Machine Setup Technician Job at WFA Staffing Group (Pewaukee)

Production Technician I, Fill/Pouch

The Fill/Pouch Production Technician I contributes to Baxter's mission of saving...

Location

United States , Marion

Salary:

44000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma, GED or equivalent
Must be at least 18 years of age
Must have basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Must be able to perform basic mathematics
Proficient in how to use a calculator and measurement tools as well as basic hand tools
Must have basic computer skills
CRC (Career Readiness Certification) at the Silver level preferred
Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc. preferred
Frequent grasping, pushing/pulling and reaching with hands and arms

Job Responsibility

Operate, monitor and make adjustments as necessary to manual and automated filling equipment and machines using controls on an electrical control panel (HMI) or by way of manual adjustments
Set-up, load and replenish production supplies by use of a powered industrial truck (PIT) at a rate consistent with production needs
Perform minor routine and preventative maintenance such as alignment adjustments, replacement of machine parts or belts, cleaning and lubrication while supporting Total Productive Maintenance (TPM)
Reconcile headcount needed on a per shift basis based on schedule production demands
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Inspect finished product to ensure quality standards are being met
Execute Batch/Code changes, tank changes, as well as sub lots as required
Document required information on manufacturing logs and/or POMS system
Investigate, identify and correct or escalate any inefficiency in the machine’s performance including mechanical wear, alignment, adjustment, and setup issues
Develop standard work for troubleshooting and setups/changeovers

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement.

Fulltime

Production Technician - Fill

The Fill Production Technician I is a Salaried Non-Exempt position which contrib...

Location

United States , Marion

Salary:

26400.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma or GED and must be at least 18 years of age
CRC (Career Readiness Certification) at the Silver level preferred
Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc. preferred
Basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Ability to perform basic mathematics
Proficient in how to use a calculator and measurement tools as well as basic hand tools
Basic computer skills

Job Responsibility

Operate, monitor and make adjustments as necessary to manual and automated filling equipment and machines using controls on an electrical control panel (HMI) or by way of manual adjustments
Set-up load and replenish production supplies by use of a powered industrial truck (PIT) at a rate consistent with production needs
Perform minor routine and preventative maintenance such as alignment adjustments, replacement of machine parts or belts, cleaning and lubrication while supporting Total Productive Maintenance (TPM)
Reconcile headcount needed on a per shift basis based on schedule production demands
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Inspect finished product to ensure quality standards are being met
Execute Batch/Code changes, tank changes, as well as sub lots as required
Document required information on manufacturing logs and/or POMS system
Investigate, identify and correct or escalate any inefficiency in the machine’s performance including mechanical wear, alignment, adjustment, and setup issues
Develop standard work for troubleshooting and setups/changeovers

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement

Parttime

Production Technician I

The Fill/Pouch Production Technician I contributes to saving and sustaining live...

Location

United States , Marion

Salary:

41305.58 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

High School Diploma, GED or equivalent
Must be at least 18 years of age
Must have basic English written and oral communication skills adequate to communicate with other team members
Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
Must be able to perform basic mathematics
Proficient in how to use a calculator and measurement tools as well as basic hand tools
Must have basic computer skills
CRC (Career Readiness Certification) at the Silver level preferred
Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc. preferred
This position requires frequent grasping, pushing/pulling and reaching with hands and arms

Job Responsibility

Operate, monitor and make adjustments as necessary to manual and automated filling equipment and machines using controls on an electrical control panel (HMI) or by way of manual adjustments
Set-up, load and replenish production supplies by use of a powered industrial truck (PIT) at a rate consistent with production needs
Perform minor routine and preventative maintenance such as alignment adjustments, replacement of machine parts or belts, cleaning and lubrication while supporting Total Productive Maintenance (TPM)
Reconcile headcount needed on a per shift basis based on schedule production demands
Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
Inspect finished product to ensure quality standards are being met
Execute Batch/Code changes, tank changes, as well as sub lots as required
Document required information on manufacturing logs and/or POMS system
Investigate, identify and correct or escalate any inefficiency in the machine’s performance including mechanical wear, alignment, adjustment, and setup issues
Develop standard work for troubleshooting and setups/changeovers

What we offer

Shift flexibility to trade shifts and leverage overtime opportunities
Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement.

Parttime

New

Tool Room Technician

Operate and setup tool room machinery in accordance to AAM guidelines. Read and ...

