Mechanical / Manufacturing Engineering Intern, Manufacturing Process Job at 10x Genomics (Pleasanton)

Senior Manufacturing Process Engineer

Ready to join a team of visionaries who is dedicated to solving one of humankind...

Location

Germany , Munich

Salary:

Not provided

Climeworks

Expiration Date

Until further notice

Requirements

Degree in process engineering, manufacturing engineering, mechanical engineering, materials science, or similar
5-10 years of experience in a manufacturing environment including significant experience with start-up phases and successful delivery of commercial products
Experience with continuous manufacturing lines including powder handling processes (HSE regulations and ATEX requirements)
Logic-driven, experienced with both process modeling approaches (heat and mass transfer, etc.) as well as structured risk-identification and problem-solving tools (e.g., process FMEA, 5 Whys, Fishbone)
Take initiative, are results-driven without missing important details, and are hands-on throughout the full development cycle—from lab to high-level evaluations
Collaborate easily across teams, communicate clearly, and enjoy leading both in-house and external projects
Fluent in English
At least B1-level proficiency in German
Knowledge of French is an advantage
Open to frequent travel (up to 60%, primarily between the Munich and Zurich areas)

Job Responsibility

Manufacturing process expert: Climeworks’ core expert in the process operation of novel manufacturing lines for sorbent filter production, during development, startup, and operation
Own all aspects of manufacturing process engineering to produce new sorbent filter material (working with manufacturing engineers and product owners): Understand process parameters & product impact
Evaluate and tune parameter ranges used in equipment purchases and in startup
Lead manufacturing process ramp-up, troubleshooting, and root cause analysis
Lead and own process FMEAs before, during, and after the startup phase
Ensure good documentation, training, and knowledge transfer
Cross-Functional Collaboration: Collaborate closely with internal experts in R&D, characterization/quality, product design, and sorbent/process development to ensure manufacturing process parameters lead to a guaranteed high-quality sorbent module product, and support the development of new testing methods
External partnerships & technical leadership: Act as a key technical expert in collaborations with external partners, ensuring DAC-specific requirements for sorbent filters manufacturing are met, including by being on-site to monitor operations when needed
Team player: Where needed, support lab-scale manufacturing in R&D, and new concept evaluation, for future-oriented DAC solutions

Process Engineering Intern

The Process Engineering Intern will support key manufacturing initiatives focuse...

Location

United States , Houston

Salary:

22.00 - 25.00 USD / Hour

H.B. Fuller

Expiration Date

Until further notice

Requirements

Currently pursuing a bachelor’s degree in chemical, mechanical, industrial, or an engineering related field
Minimum rising junior or senior standing
Familiarity with Microsoft Office Suite and basic understanding of AutoCAD

Job Responsibility

Assist in identifying and implementing process improvements to increase equipment efficiency
Support continuous improvement initiatives using lean manufacturing techniques
Contribute to automation and packaging enhancement projects
Apply statistical tools to analyze process performance and identify opportunities
Participate in the development of standardized work procedures
Collaborate with operations and engineering teams to strengthen cross-functional teamwork
Assist with safety program initiatives and facility-wide improvements

What we offer

12-week paid program
Interactive orientation and events with skilled professionals
Multiple networking, volunteer and fun events
Impactful projects
End of summer final presentation
Competitive total rewards package including comprehensive benefits, incentive and recognitions programs, health & wellness benefits, 401K contributions, paid time off and paid holidays

Fulltime

Manufacturing Engineer Intern

As a Manufacturing Engineer Intern at Machina Labs, you’ll work with a dynamic t...

Location

United States , Chatsworth

Salary:

20.00 - 35.00 USD / Hour

Machina Labs

Expiration Date

Until further notice

Requirements

Currently pursuing a Bachelor’s or Master’s in Mechanical, Manufacturing, Industrial, or Aerospace Engineering, or a related STEM field
Expected to complete or have completed final degree within one year of the internship’s end
Practical experience with CAD/CAM software (SolidWorks, Fusion 360, Creo, etc.)
Strong understanding of engineering first principles and interest in building physical hardware
Effective communicator
able to work in cross-functional teams and contribute to technical discussions
Detail-oriented, enthusiastic about hands-on work and continuous improvement in manufacturing
GPA of 3.0 or above preferred

Job Responsibility

Help evaluate designs for manufacturability and perform testing, collaborating actively with the design and production teams
Assist in designing and implementing tooling and test solutions that support hardware build and delivery
Contribute to developing new processes and procedures for manufacturing operations and flight hardware builds
Participate in time studies, layout refinement, and capacity modeling initiatives to drive process improvements
Collaborate with cross-functional teams to troubleshoot production challenges and resolve product non-conformances
Document technical procedures, experiments, and analyses for knowledge-sharing and process improvement

Fulltime

Senior Technical Project Manager

We are seeking an experienced and highly motivated Project Manager to join our S...

