Machine Operator 1st Shift Job at The Catania Oils (Ayer)

Machine Operator (CNC Mazak) 1st Shift

The Machine CNC Operator - Mazak (1st shift) operates machines that finish the e...

Location

United States , Greencastle

Salary:

17.80 USD / Hour

ASC Engineered Solutions

Expiration Date

Until further notice

Requirements

Ability to read tape measure
Requires constant standing and walking (up to 10 hours per day)
Repetitive use of both hands (up to 10 hours per day)
Requires repetitive twisting
Repetitive reaching at and above shoulder level and bending at the waist
Working with water soluble coolant
An awareness of exposed cuttings and moving parts on the machine
Lifting up to 30 lbs.

Job Responsibility

Operates machines that finish the ends of pipes
Responsible for producing a quality product
Setting machines properly for the right diameter and length of pipe
Loading the machines with pieces of pipe (cut blanks)
May be responsible for running multiple machines
Maintaining a clean and safe machine and work area
Performing required maintenance checks
Keeping accurate production records in the computer planning system
Meeting established production standards.

What we offer

Health benefits
401k
Paid Holidays
Paid Vacation after 90days
Personal time after 90days

Fulltime

1st Shift Machine Operator III

Under general supervision of the Production Lead, ensure machines are working at...

Location

United States , Oakland

Salary:

Not provided

Ajinomoto Foods North America, Inc.

Expiration Date

Until further notice

Requirements

High School Diploma or equivalent
Minimum of 1 year manufacturing operator experience
Ability to manage multiple priorities, utilizing basic math skills and auditing paperwork
Ability to effectively adapt to change
Ability to read, write, and speak English
Ability to stand for long periods of time
to work in confined areas, to lift up to 50 lbs. or more
Must be able to work overtime and week-ends as necessary

Job Responsibility

Follow Good Manufacturing Practices (GMPs) at all times
Perform line set up, start up, operations, closing and changeover of equipment
Ensure product quality are met throughout process
Performs checks and inspections to verify quality
Performs adjustments as necessary
Performs machine setups in accordance to applicable procedures and setup sheets
Accurately completes and maintains all production records
Responsible for reporting problems to department lead
Adequate housekeeping at all times during shift, creating an organized layout for all personnel
Review and assure appropriate adherence with quality, safety policies and procedures

Fulltime

1st Shift Material Handler

Alro Steel, a family-owned company, is currently seeking 1st Shift Material Hand...

Location

United States , Grand Rapids

Salary:

17.50 USD / Hour

Alro

Expiration Date

Until further notice

Requirements

previous experience in a machine shop or metal distribution (preferred)
light machine operation experience (preferred)
excellent attendance
safe work habits
computer and keyboard skill development
a record of accurate order fulfillment

Job Responsibility

filling and preparing material orders for shipment to customers
operation of overhead cranes, forklifts, metal saws, shears, and lasers

What we offer

Outstanding low cost 90/10 Healthcare Benefits after 30 days of employment
Medical/Dental/Vision/Prescription
Competitive compensation paid weekly
retirement savings plan
flexible spending accounts
paid parental leave
bereavement
disability insurance
Paid vacation and holidays
Extensive upfront training and ongoing mentoring

Fulltime

1st Shift Material Handler

Alro Steel, a family-owned company, is currently seeking 1st Shift Material Hand...

Location

United States , Pensacola

Salary:

Not provided

Alro

Expiration Date

Until further notice

Requirements

previous experience in a machine shop or metal distribution (preferred)
light machine operation experience (preferred)
excellent attendance
safe work habits
computer and keyboard skill development
a record of accurate order fulfillment

Job Responsibility

filling and preparing material orders for shipment to customers
operation of overhead cranes, forklifts, metal saws, shears, and lasers

What we offer

Outstanding low cost 90/10 Healthcare Benefits after 30 days of employment
Medical/Dental/Vision/Prescription
Competitive compensation paid weekly
retirement savings plan
flexible spending accounts
paid parental leave
bereavement, and disability insurance
Paid vacation and holidays
Extensive upfront training and ongoing mentoring
Opportunities to grow and advance

Fulltime

1st shift paint line clerk

This position will be responsible in addition to the Paint General Laborer tasks...