Location

United States , Fort Wayne

Salary:

Not provided

American Axle & Manufacturing

Expiration Date

Until further notice

Requirements

Minimum 1 to 3 years work experience in setting up and the operation of CNC lathes and mills
Ability to complete mathematical computations
Ability to read and edit CNC Programs
Experience using measurement equipment (Calipers, micrometers, indicators)
Ability to read and interpret engineering drawings and blueprints
Demonstrate the ability to troubleshoot and have good problem-solving skills
GED or High school diploma Required

Job Responsibility

Operate and setup tool room machinery in accordance to AAM guidelines
Read and interprets blueprints and diagrams as required for machine settings and adjustments
Replace tooling as required
Verify accuracy of machined parts after machine setup to ensure machine is ready for production
Capable of setups through complete processing of advanced forge press tooling components using CNC Turning centers, CNC Milling Machines, Manual Lathes, Manual Surface grinders, CMM
Recognize tool paths by interpreting the program (G and M codes)
Troubleshoot daily problems through root cause analysis techniques as they occur
Coordinate & implement engineering changes
Participate in continuous improvement processes
Implements safety and good housekeeping standards

What we offer

Physical Well-Being: Annual physicals, Preventative Screenings and Immunizations, Diabetes and Hypertension Prevention and Management, Tobacco Coaching, Fertility Benefits
Emotional Well-Being: Employee Assistance Program (EAP), Behavioral Health Network (in-person, virtual/digital), Stress Management and Mediation Programs, Parental Leave Policy
Financial Well-Being: Retirement Readiness, Debt Management, Financial Education and Planning, Lifestyle Account
Social Well-Being: Associate Appreciation Events, Lunch with Leaders

Production Maintenance Technician

Maintenance Technician conducts proactive machine maintenance, shared machine se...

Location

United States , Bolingbrook

Salary:

Not provided

Amsive

Expiration Date

Until further notice

Requirements

Maintenance experience in mailing, packing machines/production machines
Technical knowledge of high-speed production equipment, mechanical/electrical equipment
Good verbal and written communication skills
Must be available to work overtime as business needs require
Strong conflict / issue resolution skills with a strong aptitude for decision-making
English fluency in reading, writing, and speaking required
Bilingual Spanish in reading, writing and speaking preferred
Proficient with internet research, MS Office - Outlook, Word, and Excel
Ability to operate a PC

Job Responsibility

Conducts proactive machine maintenance, shared machine setup, troubleshooting, repairs and preventive maintenance service
Provides proactive support in maintaining production equipment
Works in a team-oriented environment to achieve productivity goals
Performs emergency/unscheduled repairs of production equipment during production
Performs scheduled maintenance repairs of production equipment during machine service
Shares set up responsibilities with operators for scheduled production runs
Requires mechanical skills including mechanical, electrical, pneumatic and hydraulic troubleshooting and repair production machines
Must become knowledgeable with operating system computers on each production machine
Support all production needs as necessary including operating equipment, relieving breaks and lunches and leading and assisting on line changeovers
Reads and interprets equipment manuals, Job tickets and work orders to perform required jobs /maintenance and service

Fulltime

Machine Technician

Join Our Dynamic Onsite Engineering & Facilities Team at IPL Sittingbourne! We a...

Location

United Kingdom , Sittingbourne

Salary:

13.92 GBP / Hour

IPL

Expiration Date

Until further notice

Requirements

FMCG experience in a production/operational environment
Excellent practical skills with strong mechanical aptitude
Educated to GCSE level A, B, or C (or equivalent) in Maths and English
Strong analytical and IT skills, including Word, Excel, and PowerPoint
Excellent communication skills, able to liaise comfortably with all levels within the company
Ability to work quickly and methodically within a team environment
Initiative-driven and results-oriented
Flexible to meet and deliver business needs
High attention to detail

Job Responsibility

Adhere to Standard Operating Procedures in a clean, safe environment
Monitor work areas to ensure safety and maintain machinery cleanliness
Complete daily machine safety checks as per SOPs
Lead autonomous maintenance of equipment, ensuring on and off-line activities are completed
Communicate machine safety issues to the Engineering Team, Line Leaders, and direct reports
Monitor yield to optimise value for IPL
Perform product changeovers safely and efficiently, minimising downtime and identifying improvements
Liaise clearly with Line Leaders to ensure timely machine setups and prompt changeovers
Report machine run rate issues affecting safety or productivity to the Line Leader and Engineer immediately
Conduct mandatory safety and food safety checks

What we offer

15% Asda In-store Discount
Paid Annual Leave Allowance
Enhanced pension scheme
Life Assurance - 4 x annual base salary
Help@hand - Free health and wellbeing support service
Grocery Aid - emotional, practical, and financial support services
Electric Vehicle Scheme
Asda Mobile Discount - 30% off
Discounted health assessments
Asda Pet Insurance discount – Up to 10% Discount

Fulltime

Machine Technician

Join Our Dynamic Onsite Engineering & Facilities Team at IPL Sittingbourne! We a...

