load trains when shipping grain to a customer facility (if at a rail loading facility)
  • Visually monitor grain and grain products for irregularities
  • Fulltime
Read More
Arrow Right

Operations Field Technician

Join Powerdot and be on the frontlines of Europe’s electric mobility revolution!...
Location
Location
Portugal , Lisbon
Salary
Salary:
Not provided
powerdot.eu Logo
Powerdot
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Passion for technology and problem-solving
  • Independence, flexibility, and quick thinking
  • Strong communication skills with clients, suppliers and teams
  • Technical curiosity: Enthusiastic about learning how electrical and electronic systems work, with a strong desire to build hands-on troubleshooting and maintenance skills
  • Proactive and reliable: Takes initiative, manages time effectively, and assumes commitments with responsibility
  • Adaptable: Quick to learn new technologies, tools, and procedures in a fast-evolving industry
  • Problem-solver in training: Approaches challenges with curiosity and persistence, eager to find practical, lasting solutions
  • Strong communicator: Listens carefully, asks questions, and communicates clearly with teammates, clients, and mentors
  • Customer-focused: Understands the importance of delivering a smooth, reliable charging experience and takes pride in representing the Powerdot brand professionally
Job Responsibility
Job Responsibility
  • Perform corrective and preventive maintenance and troubleshooting on chargers
  • Respond quickly to alerts and fix issues on-site
  • Plan your daily routes and manage your territory
  • Stay ahead of evolving charger technology and firmware updates
What we offer
What we offer
  • Private health insurance coverage
  • Gym membership to help you stay active
  • Flexible working hours: you own your time
  • Annual offsite where we celebrate the year’s achievements and spend quality time together
  • Company Car – Work Tool
  • Regular team-building events with your local teammates
  • English Training as English is our language used to connect with all markets and teams
  • Free office snacks and unlimited coffee & Meal allowance for every worked day
  • Special discounts for charging your electric vehicle
Read More
Arrow Right

Industrial Maintenance Technician

Cargill’s Agricultural Supply Chain (CASC) connects producers and users of grain...
Location
Location
United States , Wichita
Salary
Salary:
29.81 USD / Hour
cargill.com Logo
Cargill
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Must be eligible to work in the United States without visa sponsorship
  • Must be 18 years or older
  • Ability to understand and communicate in English (verbal/written)
  • Ability to perform physical job duties which may include bending, lifting up to 50lbs, kneeling, climbing, crawling, and twisting, with or without reasonable accommodation
  • Ability to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of personal protective equipment (PPE) including a respirator
  • Basic computer skills
  • Ability to work in elevated areas (4 feet and above)
  • Ability to work in confined spaces
  • Basic math skills including addition, subtraction, multiplication, and division
  • Ability to work overtime including weekends, holidays, or different shifts with advance notice
Job Responsibility
Job Responsibility
  • Completing preventative, predictive, reactive, and precision industrial maintenance throughout the facility
  • Documenting all completed work and the conditions found, utilizing maintenance computer software as necessary
  • Installing, maintaining, testing, evaluating, and repairing various components and systems including conveyors, fans, pumps, belt and chain drives, and process machinery
  • Operating forklifts, scissor lifts, and aerial work platforms
  • Interacting on a regular basis with peers and management
  • Operating standard maintenance tools such as power tools, basic hand tools, pneumatic tools, electric tools, as well as lifting/rigging equipment
  • Understanding and adhering to all safety policies and procedures
  • Maintaining a safe and clean work environment
  • Other duties as assigned
What we offer
What we offer
  • Medical, Dental, Vision, and Prescription Drug Insurance
  • Health and Wellness Incentives
  • Paid Vacation and Holidays
  • 401(k) with Cargill matching contributions
  • Flexible Spending Accounts (FSAs)
  • Short-Term Disability and Life Insurance
  • Employee Assistance Program (EAP)
  • Tuition Reimbursement
  • Employee Discounts
  • Fulltime
Read More
Arrow Right

Service & Maintenance Technician

Maintains store operations by maintaining and repairing Convenience Store equipm...
Location
Location
United States of America , Orange Park, FL
Salary
Salary:
Not provided
https://www.circlek.com Logo
Circle K
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Maintains store operations by maintaining and repairing Convenience Store equipment
  • performs preventive maintenance
  • performs general maintenance work in stores
  • troubleshoots, repairs, cleans and maintains store equipment
  • performs preventive maintenance on gas equipment
  • contacts service vendors for materials
  • complies with procedures, rules and regulations
  • performs light electrical, plumbing, carpentry and roofing
  • diagnoses, repairs and maintains Food and Drink Equipment
  • documents and communicates actions, irregularities and continuing needs
Job Responsibility
Job Responsibility
  • Maintains store operations by maintaining and repairing Convenience Store equipment
  • performs preventive maintenance
  • performs general maintenance work in stores
  • troubleshoots, repairs, cleans and maintains store equipment
  • performs preventive maintenance on gas equipment
  • contacts service vendors for materials
  • complies with procedures, rules and regulations
  • performs light electrical, plumbing, carpentry and roofing
  • diagnoses, repairs and maintains Food and Drink Equipment
  • documents and communicates actions, irregularities and continuing needs
  • Fulltime
Read More
Arrow Right

