Motor Engineer Job at Activate Group Limited (Peterborough)

Full-Stack Motor Control Engineer

We are seeking a Full-Stack Motor Control Engineer who combines strong control-t...

Location

United States , San Jose

Salary:

150000.00 - 240000.00 USD / Year

Figure

Expiration Date

Until further notice

Requirements

6+ years of hands-on experience developing embedded systems for high-performance motion control
Proficiency in embedded C/C++ for real-time control on MCUs/DSPs
Strong foundation in motor control theory (FOC, dq transformations, loop design, field-weakening)
Solid understanding of ADC/PWM synchronization, ISR timing and task-scheduling
Experience with motor drivers, inverters, current sensing, and encoder interfaces
Familiarity with digital signal processing and frequency-domain analysis for control diagnostics
Proficiency in MATLAB/Simulink or Python for modeling and data analysis
Skilled with lab equipment for validation and software debugging
Excellent communication and planning skills
Resilient and effective in fast-paced, challenging environments

Job Responsibility

Architect, implement, and tune current control loops for PMSM and BLDC actuators
Develop, optimize and debug real-time embedded firmware in C/C++ for MCUs/DSPs (e.g., STM32)
Design and validate observers and estimators for primary controls and for enhanced diagnostics and fallback strategies
Design and validate state machines for control modes and fault handling
Model control systems and simulate dynamics using MATLAB/Simulink or Python
Bring up and debug custom inverter hardware, current sensors, and encoders
Develop automated test routines for dynamic response, torque linearity, and efficiency mapping for motor-dynamometers and actuator-dynamometers
Integrate high-speed telemetry and data-logging for system identification and control verification
Collaborate cross-functionally to integrate actuators into robotic subsystems and end-effectors
Support continuous improvement of control robustness and performance

Fulltime

Software Engineer, Firmware (Motor Controls)

Harbinger is an American commercial electric vehicle (EV) company on a mission t...

Location

United States , Garden Grove

Salary:

140000.00 - 180000.00 USD / Year

Harbinger Motors

Expiration Date

Until further notice

Requirements

Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field
3+ years of experience in embedded firmware development, with a focus on motor controls and electric vehicle applications
Hands-on experience with ARM Cortex-M microcontrollers or equivalent platforms
Proficient in C/C++ for embedded systems
Strong understanding of motor control algorithms and digital signal processing (DSP)
Experience with control theory, PID tuning, and sensorless control techniques
Familiarity with communication protocols such as CAN, SPI, I2C, and UART
Knowledge of complex timer and cross-triggering peripherals such as eTPU and GTM
Experience with embedded development tools
Proficient in testing and debugging tools such as oscilloscopes, logic analyzers, and HIL testing environments

Job Responsibility

Firmware Development: Design and implement embedded firmware for advanced motor control systems in electric vehicles
Board Support Package and Driver configuration: Configure board support packages from microcontroller suppliers for enablement and optimal performance of application software in real-time applications
Motor Control Algorithms: Implement and optimize control algorithms including Field-Oriented Control
Performance Optimization: Enhance the efficiency of CPU performance, reducing overhead, optimizing memory footprint, and meeting performance and safety goals of the system
Testing & Validation: Perform testing, debugging, and validation of firmware using real-time simulation, Hardware-in-the-Loop (HIL)
Integration & Debugging: Work closely with hardware, software, and power electronics teams to ensure seamless integration of firmware with motor control systems
Documentation: Create and maintain comprehensive documentation of firmware design, development processes, and testing methodologies

What we offer

Comprehensive Health, Dental & Vision (HDV) – 100% employee covered
Early-stage Stock Options
Robust Retirement Savings (401k, HSA, FSA)
Generous Paid Time Off (PTO) & Parental Leave
Annual Vacation Bonus
Wellness & Fertility Benefits
Cell Phone Stipend
Complimentary Meals & Stocked Kitchens

Senior Actuator Design Engineer

Figure is an AI robotics company developing autonomous general-purpose humanoid ...

Location

United States , San Jose

Salary:

150000.00 - 190000.00 USD / Year

Figure

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical Engineering
3+ years of experience in mechanical design of actuators, electric motors, or gear-driven systems
Strong fundamentals in mechanical design, dynamics, and structural analysis
Proven experience designing planetary or other compact gearbox architectures
Deep understanding of bearing selection, preloading, and life estimation
Proficiency with CATIA (V5 or V6) for complex assemblies and surfacing
Hands-on experience with rotor balancing and high-speed design for rotating systems
Proficient with KISSsoft or Romax for gearbox modeling and optimization
Excellent communication skills and ability to thrive in a fast-paced, cross-functional environment

