Manager, Electrical and Instrumentation Systems Job at Dansons (Peebles)

Electrician/ Electrical Instrument Technician

The Electrical Instrument Technician maintains, constructs and repairs electrica...

Location

United States , Tucson

Salary:

39.38 - 40.30 USD / Hour

CalPortland

Expiration Date

Until further notice

Requirements

Physical requirements: sit, stand, stoop, bend for extended periods of time (up to 8 hrs.), climb, and lift up to 70 lbs.
Walk on all types of surfaces (uneven and/or slippery ground)
Ability to work in surroundings that include dust, vibration, heights and confined spaces
Must work in all weather conditions: heat, cold, wet, dry and/or dusty conditions and near hot kiln process
Exposure to cement, clay, limestone and various chemicals. See MSDS for more details
Able to work rotating and flexible hours
Able to work effectively both independently and as part of a team
Good verbal and written communication skills
Experience with or knowledge of all types of equipment used in the manufacturing of cement preferred
High school diploma/GED

Job Responsibility

Calibrates, designs, reconfigures, assembles, installs, inspects and maintains electrical systems and equipment, such as motors, generators, commutators, speed reducers, switchboards, circuit boards, lighting circuits, SCR, electronic control devices, computers and circuits, etc.
uses blueprints and related resources to complete tasks and checks/verifies work to ensure proper operation
Uses necessary instruments and tools such as voltmeters, ammeters, V.T.V.M’s, bridges, computers, laptops and any other industrial electrical/electronic analyzing equipment and tools needed in carrying out responsibilities
Sets up and uses rigging to handle tools and equipment, such as manlifts and cranes
climbs poles or uses mobile equipment to run, repair, modify, remove, clean, etc., power lines and all associated equipment
Designs, prepares, modifies and maintains logs, reports, charts, schematics, prints and any other paperwork incidental to duties
Maintains equipment, work areas, measuring instruments and tools
Performs minor mechanical work such as removing covers, lids or obstructions prior to electrical repair work
performs cutting and welding
paints electrical/electronic panel, switchgear, motor windings, insulating equipment, control station, etc.

What we offer

medical, dental and vision plans
life insurance
disability coverage
employee assistance program
retirement program
voluntary benefits

Fulltime

Electrical Project Manager

Our Duluth Team is currently looking for an experienced Electrical Project Manag...

Location

United States , Duluth

Salary:

80000.00 - 120000.00 USD / Year

Krech Ojard & Associates

Expiration Date

Until further notice

Requirements

BS in Electrical Engineering with a Professional Engineering License (PE) or eligible for testing within 1 year
5+ years of experience in electrical engineering and design
Knowledge and application of the principles and practices of CAD development and creation of drawing packages at various stages of design development
Ability to effectively communicate and interact with Krech Ojard staff, individuals from other organizations, and client representatives

Job Responsibility

Performing calculations related to the sizing and installation of electrical equipment including: MCC’s, lighting, circuit breakers, motors, transformers, wiring systems, switchgear, and grounding systems
Utilizing the National Electrical Code, IEEE standards, and requirements of insurers in the development of electrical designs at industrial and commercial facilities
Developing detailed equipment specifications for electrical distribution equipment, MCC’s, Drives, low voltage field devices, instrumentation, lighting, circuit protection, and power monitoring equipment
Designing power distribution and grounding systems up to 15kV
Developing motor and process control documents including loop and motor elementary drawings
Analyzing data, preparing reports, and delivering presentations on proposed and ongoing projects to internal staff and clients
Mentoring and overseeing junior engineers and technicians
Performing QA/QC reviews throughout the design development process
Working directly with clients to develop project options and alternatives, provide engineering guidance for project planning and development, field investigations, and critical issues

What we offer

Flexible working schedule to allow for a better work life balance
Comprehensive benefits package including health and dental and 401(k) match
Professional Development and Growth Opportunities
Team Events

Fulltime

Electrical Engineer

We are on a mission to disrupt the global steel industry by producing green stee...