Location

United States , Lower Nazareth

Salary:

Not provided

Victaulic

Expiration Date

Until further notice

Requirements

Ability to follow standard work procedures and instructions
Loading and unloading parts from baskets & racks
Competent in material handling moves with all fork trucks in paint department
Able to transfer different container types (ex. TF tubs to standard trays)
Ability to weight count parts with scale and understanding of packout process
Capable of clearing machine faults (RSC and TTX)
Highly skilled in identifying parts and defects
Complete understanding of Kanban cards, including usage points, supply points, part codes, & descriptions
Understanding of attainment sheets and shift documentation
Uses magnetic articulating arm for heavier castings and capable of clearing faults

Job Responsibility

Monitoring RSC material handling system: Ensuring that it sends enough baskets/racks to keep the TTX system fed and prevents hoists from waiting to meet production targets on loads/hour
Clearing faults and manually jogging system as needed
Removing debris and/or mixed parts from baskets before they are sent to the TTX system
Adjusting number of passes on vibratory conveyor as needed
Loading/Unloading manually loaded baskets/racks from Zone 9
Communicating unfamiliar issues to supervisor/engineering/maintenance staff
Clearing faults on TTX system: Clearing hoist faults and jogging them as needed to clear certain issues
Clearing conveyor faults in the oven and communicating unfamiliar oven sequencing issues to supervisor/engineering/maintenance staff
Communicating unfamiliar faults to supervisor/engineering/maintenance staff
Taking notes accurately throughout the shift to document any downtime on either system. Fill out and submit daily clerk checklist sheet

What we offer

Opportunity for growth and Innovation
VPP World Class Safety Program
Company Events
Company Matched 401k Plan
Comprehensive Healthcare Benefits
Employee Assistance Program
Education Assistance / Tuition Reimbursement Program
Wellness Program
Medical
Vision

Fulltime

Maintenance Mechanic 1st Class

The purpose of the Maintenance Mechanic 1st Class is to perform as professional,...

Location

United States , Houston

Salary:

39.54 USD / Hour

Owens Corning

Expiration Date

Until further notice

Requirements

High School Diploma or GED Equivalent required
Manufacturing or process related experience preferred
Preferably five (5) years in a related maintenance trade or occupation that involved electrical, hydraulic machinery and equipment in a manufacturing environment
Able to demonstrate trouble-shooting techniques and have a advanced understanding of blueprints
Advanced ability and knowledge of welding practices and hydraulic circuitry
Advanced understanding of electrical circuitry
Advanced PLC knowledge
Must have the ability to interpret instructions furnished in written, oral, diagram or schedule form
Flair for working with large industrial machines
Must be able to work independently or in a team atmosphere with minimal direct supervision with drive toward accomplishment, and to produce high quality work

Job Responsibility

Lives the Owens Corning Safety Stand and meets all safety requirements
Take personal ownership to work safely and hold other team members to the same high standards of safety
Notify supervisor immediately of any accident, near miss or on- the -job injury
Participates in the safety, quality, autonomous maintenance, TPM and housekeeping programs as established within the plant
Performs job tasks to reduce environmental impact and adheres to the environmental regulations and recycling procedures for waste disposal
Performs cleanup duties at workstations and/or equipment/machinery
Communicates safety concerns and/or equipment problems/abnormalities to appropriate personnel
Inspect vehicles before use and throughout shift, keeping all equipment clean and operational
Participates in plant TPM initiatives - completing activities associated with TPM tasks
Continues to use TPM methodology to gain a better understanding of the equipment

Fulltime

Defense - Sheet Metal Mechanic

This role is at Spirit AeroSystems, Inc., a wholly owned subsidiary of The Boein...

