Mechanical Engineer

Engineer - Mechanical (Rotating Equip)

The Rotating Equipment Engineer is responsible for providing technical engineeri...

Location

United States , Tulsa

Salary:

Not provided

HF Sinclair

Expiration Date

Until further notice

Requirements

A minimum of five years of progressive work experience in a specific engineering discipline
A minimum of a Bachelor's Degree in an Engineering discipline is required with a Mechanical Engineering degree preferred
Familiar with API Recommended Practices regarding Boiler and Pressure Vessel Codes
Demonstrated proficiency with ASME Section I and Section VIII, B31.1 (boiler piping) and B31.3 (process piping), API 510, 570/571, 580/581, 650/653
Familiar with quantitative risk management tools and techniques
Familiar with all common methods of NDE used in the petrochemical industry
Intermediate knowledge of commonly used engineering concepts and ability to apply this knowledge analytically
Ability to coordinate all phases of a project

Job Responsibility

Develop, manage and participate in programs, methods, systems and practices for maintaining a safe work environment
Responsible for carrying out all work activities in compliance with federal and state environmental regulations
Perform duties in adherence with company procedures, standards, and specifications
Assist production and maintenance organizations throughout the plant in troubleshooting and repairs of rotating equipment
Monitor rotating equipment and make recommendations to improve reliability and reduce cost
Develop and review general and asset specific rotating equipment repair procedures
Provide training to production, maintenance, and technical departments in the proper operation and maintenance of rotating equipment
Develop and sponsor capital and expense projects to reduce overall plant risk and maintenance costs. Provide technical support throughout design and installation of projects
Assist training departments with development and review of operating procedures for rotating equipment
Maintain rotating equipment KPI’s and review for trends in equipment repairs. Develop plans to mitigate repeat rotating equipment failures

What we offer

Medical Insurance
Vision Insurance
Dental Insurance
Paid Time-Off
401(k) Retirement Plan with match
Educational Reimbursement
Parental Bonding Time
Employee Discounts

Fulltime

Senior Manager, Mechanical Engineering

Veeco has an opening in Plainview, NY, for a Senior Manager, ETO (Engineer-To-Or...

Location

United States , Plainview

Salary:

159000.00 - 200000.00 USD / Year

Veeco Instruments

Expiration Date

Until further notice

Requirements

Bachelor’s or Master’s degree in mechanical engineering is required
A minimum of 10 years of experience with engineering design and development and experience in semiconductor equipment or other capital equipment is preferred
A minimum of 5 years in an engineering leadership position performing new product development is required
Ability to lead a multi-disciplinary engineering team in the design of complex technical equipment with a team comprised of direct employees, consultants, and temps
Ability to manage multiple ongoing projects, priorities, and risks within specified time and budgetary restrictions
Ability to estimate, plan, schedule, and allocate resources for engineering activities
Strong working knowledge and application of mechanical engineering principles
Possess a system-level understanding of electro-mechanical systems, including a working knowledge of electrical and software principles
Ability to interpret engineering drawings, system block diagrams, electrical schematics, engineering specifications, and manufacturing requirements is required
In-depth understanding of the product life cycle (PLC) and phase gate review process

Job Responsibility

Manage and lead mechanical, electrical, and program management resources, as well as matrix-managed software resources, with full ownership and responsibility to execute new tool and upgrade ETO projects through all phases of the product lifecycle, including concept, prototyping, development, qualification, production support, and field support
Coordinate the completion of milestones for critical product development programs while making effective use of internal and outsourced resources
Participate in customer requirements and specification reviews with a cross-functional group, including Marketing and Operations, prior to quote delivery
Upon purchase order acceptance, work closely with Marketing and Operations to translate customer process requirements into system configurations and design requirements
Plan, schedule, and resource engineering activities in coordination with the Operations build schedule and committed delivery dates
Provide Engineering support to Operations during the manufacturing build process
Drive all engineering documentation and deliverables, including product BOM’s, P&IDs, and engineering drawings, to be prepared, updated, and released in accordance with applicable company format and procedural requirements
Provide technical support for escalations on released and ETO products when additional support is requested by Field Service or Operations personnel
Ensure compliance with applicable industry safety and regulatory standards
Manage internally and externally sourced engineering changes (ECs) that are compliant with the Veeco change process and in support of program schedule requirements