Location

United States , South Jordan

Salary:

Not provided

Cricut

Expiration Date

Until further notice

Requirements

Bachelor's degree in Engineering (Mechanical Engineering, Manufacturing Engineering or Process Engineering strongly preferred)
Working knowledge of software/firmware and some programming background
Familiar with electronics, with the ability to read and understand electrical schematics and wiring diagrams
2+ years in Project Management related to product development
5+ years working on products and assembly lines in a Mechanical Engineering, Process or Manufacturing Engineering capacity
Ability to utilize various technologies and tools to effectively manage projects and provide clear and concise communications to teams and stakeholders
Adept in Microsoft Project, MS Excel, Jira. Proficiency in Minitab desirable
The ability to understand and apply statistical process control methods is highly desirable including Cpk’s, T-Tests, X-Bar/R charts, DOE’s, etc.
Must be willing to work in our Salt Lake City (South Jordan) office Monday through Friday each week
Ability to regularly travel to Asia as needed (likely 4x/yr, can include travel to Malaysia and other areas of Asia)

Job Responsibility

Work as the technical and programmatic focal point and facilitator for Sustaining Engineering activities in our Utah office
Prioritize highest value projects with US SE team and organize resources against them
backlog other ideas to keep SE to-do lists lean
Identify part, product and assembly issues quickly and work through root cause to resolution
Prepare budgets, purchase orders and schedules as needed for SE projects
Identify cost-reduction opportunities at a part, product, assembly and calibration level
Coordinate testing activities with engineers and the quality department to ensure product meets engineering and product specifications
Manage, document and confirm product changes at multiple contract manufacturers
check and maintain consistency of solutions/updates across multiple contract manufacturers
Ensure that management and stakeholders are notified of any potential schedule impacts

Fulltime

Senior Mechanical Engineer: Test Development Engineering

As a Senior Mechanical Engineer in Test Development Engineering, you will play a...

Location

United States , South Jordan, Utah

Salary:

Not provided

Cricut

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical Engineering, Mechatronics, or a related field
10+ years of experience in mechanical design, test and calibration equipment development, or precision metrology systems
Proficiency in CAD software (Creo, SolidWorks) and related engineering analysis tools (FEA, tolerance analysis)
Strong understanding of mechanical systems, pneumatic and electromechanical integration, and manufacturing processes
Deep knowledge of measurement science, tolerance analysis, and statistical methods for calibration and product qualification
Experience in test system design, metrology instrumentation, and mechanical calibration processes
Hands-on experience with mechanical test setups, data acquisition, and troubleshooting of measurement systems
Excellent analytical, problem-solving, and documentation skills
Strong communication skills and ability to lead cross-functional technical efforts

Job Responsibility

Conceptualize, design, and document assembly jigs, test fixtures, and precision metrology systems to support both production and validation testing
Develop custom calibration and test instruments, including mechanical, pneumatic, and electro-mechanical assemblies for high-accuracy measurements
Integrate sensors, load cells, displacement transducers, pressure gauges, and other instrumentation into test systems to support product calibration and verification
Collaborate with cross-functional teams (Design, Manufacturing, Quality, Calibration Labs, and Contract Manufacturers) to define test requirements and system capabilities
Utilize CAD software (Creo, SolidWorks) to create detailed 3D models and drawings of mechanical systems, with GD&T applied for precision alignment and repeatability
Generate and maintain Requirement Documents, Calibration Procedures, and Test System Specifications to ensure alignment between product and test design intent
Participate in supplier design reviews and qualification of external test and calibration equipment
Develop and validate test procedures, calibration methods, and verification plans for measurement systems and mechanical fixtures
Ensure measurement system analysis (MSA), gage R&R, and traceability to NIST or equivalent standards in all calibration processes
Conduct statistical evaluations of test data to assess system reliability, repeatability, and reproducibility

What we offer

competitive Medical, Dental, and Vision coverage
401(k) match
generous PTO
tuition reimbursement
yearly lifestyle stipend
exclusive employee discounts

Fulltime

Robotic Process Engineer

At Machina Labs, we’re reshaping manufacturing through advanced robotics and mac...

Location

United States , Chatsworth

Salary:

100000.00 - 130000.00 USD / Year

Machina Labs

Expiration Date

Until further notice

Requirements

B.S. in Mechanical, Manufacturing, Industrial, or Aerospace Engineering, or related field
Minimum 2 years of experience (or fewer with advanced degrees) in a manufacturing, robotics, or prototyping environment
Proficiency in CAD software (e.g., SolidWorks, Fusion 360, Rhino)
Familiarity with CAM, tool path generation, or robot programming
Strong data analysis skills (e.g. MATLAB, Python, advanced Excel or similar tools)
Comfort working in open-ended problem spaces, making rapid decisions and course corrections as needed
Strong attention to detail and ability to follow standard processes
Comfortable working in a hands-on, fast-paced manufacturing environment
Demonstrated ability to interface with interdisciplinary teams and internal/external project stakeholders
Effective written and verbal communication skills