Location

United Kingdom , Sittingbourne

Salary:

13.92 GBP / Hour

IPL

Expiration Date

May 19, 2026

Requirements

FMCG experience in a production/operational environment
Excellent practical skills with strong mechanical aptitude
Educated to GCSE level A, B, or C (or equivalent) in Maths and English
Strong analytical and IT skills, including Word, Excel, and PowerPoint
Excellent communication skills, able to liaise comfortably with all levels within the company
Ability to work quickly and methodically within a team environment
Initiative-driven and results-oriented
Flexible to meet and deliver business needs
High attention to detail
Relevant Health & Safety qualification (IOSH) is desirable

Job Responsibility

Adhere to Standard Operating Procedures in a clean, safe environment
Monitor work areas to ensure safety and maintain machinery cleanliness
Complete daily machine safety checks as per SOPs
Lead autonomous maintenance of equipment, ensuring on and off-line activities are completed
Communicate machine safety issues to the Engineering Team, Line Leaders, and direct reports
Monitor yield to optimise value for IPL
Perform product changeovers safely and efficiently, minimising downtime and identifying improvements
Liaise clearly with Line Leaders to ensure timely machine setups and prompt changeovers
Report machine run rate issues affecting safety or productivity to the Line Leader and Engineer immediately
Conduct mandatory safety and food safety checks

What we offer

15% Asda In-store Discount
Paid Annual Leave Allowance
Enhanced pension scheme
Life Assurance - 4 x annual base salary
Help@hand - Free health and wellbeing support service
Grocery Aid - emotional, practical, and financial support
Electric Vehicle Scheme
Asda Mobile Discount - 30% off
Discounted health assessments
Asda Pet Insurance discount – Up to 10% Discount

Fulltime

New

Production Engineer

EssilorLuxottica, a fully integrated player, is a global leader in the design, m...

Location

Thailand , Rayong

Salary:

Not provided

OPSM

Expiration Date

Until further notice

Requirements

Minimum of 3-5 years working experience in engineering/production with a demonstrating Process technical expertise and Analytical skill
Bachelor’s degree in engineering/industrial engineering/chemical or equivalent
Leadership skill, Analytical skill, Project management skill
KPI driven with a structured problem-solving approach
Good Interpersonal Skills with the right communication level including a good English (both written and spoken)
Customer oriented and flexible
Time management
Flexible and work with difference environmental
Comfortable with the Microsoft Office suite

Job Responsibility

Work in a close relationship with the Production team for the Production performances to ensure a smooth daily Production
Work in a close relationship with the Quality team for the Process/Products validation to ensure Products quality
Work in a close relationship with CI & Maintenance team for the machines installations to ensure capacity increase as planned
Manage/evaluate the Process Technicians
Contribute to the capacity increase = machines installation, setup and validation with with CI/Maintenance and Quality the handover to Production (PCP, SOP, ..)
Benchmark the Process/Production practices with the other entities group and identify/put in place the best practices and participate in Techno clubs
Comply company rules, safety, environment, and quality standards and policy such ISO 9001,ISO 14001& ISO 45001

Machine Setup Technician

WFA Staffing Group

Location:
United States , Pewaukee

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
December 13, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Machine Setup Technician

Production Technician I, Fill/Pouch

Production Technician - Fill

Production Technician I

Tool Room Technician

Production Maintenance Technician

Machine Technician

Machine Technician

Production Engineer

Machine Setup Technician

WFA Staffing Group

Location:United States , Pewaukee

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:December 13, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Machine Setup Technician

Production Technician I, Fill/Pouch

Production Technician - Fill

Production Technician I

Tool Room Technician

Production Maintenance Technician

Machine Technician

Machine Technician

Production Engineer

Location:
United States , Pewaukee

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
December 13, 2025