Location

Sweden , Stockholm

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Minimum 6-10 years working experience in major industrial capital projects in the areas of Electrical Design & Engineering, preferably in Steel Plant /Power Plant / Hydrogen / Oil & Gas Major Projects
Highly developed knowledge of industrial scale electrical designing
Experienced in ensuring that all electrical design & engineering documents and installations conform to relevant International & National Codes and Standards and also conform to Local Swedish and Scandinavian standards
To prepare, review, approve the design and site installation documents related to Electrical work, Power System Studies, (Load Flow, Short Circuit, Harmonic Analysis, Protection Relay Settings & Coordination, Equipment Sizing, Equipment Electrical Design Calculations, EHV-HV/ LV Sub-stations including Switchgears, Transformers, Cabling, Relays, UPS, Battery Chargers, HV/MV/LV Motors, Drives, Emergency Generators, Transmission and Distribution of Power, Hazardous area classification, field electrical equipment, Fire Alarm System, Instrumentation & Control System is preferred
Hands on experience on ETAP software, review of Design and Calculations done through ETAP or similar software
Previous project experience with International, Swedish /Scandinavian codes and standards will be an advantage
Experience in design, planning, execution, management & communication with all stakeholders in large successful capital projects
Extensive experience in coordinating with EPCM & OEM Electrical engineers and following, reviewing, commenting and approving design deliverables and documents
Must be knowledgeable about industry best practices and change management
Recent experience managing engineering and construction activities in large capital projects

Job Responsibility

Oversee, review and analyze the electrical design work for one or more areas (Steel Mill, Iron Reduction, Hydrogen Plant, Balance of Plant, PDOP Power Distribution areas and Ground Works) in Boden Project
Ensure coordination of our engineering partners to reach cost and time efficient design solutions for all electrical design & engineering work related to your area
Participate in the cross-functional delivery and technology teams
As part of the owners engineering team you are responsible for engineering assurance within your discipline
Ensure that EPCM and OEM partners get the information and feedback required to deliver the work in a safe, cost-effective, and schedule-effective way
Represent for the Electrical discipline, being the single point of contact for the delivery and quality of the discipline
Own Electrical engineering and design in the areas assigned
Provide leadership and guidance on developing the engineering and design strategy and concepts
Manage engineering work to ensure compliance to codes, standards, regulations, equipment specifications, and process equipment operating targets
Report to Electrical Lead of Project Delivery department

Fulltime

New

Building Electrical & Instrumentation Systems Engineer

Prepare assigned technical documentation (of varying technical complexity, depen...

Location

United Arab Emirates , Al Ruwais, Abu Dhabi

Salary:

Not provided

Met T&S

Expiration Date

Until further notice

Requirements

University degree/diploma in Electrical Engineering/Instrumentation/Electronics Engineering or relevant field
Minimum of 10 years’ relevant construction experience including exposure to electrical, instrumentation or building systems engineering in EPC or industrial project environments
Excellent communications and interpersonal skills
Attention to detail, management skills
Team-oriented skills, self-motivation, and direction, with strong bias toward timely performance and problem resolution

Job Responsibility

Prepare assigned technical documentation such as basic design of electrical systems (Transformation, Distribution, Lighting, Electrical Protection), Instrumentation (Fire & Gas Detection, Telecom, Monitoring and Regulation), and Automation (particularly, but not limited to, HVAC systems), as well as the technical management of building components and systems
Perform the design of electrical, instrumentation, and automation systems serving residential and industrial buildings, such as drafting specifications and/or reports, performing calculations, and managing the technical procurement of assigned components and systems
Ensure the quality of the documentation produced and its compliance with the contractual requirements of the assigned project
Verify and comment on documents produced by vendors and subcontractors during project development
Interact with other disciplines to acquire useful information for the design of electrical, instrumentation, and automation systems
Collaborate, within the assigned discipline, on the integrated 3D modeling of the building developed using BIM methodology
Collaborate in activities related to work quantity estimation and the preparation of the necessary technical documentation for both project procurement and system implementation
Assist the Building Design Project Leader in preparing the technical documentation required in the Materials Request for Electrical and Instrumentation systems
Follow the development of supplies for Electrical and Instrumentation systems
Support the estimation and quantification activities associated with Electrical and Instrumentation systems

What we offer

Single Status
Accommodation provided by the company
Transportation provided by the company
Round trip ticket on each rotation (Economy class)

Fulltime

Systems Engineer

We are seeking a Systems Engineer to join our team and help establish a robust d...