What we offer

Medical, Dental, and Vision
Employee Stock Purchase Plan (ESPP)
401(k) with Company Match
Holiday, Vacation, and Sick Time
Flexible Spending Accounts (FSA)
Commuter Benefits
Life and Accident Insurance
Disability Insurance
Tuition Reimbursement
Employee Assistance Program (EAP)

Fulltime

Manager, Mechanical Engineering

The Manager of Mechanical Engineering position is based in Horsham, PA, and will...

Location

United States , Horsham

Salary:

125000.00 - 160000.00 USD / Year

Veeco Instruments

Expiration Date

Until further notice

Requirements

BS degree in Mechanical Engineering with at least 8 years of experience or an MS degree in Mechanical Engineering with at least 6 years of related experience
At least 5 years of people management experience
Project management experience
Must be proficient using SolidWorks, AutoCAD, SAP or a similar MRP system
Experience developing capital equipment
Ability to work effectively in a fast-paced, dynamic environment as part of a multi-disciplinary team
Ability to take initiative, own full projects, and lead team of mechanical engineers
Ability to manage multiple ongoing projects within specified time and budgetary restrictions
Ability to read and understand Plumbing and Instrumentation Diagrams (P&ID)
Familiarity with plumbing system design using standard and custom components used in high purity gas and wet chemical processing equipment

Job Responsibility

Manage and lead Mechanical Engineering activities within the PSP/Horsham location
Supervise and mentor team members, including outsourced vendors & consultants
Define design specifications based on customer requirements and industry standards
Verify design intent and ensure compliance with regulatory/safety requirements
Lead team through all phases of the design process for new product and continuous product improvement programs
Ensure that programs are executed on time, within budget, and meet design specifications and cost targets
Prepare and present mechanical designs at peer reviews and cross function design reviews
Interface with electrical, process and software engineering, marketing, and operations teams
Continually look for opportunities to increase efficiency of the design and build processes
Support supply chain with mechanical material procurement efforts within project deadlines

What we offer

Medical, Dental, and Vision
Employee Stock Purchase Plan (ESPP)
401(k) with Company Match
Holiday, Vacation, and Sick Time
Flexible Spending Accounts (FSA)
Commuter Benefits
Life and Accident Insurance
Disability Insurance
Tuition Reimbursement
Employee Assistance Program (EAP)

Fulltime

Senior Engineer, Equipment Engineering

Sandisk understands how people and businesses consume data and we relentlessly i...

Location

Malaysia , Batu Kawan

Salary:

Not provided

Sandisk

Expiration Date

Until further notice

Requirements

Bachelor of Engineering (Hons) in Electrical / Electronics/ Mechanical / Mechatronic
3+ years of experience in test equipment engineering, specifically in SSD manufacturing or a related industry, with a strong emphasis on sustaining and maintenance
Proven track record of maintaining high slot-on availability and first pass yield in a high-volume production environment
Experience in utilizing data analytics for equipment monitoring, troubleshooting, and maintenance optimization
Expertise in maintaining and troubleshooting SSD test equipment, with a deep understanding of calibration, reliability, and maintenance protocols
Proficiency in data analysis tools (e.g., Python, R, SQL, MATLAB) for monitoring and optimizing equipment performance
Strong knowledge of predictive maintenance techniques, including AI-driven approaches to equipment reliability
Familiarity with SPC, DOE, and Six Sigma methodologies for continuous improvement
Strong leadership skills with the ability to mentor and guide junior engineers and technicians
Excellent problem-solving and decision-making abilities, with a focus on data-driven solutions