Job Responsibility

Own the mechanical design of electric actuators, including lamination stacks, high-speed rotors, geartrains, and bearing systems
Design and size planetary gearboxes and other reduction stages to meet torque density, speed, and lifetime requirements
Architect full actuator assemblies including structural layout, thermal path considerations, and serviceability
Lead design of rotor and stator assemblies including magnet retention (adhesives, interference fits), balancing, and burst strength analysis
Perform detailed tolerance stack-ups, shaft fits, bearing life calculations, and structural analysis using FEA
Use KISSsoft or Romax to model gearbox performance, lifetime, and manufacturability
Develop detailed CAD in CATIA and release complete drawing packages for supplier release and internal manufacturing
Collaborate closely with electromagnetic, controls, and system teams to deliver integrated, validated actuator solutions
Support vendor discussions and DFM reviews to ensure robust and scalable production of actuator components

Fulltime

Multi Skilled Mechanical Engineer

Are you an experienced Multi Skilled Mechanical Engineer looking for your next c...

Location

United Kingdom , Darlington

Salary:

38000.00 - 40000.00 GBP / Year

Boden Group

Expiration Date

Until further notice

Requirements

Formal training in mechanical services maintenance
Experience working with pumps, motors and valves
Strong fault-finding and repair skills
Basic BMS knowledge (advantage)
Good communication skills, both written and verbal
Able to work independently and as part of a team

Job Responsibility

Deliver all PPM and reactive maintenance in line with schedules, SLAs and industry standards
Monitor and maintain key building plant and equipment daily
Respond to emergency callouts, diagnose faults and carry out repairs
Work on a range of mechanical equipment including pumps and motors
Ensure full compliance with health & safety procedures and site processes
Manage site logbooks and ensure CAFM/Concept systems are kept up to date, with all tasks completed within SLA
Resolve client issues promptly with minimal disruption
Work both independently and as part of the site team
Participate in the out-of-hours on-call rota

What we offer

25 days annual leave + bank holidays
Cycle to work scheme
Holiday purchase scheme
Excellent training and career development opportunities

Fulltime

Embedded Firmware Engineer

Contribute across the embedded stack—motor control, sensor interfaces, bootloade...

Location

United States , Palo Alto

Salary:

137861.00 - 240000.00 USD / Year

1X Technologies

Expiration Date

Until further notice

Requirements

Hands‑on experience developing embedded firmware (motor control, MCU APIs, sensor interfacing, etc.)
Familiarity with OTA updates, bootloader design, and secure firmware deployment
Experience with hardware‑software integration, bringing up new hardware platforms
Knowledge of test automation, CI/CD, and HIL testing environments
Strong attitude toward “getting things done” and balancing long‑term planning with short‑term execution
Background in robotics, automotive, consumer electronics, or other products with embedded safety/security requirements

Job Responsibility

Architect and develop firmware for motor controllers, sensor interfaces, and battery management systems
Build robust OTA firmware update and bootloader deployment solutions
Participate in hardware‑software integration and system bring‑up projects across teams
Contribute to continuous integration / continuous deployment (CI/CD) infrastructure and hardware‑in‑the‑loop (HIL) test beds
Drive features in safety, security, and higher‑level robot software safety layers
Guide improvements in firmware standards, reliability, and development process

Fulltime

Service Engineer

Site Service Engineer is responsible for conducting preventive and corrective ma...

Location

Egypt , Cairo

Salary:

Not provided

Giza Systems

Expiration Date

Until further notice

Requirements

Good practical experience PLC trouble shooting & pneumatic system & motor drives
Ability to follow up on Network cables and Industrial PCs & Servers
Ability to understand the vision system operating system
Level of proficiency in using Microsoft office (Excl, word, outlook ..)
Very good communication and interpersonal skills
Excellent technical report skill
Good team player
Good command of English
Leadership skills
Engineer

Job Responsibility

Conduct preventive and corrective maintenance
Minimizing downtime, set-up time through timely interventions for troubleshooting and repairing
Improving the automation system efficiency and effectiveness by supporting the implementation of improvements and repairing to maximize the Effectiveness
Ensures that the Automation solutions are working continuously at the established level of efficiency and effectiveness
Plan, Assign & monitor the duties & tasks of the technicians on the site
Ensure the procedures of HSE are being implemented by the technicians on the site
Report any problem on the site
Assist in commissioning phase and validation during project implementation
Revise the spare parts equipment in storage area and report the status
Conduct Site Survey / Technical report

Fulltime

Commercial Manager

Are you looking for a new challenge? Fancy helping us shape the future of motor ...