Location

United States , Mahwah

Salary:

Not provided

Robert Half

Expiration Date

Until further notice

Requirements

Bachelor's degree in Software, Electrical, Mechanical, Systems, or Biomedical Engineering
Minimum of 2+ years of relevant work experience
Working knowledge of requirements and verification practices
Familiarity with requirements management tools
Ability to communicate technical plans and information clearly
INCOSE ASEP or equivalent certification preferred

Job Responsibility

Research, design, develop, modify, and verify medical device systems
Translate user needs into system requirements
Create and refine system architectures and test designs
Contribute to design decomposition using modeling, simulation, budgeting, and mathematical techniques
Support product risk management activities
Develop system architecture for joint replacement instrumentation design controls and risk management
Translate legacy requirements into new requirements for consolidated design controls
Demonstrate advanced understanding of customer needs and design inputs
Gain proficiency in product intended use and clinical procedures
Learn financial model structures related to product development

What we offer

Medical, vision, dental, and life and disability insurance
401(k) plan
Free online training

Fulltime

Lead EIC Engineer

Technical Direction: You define and maintain the technical direction for Electri...

Location

Switzerland , Opfikon, Zurich

Salary:

Not provided

Climeworks

Expiration Date

Until further notice

Requirements

Bachelor’s degree in electrical engineering or equivalent
7+ years of experience in a similar role
Experience in gas processing, mining, minerals processing, water treatment, or equivalent heavy industries
Expertise in low and medium voltage electrical systems, industrial instrumentation, and control systems
Excellent written and verbal communication skills
Ability to liaise with diverse stakeholders, including third-party vendors in IP-sensitive collaborations
Highly organized, able to plan and prioritize work for yourself and others
Comfortable working in fast-paced environments
Fluent in English
Open to travel occasionally

Job Responsibility

Define and maintain the technical direction for Electrical, Instrumentation, and Controls (EIC) across all projects
Develop, update, and enforce EIC engineering standards, specifications, and guidelines to ensure compliance
Provide technical oversight and approval of EIC design deliverables
Lead initiatives to improve reliability and performance of EIC systems
Troubleshoot issues and implement preventive measures
Evaluate and introduce emerging technologies
Act as the primary EIC interface with process, mechanical, and project management teams
Identify and mitigate EIC risks during design and operation phases
Support project teams with scope, cost, and schedule estimates
Supervise and coach junior team members

What we offer

25 paid vacation days every year, plus public holidays
Hybrid work setup
Up to 4 weeks of remote work annually within any EU country
Fair base pay paired with an equity package
Inclusive parental leave
Dedicated budget to invest in your professional growth
Referral rewards

Fulltime

Head of Electrical & Controls Engineering

Lead the electrical power and control systems that bring fusion devices to life,...

Location

United States , Madison

Salary:

Not provided

Realta Fusion Inc.

Expiration Date

Until further notice

Requirements

BS in Electrical Engineering, Controls Engineering, or related discipline. Advanced degree preferred
15+ years electrical/controls engineering experience in power-intensive industries (power generation, accelerators, large-scale research facilities, grid infrastructure)
5+ years leading engineering teams of 5+ people
Track record delivering high-power electrical systems and control architecture from concept through commissioning
Deep expertise in electrical power systems, power electronics, motor drives, and high-voltage systems
Strong background in control systems, instrumentation, data acquisition, and real-time control architecture
Proficiency with electrical design tools (ETAP, SKM, AutoCAD Electrical) and controls platforms (PLC, SCADA, real-time systems)
Experience with high-power systems (MW-scale), electrical safety, and arc flash analysis
Knowledge of electrical codes and standards (NEC, IEEE, NFPA 70E)
Proven ability to lead, mentor, and develop high-performing engineering teams

Job Responsibility

Define electrical and controls engineering strategy from experimental devices through commercial deployment
Own technical decisions for power systems, control architecture, instrumentation, data acquisition, and system integration
Lead design reviews for high-power electrical systems, power supplies, plasma heating systems, and control infrastructure
Partner with physics and other engineering teams to translate requirements into electrical and controls designs
Build, lead, and mentor electrical and controls engineering team
Establish technical standards, design processes, and safety protocols for electrical and controls systems
Recruit top talent and develop engineering capabilities across power systems, controls, and instrumentation
Lead design of electrical distribution, power supplies, plasma heating power systems, and control architecture
Drive integration of electrical systems with mechanical, vacuum, cryogenic, diagnostic, and safety systems
Oversee electrical analysis, controls simulation, and system modeling to validate and optimize designs

What we offer

Competitive compensation package, including equity stock options
Comprehensive benefits including health, dental, and vision insurance, plus a 401(k)
Flexible paid time off (PTO) to support work-life balance

Fulltime