Job Responsibility

Generate and modify CAD models to ensure compatibility for RoboForming
Use internal software stack to convert CAD into robot tool paths for execution on the RoboCraftsman
Analyze RoboForming data and 3D scan results to assess part quality and identify areas for improvements
Design and execute structured experiments (DOE) to optimize forming parameters and tool path strategies
Collaborate with product managers, software engineers, and manufacturing engineers to improve workflows and tool path strategies
Contribute to technical discussions with external customers as needed to support project goals and ensure alignment
Work autonomously and making informed decisions with limited data, then refining based on outcomes
Document process, results, and analyses for continuous improvement for internal use

What we offer

Medical
Dental
Vision
PTO
Stock Options

Fulltime

Mechanical Engineer

The Mechanical Engineer is responsible for the mechanical design of simulated tr...

Location

United States , Tampa

Salary:

Not provided

Aero Simulation, Inc. (ASI)

Expiration Date

Until further notice

Requirements

Minimum of three years of practical experience using parametric modeling and analysis software, preferably Solidworks
Must have experience specifying proper manufacturing processes for new design fabrication including machining, welding, and sheet metal fabrication
Must have experience with detailed mechanical mechanism design including specifying bearings, gears, pullies, press fits, tolerancing, motors, couplings, and fasteners
Knowledge of welding, machining, sheet metal, composite, 3D printing, fastening, manufacturing / fabrication processes, and finite element analysis a plus
Knowledge and experience with simulators or simulator industry a strong plus
Knowledge and proficiency with AutoCAD software highly desired
Excellent communication skills
Ability to develop and maintain positive working relationships
Ability to adapt communication style
Ability to manage multiple priorities and projects

Job Responsibility

Work closely with Systems and Electrical Engineering to gather a comprehensive view for the design and development of new training systems
Review, evaluate, research, and design to contractual specifications
Produce mechanical designs and details that are manufacturable, ergonomic, reliable, and maintainable
Create new parts, assemblies, and drawings in SolidWorks
Work with and mentor mechanical engineers and drafters
Create and present mechanical material to support customer meetings
Provide support to manufacturing in resolving design and documentation issues
Communicate effectively and work closely with the mechanical CAD team
Assist with preparation and cost estimation of new proposals
Oversee assembly, modifications, and installations of your design

What we offer

Employee Stock Ownership Plan (ESOP)
Flexible work environment
Generous paid time off
Professional development opportunities
Industry competitive compensation
Medical benefits
Dental benefits
401k

Fulltime

Technical Program Manager

We are seeking an experienced and highly motivated Program Manager to join our S...

Location

Malaysia , Johor Bahru

Salary:

Not provided

Cricut

Expiration Date

Until further notice

Requirements

Bachelor's degree in Engineering (Mechanical Engineering, Manufacturing Engineering or Process Engineering strongly preferred)
Working knowledge of software/firmware and some programming background
Familiarity with electronics, ability to read and understand electrical schematics and wiring diagrams
5+ years in project management related to product development
5+ years working on assembly lines or in a Process or Manufacturing Engineering capacity
Strong communication skills, teamwork and interpersonal skills
Strong analytical and problem-solving skills
Ability to utilize various technologies and tools to effectively manage projects and provide clear and concise communications
Adept in Microsoft Project, MS Excel, Jira
Proficiency in Minitab desirable

Job Responsibility

Work as the technical and programmatic focal point and facilitator for Sustaining Engineering activities in our Malaysia office
Prioritize highest value projects with US, SE team and organize resources against them
backlog other ideas to keep SE to-do lists lean
Identify part, product and assembly issues quickly and work through root cause to resolution
Prepare budgets, purchase orders and schedules as needed for SE projects
Identify cost-reduction opportunities at a part, product, assembly and calibration level
Coordinate testing activities with engineers and the quality department to ensure product meets engineering and product specifications
Manage, document and confirm product changes at multiple contract manufacturers
check and maintain consistency of solutions/updates across multiple CMs
Ensure that management and stakeholders are notified of any potential schedule impacts

Fulltime

Mechanical / Manufacturing Engineering Intern, Manufacturing Process

10x Genomics

Location:
United States , Pleasanton

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 10, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Mechanical / Manufacturing Engineering Intern, Manufacturing Process

Senior Manufacturing Process Engineer

Process Engineering Intern

Manufacturing Engineer Intern

Senior Technical Project Manager

Senior Mechanical Engineer: Test Development Engineering

Robotic Process Engineer

Mechanical Engineer

Technical Program Manager

Mechanical / Manufacturing Engineering Intern, Manufacturing Process

10x Genomics

Location:United States , Pleasanton

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 10, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Mechanical / Manufacturing Engineering Intern, Manufacturing Process

Senior Manufacturing Process Engineer

Process Engineering Intern

Manufacturing Engineer Intern

Senior Technical Project Manager

Senior Mechanical Engineer: Test Development Engineering

Robotic Process Engineer

Mechanical Engineer

Technical Program Manager

Location:
United States , Pleasanton

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
January 10, 2026