Location

United Kingdom , Manchester

Salary:

Not provided

Prima

Expiration Date

Until further notice

Requirements

Proven experience in a Commercial or Strategic Supplier Management role, ideally within the motor repair/automotive sector
Strong background and demonstrable knowledge of motor vehicle claims engineering, repair methodologies, and key industry systems (eg Audatex, Glassmatix/GT Motive)
Expert-level negotiation and contract management skills with a proven track record of delivering measurable commercial value through supplier relationships
Exceptional analytical skills with the ability to interrogate complex data sets, interpret performance trends and translate insights into actionable commercial strategies
Highly effective communicator and influencer with strong influencing skills, capable of building credibility and managing relationships with both internal senior leaders and external partners
Excellent verbal and written communication to effectively represent Prima to external partners (reinsurers and market)
Comfortable working in a growing / scale-up business environment. Strong attention to detail, with a problem-solving attitude

Job Responsibility

Drive Commercial & Financial Performance Management: Take ownership of the commercial elements related to our Third Party Administrator and its repair network/engineering team, driving cost-saving initiatives, fraud monitoring and ensuring optimal indemnity spend without compromising safety or quality
Lead and manage commercial negotiations with future suppliers, including repair network partners and engineering service providers, ensuring mutually beneficial, market-competitive contractual terms
Design, monitor and report on key commercials and claims engineering KPIs (eg repair cost, total loss ratios, parts utilisation, cycle time) to identify trends, opportunities and risks
Contribute to the claims budget process, providing accurate forecasting and analysis relating to repair and claims costs
Strategy & Governance: Design, develop and implement the long-term strategy for our Engineering Department, including engagement of a repair network, ensuring adequate capacity, capability and geographical coverage to meet business and customers' needs
Establish robust governance frameworks, including auditing and performance management protocols to ensure our TPA, our repair network and engineering team and other partners comply with contractual agreements, regulatory requirements and our quality standards
Identify, champion and deliver change initiatives across the repair and engineering claims journey to enhance efficiency, drive digital adoption and improve customer experience
Relationship & Stakeholder Management: Build and maintain high-performing, long-term relationships with our TPA, repair networks, part suppliers and other associated vendors
Act as the primary interface between the Claims, Pricing, Underwriting and Finance Teams, ensuring a clear and consistent commercial view of the repair network’s contribution to overall business performance
Act as a final point of technical and commercial escalation for complex, high-value, or high-profile repair and engineering issues, driving resolutions that protect both the customer and the company

What we offer

Hybrid working, with a mix of home and office days
Access to learning resources, mentorship and a growth plan tailored to you
Private healthcare, gym discounts, wellbeing programs and mental health support

Fulltime

New

Senior Engineer – APD Motors

We’re ALTEN Technology USA, an engineering company helping clients bring groundb...

Location

United States , Detroit

Salary:

Not provided

ALTEN Technology USA

Expiration Date

Until further notice

Requirements

BS or MS Degree in Electrical Engineering, Automotive Engineering, Mechatronics, or equivalent
Minimum 8 years of experience in the automotive electric motor or actuator industry
Strong background in product engineering with solid understanding of motor design, able to read, review, and modify engineering drawings when needed
Experience in motor and actuator development, including design validation, testing, and product industrialization
Good knowledge of automotive development processes (APQP, DFMEA, DVP&R, DVPR, SPC)
Experience with NVH and EMC topics related to electric motors or actuators
Fluent in English
Strong communication, coordination, and problem-solving skills
Senior experience in automotive electric motor or actuator product development
Deep knowledge of EMC

Job Responsibility

Support motor and actuator development projects from concept through validation and safe launch
Review, assess, and update motor and component drawings in collaboration with design teams
Define, develop, and maintain DVP&R and ensure alignment with customer and internal requirements
Plan, coordinate, and follow up on design validation and testing activities, including internal and external test labs
Ensure proper execution of tests and analyze results with cross-functional teams
Prepare, review, and release technical documentation including DFMEA, DVP&R, and project deliverables
Interface with customers, suppliers, program management, quality, and manufacturing teams
Support resolution of technical issues (design, test, NVH, EMC) until product release
Ensure compliance with product development processes and audit requirements
Work in a global environment, including coordination with teams in North America, Asia, and other regions

Motor Engineer

Activate Group Limited

Location:
United Kingdom , Peterborough

Category:
IT - Administration

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
January 15, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Motor Engineer

Full-Stack Motor Control Engineer

Software Engineer, Firmware (Motor Controls)

Senior Actuator Design Engineer

Multi Skilled Mechanical Engineer

Embedded Firmware Engineer

Service Engineer

Commercial Manager

Senior Engineer – APD Motors

Motor Engineer

Activate Group Limited

Location:United Kingdom , Peterborough

Category:IT - Administration

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:January 15, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Motor Engineer

Full-Stack Motor Control Engineer

Software Engineer, Firmware (Motor Controls)

Senior Actuator Design Engineer

Multi Skilled Mechanical Engineer

Embedded Firmware Engineer

Service Engineer

Commercial Manager

Senior Engineer – APD Motors

Location:
United Kingdom , Peterborough

Category:
IT - Administration

Contract Type:
Not provided

Job Posted:
January 15, 2026