Job Responsibility

Ensure that test equipment is functioning optimally, achieving >99.3% slot-on availability and maintaining a high first pass yield
Perform routine maintenance, calibration, and troubleshooting of test systems to minimize downtime and ensure high reliability
Monitor real-time and historical data to detect issues, reduce failures, and maximize equipment uptime
Use data analytics to monitor test equipment performance, identify patterns, and anticipate potential issues before they impact production
Analyze test equipment data to improve test efficiency, reduce down times, and enhance tester performance
Implement real-time monitoring and diagnostic tools to ensure sustained optimal performance of test equipment
Analyze equipment performance data to optimize maintenance schedules and extend the life cycle of test equipment
Lead continuous improvement projects focused on sustaining and enhancing the efficiency and reliability of test equipment
Lead and mentor a team of engineers and technicians in sustaining tester, sharing best practices for maintenance and troubleshooting
Work closely with production, quality, and other cross-functional teams to ensure seamless operation and continuous improvement in testing

Fulltime

Engineer, Mechanical Engineering

iAutomation, a high technology distributor of industrial automation components, ...

Location

United States , Franklin

Salary:

Not provided

iAutomation

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical Engineering
Experience in SolidWorks including Model creation and deformation modeling/simulation
Experience with Aluminum Extrusion including: Model assembly creation, Assembly quoting, Assembly Labor estimation
Experience with laying out and designing pneumatic systems
Prior experience reporting to management in other locations is a plus
Sitting for long periods of time
Long hours of computer work
Some car and air travel required

Job Responsibility

Collaborate with customers and the sales team to design custom solutions
Create and approve customer quotes and sales orders utilizing our ERP and engineering design tools as required
Use 3D SolidWorks to design safety guard frames, pneumatic assemblies, electro-mechanical assemblies, custom components, enclosures and various mechanical assemblies
Work cross-functionally with operations to ensure purchasing and planning execution are successful
Create shop floor documentation and provide technical guidance internally and externally
Perform various stress bearing and maximum load capacity calculations
Research, designs, and develops tools, machines, controls, equipment, and mechanical processes
Oversee production, installation, operation, maintenance, repair, and development of new, modified, and/or existing systems
Work with production staff on design revisions and red lines as needed
Collaborate and support customer support needs and on-site visits as needed for FIA

Fulltime

Project Manager, Powertrain Mechanicals

Archer is an aerospace company building an all-electric vertical takeoff and lan...

Location

United States , San Jose

Salary:

165000.00 - 181500.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical Engineering, Electrical Engineering or Aerospace Engineering
4 years of experience with powertrain systems such as batteries, inverters, gearboxes and related ground support equipment
Experience as a Project Manager, Mechanical Engineer, Design Engineer, Quality Engineer, Manufacturing Engineer or related occupation

Job Responsibility

Build and maintain strong relationships across Archer teams, inclusive of suppliers, involved in the Inverter - Mechanicals and High Voltage Junction Box - Mechanicals subsystem development and operations
Act as the primary interface between Engineering, Program Management, Manufacturing, and Supply Chain on project deliverables, issues, and resolution for Engineering builds
Escalate to commercial or technical partners when required
Coordinate with Powertrain Program Managers on the product design and build schedule
Build project task-based schedules and track/report milestone progress against the program management plan
Identify and manage project Risks, Issues and Opportunities to closure in partnership with Engineering leads and Powertrain Program Managers
Execute within project schedule and budget, tracking expenses and identifying cost-savings opportunities
Align with Design Engineering on revision control of what is being procured for Engineering Builds, support bill of materials (BOM) reviews and maintenance
Utilize configuration control and change management to maintain technical discipline of the program
Identify areas of improvement or gaps in current processes and develop strategies to promote efficiency and productivity

Fulltime

Senior Mechanical Engineer: Test Development Engineering

As a Senior Mechanical Engineer in Test Development Engineering, you will play a...