Maintenance Technician

Manage the preventative and predictive maintenance to improve the functionality ...
Location
Location
United States , Denver
Salary
Salary:
39.35 - 50.63 USD / Hour
purina.com Logo
Nestlé Purina
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 1+ years’ electrical maintenance experience in a manufacturing, industrial, technical, military, or related environment
  • 2 Year Technical Degree
  • Must be willing to work all shifts including nights and weekends
Job Responsibility
Job Responsibility
  • Troubleshoot and perform preventative maintenance and repairs on general plant electrical equipment such as starters, start/stop stations, motors (up to 480V)
  • Service and repair of production related electrical equipment including knowledge of power distribution and lighting systems, AC/DC motors and transformers, machine and line control devices, fluid control and distribution, electronic controls and instrumentation, variable frequency drives, and basic PLC knowledge/ interpretation capabilities
  • Ability to demonstrate safe practices and tools for while working with low voltage and medium voltage electrical systems and components
  • Operate & maintain shop tools and equipment, such as pipe threader and band saw
  • Demonstrate good working knowledge of electrical diagrams and/or circuits and utilize during troubleshooting
  • Must have a working knowledge of basic electrical test apparatus such as multimeters and megohmmeters
  • Use proper equipment to test, repair, & verify various forms of digital & analog signals
What we offer
What we offer
  • 401k with company match
  • healthcare coverage
  • competitive total rewards package
  • performance-based incentives
  • Fulltime
Read More
Arrow Right

Onsite Maintenance Technician

Are you a skilled and dedicated maintenance professional looking to make a tangi...
Location
Location
United States , Longboat Key
Salary
Salary:
Not provided
associaonline.com Logo
Associa
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Must be able to communicate effectively with internal and external customers and clients
  • Knowledge of general maintenance requirements, (documentation, safety, required reporting, regulations, etc.)
  • Knowledge of electrical and plumbing codes and maintenance requirements, (documentation, safety, required reporting, regulations, etc.)
  • Knowledge of OSHA worksite and personal safety requirements
  • Knowledge of State or local governmental safety requirements
  • Required to provide own basic tools (power drill, power saw, screwdrivers, level, hammer, etc.)
  • Ability to safely operate, climb and perform work on ladders (1-2 stories) – 24-28ft
  • Ability to operate smartphone & email (day-to-day operations, basic communication/monthly expense reports)
  • Must be able to operate a vehicle from one location to another, have a valid FL driver's license with a clean driving record
  • Must be able to lift and carry up to 20 pounds on a frequent basis
Job Responsibility
Job Responsibility
  • Perform routine preventive maintenance to ensure that building systems operate efficiently and that the physical condition of buildings do not deteriorate
  • Perform maintenance tasks such as carpentry, painting, plumbing and electrical repairs to ensure that the building is properly maintained
  • Clean and repair building fixtures including lights, locks, windows, doors, screens, walls, floors, gutters and drains
  • Operate and perform routine maintenance and repairs on systems & equipment as needed
  • Fulltime
Read More
Arrow Right

Maintenance Technician

As a Maintenance Technician, you will be part of the Manufacturing Make Asset Ma...
Location
Location
Netherlands , Leiden
Salary
Salary:
4000.00 EUR / Month
https://www.randstad.com Logo
Randstad
Expiration Date
March 10, 2027
Flip Icon
Requirements
Requirements
  • You have MLO All-round technician in a relevant area
  • instrumentation, electrical, or mechanical or equivalent vocational
  • Experience in a highly GMP regulated pharmaceutical industry is a plus
  • You have work experience as a technician or similar (breakdown technician experience is an advantage)
  • Experience in solving technical malfunctions
  • You have good written and oral communication skills in English/Dutch
  • Knowledge/possession of VCA and NEN3140 or other equivalent EHS and electrical safety training from another country is required
  • A valid driver's licence (B) is required.
Job Responsibility
Job Responsibility
  • Ensuring the smooth operation of the production and utility assets at Leiden and Sassenheim sites by responding to and resolving technical malfunctions
  • Maintaining a variety of equipment, including utility systems, laboratories, and complex biotechnological production systems
  • Troubleshooting issues across mechanical, electrical, and instrumentation systems
  • Performing work in accordance with GMP guidelines.
What we offer
What we offer
  • Shift allowance of 28%
  • Career-growth opportunities
  • A diverse work-environment
  • Easily accessibly by both car and train
  • A 5-week shift (3-4-3)
  • An international employer
  • 5.5% ADV allowance on top of your salary
  • A direct contract with Johnson & Johnson is a possibility.
  • Fulltime
Read More
Arrow Right

Maintenance Technician

The Maintenance Technician III will have the ability to lead other service techn...
Location
Location
United States , Fort Mill
Salary
Salary:
30.00 USD / Hour
owenscorning.com Logo
Owens Corning
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or equivalent
  • Two year Technical Mechtonics degree preferred
  • Six years experience in an industrial manufacturing environment as a maintenance technician
  • Must be able to read, write, speak and understand English
  • Must be able to comply with the Meritor Drug and Alcohol policy
  • Intermediate computer knowledge, at an intermediate level in working with Microsoft Windows to include: Outlook, Word, and Excel
  • Ability to work all days and shifts, including overtime (10 hours a day, 4 days a week operation, including holidays)
  • Ability to work under pressure with time constraints
Job Responsibility
Job Responsibility
  • Lead other service technicians
  • Design solutions for difficult problems
  • Manage outside contractors
  • Be on call for emergencies
  • Handle multiple projects and daily activities
  • Meet time lines
  • Develop plans on how to accomplish departmental and operation goals
  • Perform all duties (repair, corrective, projects and PM’s) in an urgent, but safe manner
  • Develop and recommend changes to proactive programs to increase machine uptime
  • Install, maintain, and troubleshoot power distribution systems, branch circuits, lighting systems, transformers, and wiring methods and materials
  • Fulltime
Read More
Arrow Right