Location

United States , Wichita

Salary:

23.66 - 39.32 USD / Hour

Boeing

Expiration Date

Until further notice

Requirements

Must be able to obtain and maintain a DoD security clearance
At least 6 months of experience or transferrable skills
Willingness to work assigned shift and overtime as required
Ability to work on concrete floors, uneven surfaces, and in confined spaces
Ability to walk on open floor beams, climb on stairs/scaffolding, crawl/kneel in workstation, and lift/move parts and/or tools
Willing and able to be flexible and work 1st or 2nd shift, including alternative work weeks
Must pass the WorkKeys Assessment or provide verification of having passed it
Must present two forms of ID for WorkKeys Assessment

Job Responsibility

Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures
Functional test and correct, fit form and function of assemblies and components
Obtain required information from prints, charts, sketches, work instructions, documents, verbal and electronic information
Use shop mathematics and precision measuring and or test instruments to complete work assignments and functional test assemblies and components
Utilize tooling in the assembly of components into sub-assemblies or end items
Verify work performed is per work instructions and meets process and/or engineering specification
Identify discrepancies found per applicable procedure
Ensure equipment and tool certification occurs per procedure
Perform routine minor machine maintenance as part of their daily work duties
Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required, and complete transactions necessary to move product to the next operation

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
Eligible for a $5,000 state of Kansas Aviation tax credit for up to five years

Fulltime

Mechanic First Class

The Minneapolis Roofing Plant Electrical Technician coordinates and safely execu...

Location

United States , Minneapolis

Salary:

46.93 USD / Hour

Owens Corning

Expiration Date

Until further notice

Requirements

High School Diploma or GED Equivalent required
Associate's degree, or higher preferred
Minimum of 4-year experience in a Maintenance team with relevant experience. Preferably as a Electrical or Multi-Trade Technician
Manufacturing or process related experience
Demonstrated leadership in professional, service, or social organizations
Willingness and flexibility to relocate
Must be able to work 1st, 2nd, or 3rd shift as directed by Maintenance Leader
Manufacturing Maintenance experience or completion of an Advanced Manufacturing program from an accredited school
Proficient in Microsoft Office (Work, Excel, and PowerPoint)
AutoCAD, SolidWorks experience is preferred

Job Responsibility

Comply with all Lock-Tag-Try (LTT) procedures
Fix and report all unsafe work conditions
Notify member of Minneapolis Leadership Team in the case of any accident, near miss, or on-the-job injury
Oversees shift activities, downtime, and shop with respect to electrical work request, downtime lists and assigned projects
Instructs craftsmen in proper electrical installation and repair techniques as appropriate
Plans electrical preventive maintenance strategies to minimize equipment downtime
Responsible for the maintenance of all electrical shop equipment
Inspects electrical work in progress to ensure correct labor utilization and evaluate electrical training requirements
Completes training plan based on qualifying test score
Supports in-house and contracted electrical installations or repairs in the facility

What we offer

insurance (medical/dental/vision/life/disability/supplemental offerings)
401k (company contribution regardless of employee participation – plus match)
liberal paid time off (vacation, personal floating and standard holidays)
Employee Assistance Services
Stock Purchase Program

Fulltime

Machine Operator 1st Shift

The Catania Oils

Location:
United States , Ayer

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 20, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Machine Operator 1st Shift

Machine Operator (CNC Mazak) 1st Shift

1st Shift Machine Operator III

1st Shift Material Handler

1st Shift Material Handler

1st shift paint line clerk

Maintenance Mechanic 1st Class

Defense - Sheet Metal Mechanic

Mechanic First Class

Machine Operator 1st Shift

The Catania Oils

Location:United States , Ayer

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 20, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Machine Operator 1st Shift

Machine Operator (CNC Mazak) 1st Shift

1st Shift Machine Operator III

1st Shift Material Handler

1st Shift Material Handler

1st shift paint line clerk

Maintenance Mechanic 1st Class

Defense - Sheet Metal Mechanic

Mechanic First Class

Location:
United States , Ayer

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
January 20, 2026