Location

United States , South Jordan, Utah

Salary:

Not provided

Cricut

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical Engineering, Mechatronics, or a related field
10+ years of experience in mechanical design, test and calibration equipment development, or precision metrology systems
Proficiency in CAD software (Creo, SolidWorks) and related engineering analysis tools (FEA, tolerance analysis)
Strong understanding of mechanical systems, pneumatic and electromechanical integration, and manufacturing processes
Deep knowledge of measurement science, tolerance analysis, and statistical methods for calibration and product qualification
Experience in test system design, metrology instrumentation, and mechanical calibration processes
Hands-on experience with mechanical test setups, data acquisition, and troubleshooting of measurement systems
Excellent analytical, problem-solving, and documentation skills
Strong communication skills and ability to lead cross-functional technical efforts

Job Responsibility

Conceptualize, design, and document assembly jigs, test fixtures, and precision metrology systems to support both production and validation testing
Develop custom calibration and test instruments, including mechanical, pneumatic, and electro-mechanical assemblies for high-accuracy measurements
Integrate sensors, load cells, displacement transducers, pressure gauges, and other instrumentation into test systems to support product calibration and verification
Collaborate with cross-functional teams (Design, Manufacturing, Quality, Calibration Labs, and Contract Manufacturers) to define test requirements and system capabilities
Utilize CAD software (Creo, SolidWorks) to create detailed 3D models and drawings of mechanical systems, with GD&T applied for precision alignment and repeatability
Generate and maintain Requirement Documents, Calibration Procedures, and Test System Specifications to ensure alignment between product and test design intent
Participate in supplier design reviews and qualification of external test and calibration equipment
Develop and validate test procedures, calibration methods, and verification plans for measurement systems and mechanical fixtures
Ensure measurement system analysis (MSA), gage R&R, and traceability to NIST or equivalent standards in all calibration processes
Conduct statistical evaluations of test data to assess system reliability, repeatability, and reproducibility

What we offer

competitive Medical, Dental, and Vision coverage
401(k) match
generous PTO
tuition reimbursement
yearly lifestyle stipend
exclusive employee discounts

Fulltime

Looking for challenging and rewarding work alongside some the best in the busine...

Location

United States , Arlington

Salary:

Not provided

Talent Acquisition Concepts

Expiration Date

Until further notice

Requirements

Bachelor's Degree in Mechanical Engineering or a related field is required
FE/EIT Required, Professional Engineer (PE) registration preferred
5 years of direct experience in facilities mechanical systems such as HVAC, Plumbing (domestic water) systems, Building Automation Systems (BAS), and testing adjusting and balancing (TAB) is required
Experience in a supervisory capacity is desired
Must have a superior track record of client satisfaction in mission-critical facilities and a passion for analyzing, troubleshooting, optimizing, and upgrading integrated systems in aging facilities and campus environments
Must possess an in-depth knowledge of LEED requirements and industry standards and practices i.e. ASHRAE, BCA, ACG, GSA
The successful candidate will be a Self‐starter who initiates action and can work independently or with a team while providing multi‐discipline coordination.
Effective communication and reporting skills at all working and management levels are essential
Must be a creative, innovative, and solutions-oriented thinker with the ability to understand and achieve goals and anticipate client needs
Experience using AutoCAD and/or Micro Station to prepare design plans is required, energy modeling experience is desired

Job Responsibility

Perform energy management, HVAC and life safety surveys, and facilities management evaluations and condition assessments
Prepare feasibility studies for design and construction
Prepare engineering or repair/replacement estimates and schedules
Present reports and explain findings to clients
Conduct design reviews, submittal reviews, reviews and facilitation of training plans, and O&M manual reviews
Prepare mechanical design calculations
utilize mechanical design software
Write technical specifications and develop drawings and visual aids
Review and provide comments on designs for configuration, reliability, redundancy
Review equipment and controls technology selections and strategies

Fulltime

Mechanical Engineer - Equipment Management

Mota Engil

Location:
Democratic Republic of Congo , Port of Banana

Category:
-

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
November 18, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Mechanical Engineer - Equipment Management

Engineer - Mechanical (Rotating Equip)

Senior Manager, Mechanical Engineering

Manager, Mechanical Engineering

Senior Engineer, Equipment Engineering

Engineer, Mechanical Engineering

Project Manager, Powertrain Mechanicals

Senior Mechanical Engineer: Test Development Engineering