Lead Avionics Verification Engineer Job at Airbus (Bangalore)

Electrical and Avionics Systems Engineer

ITPS is seeking a full-time Electrical Engineer to join our engineering team in ...

Location

Canada , London, Ontario

Salary:

Not provided

ITPS (CANADA) LTD

Expiration Date

Until further notice

Requirements

Solid understanding of aircraft electrical systems, power distribution, and signal integrity
Hands-on experience with avionics interfaces and protocols: ARINC 429, RS-232/422/485, CAN bus
Experience with LRU integration, signal routing, grounding/shielding practices, and EMI/EMC considerations
Ability to work with aircraft sensors (AHRS, IMUs, magnetometers, electro-optical payloads) and mission/display computers
Familiarity with technical drawing tools (e.g., MS Visio, Enovia) and engineering design platforms
Understanding of regulatory and airworthiness documentation standards in aerospace systems
Proficiency with tools such as: MS Office, Navision, Enovia, ARINC scheduling software
Experience with Matlab or IADS for system analysis and data visualization

Job Responsibility

Lead design and development of aircraft electrical systems from concept to production
Prepare and maintain engineering documentation: I/O definitions, schematics, interface control documents (ICDs), wiring diagrams
Design and review custom PCB layouts and avionics harnessing
Oversee component selection, BOM management, and procurement coordination
Plan and conduct bench-level and on-aircraft testing, including functional verification, continuity checks, and system validation
Collaborate with avionics, flight test, and systems teams for seamless integration into flight platforms
Provide technical support during installation, troubleshooting, and acceptance testing phases

Fulltime

Subject-Matter Expert Avionics Engineer

Phalanx Griffon (PG) is the Air Force’s open‑architecture airborne node linking ...

Location

United States , Dayton

Salary:

Not provided

DCS Corporation

Expiration Date

Until further notice

Requirements

U.S. Citizenship
Active TS/SCI clearance
High School Diploma plus 20 years of experience
Must have been directly involved with avionics engineering and have focused on this technical area for over 20 years
has published work or work samples showing that they are an expert in this field
have participated in technical presentations/roadshows/conferences as an expert in their respective field
Expert knowledge of MIL‑STD‑1553, ARINC‑429/664, Ethernet (TSN/AFDX), VPX architectures, and timing/synchronization methods
Demonstrated success integrating Type‑1 crypto, SATCOM/RF subsystems, and open mission systems (OMS/UCI, FACE, SOSA)
Hands‑on experience generating airworthiness artifacts and guiding systems through developmental & operational test
Proficiency with avionics E‑CAD and MBSE tools (CAMEO/MagicDraw, Rhapsody, Altium/OrCAD)

Job Responsibility

Define avionics integration schemes that marry Nomad VPX hardware with platform data buses (MIL‑STD‑1553, ARINC‑429/664, Ethernet TSN) and mission computers
Develop interface‑control documents (ICDs), signal‑flow diagrams, and timing budgets
ensure alignment with OMS/UCI messages and cross‑domain guard rules
Lead authoring of AF Form 1067s, E‑series flight‑clearance packages, and safety‑of‑flight analyses
Oversee DO‑254 (hardware) & DO‑178C (software) compliance artifacts where required
Capture avionics models in SysML/CAMEO and link to requirements, verification methods, and hardware part trees
Drive configuration‑control boards, red‑line incorporation, and model synchronization
Specify and validate wiring harnesses, signal conditioning, and power interfaces in the Integration SIL
Troubleshoot EMI/EMC, timing, and protocol issues
guide corrective actions through to flight‑test readiness

Fulltime

Hardware Integration Engineer

Merlin is a venture backed aerospace startup building a non-human pilot to enabl...

Location

United States

Salary:

Not provided

Merlin Labs

Expiration Date

Until further notice

Requirements

BS in Electrical or Aerospace Engineering
10+ years of relevant systems level electrical systems and integration design experience for the aviation, aerospace, industries
Experience integrating and testing avionics systems
Experience with component specification, supplier interaction, and procurement processes
Experience integrating and debugging systems containing COTS/MOTS modules, custom circuits, software, sensors, and human / machine / graphical user interfaces
Working knowledge of integrating various components using standard interface protocols such as ARINC 429, RS-232, RS-422, and RS-485
Familiarity with lab test equipment, including oscilloscopes, multimeters, current probes, data acquisition, and bus analyzers
Experience with wire harness design and connector component selection and sourcing
Outstanding organization, analytical, and problem-solving skills
Excellent written, verbal, and presentation communication skills

Job Responsibility

Lead and perform avionics systems integration and testing of components of our aircraft autonomy system
Write and maintain electrical systems requirements documents, electrical load analyses, and other related documents for prototyping and certification
Write, maintain and execute test plans and design verification documents
Specify, identify, integrate and verify Commercial/Modified-Off-the-Shelf (COTS/MOTS) electronic subsystems for aircraft installation
Prepare and release electrical design and fabrication documentation for partners, vendors, and customers
Work with suppliers, managing their performance to requirements, budget and schedule
Provide guidance to other electrical engineers and technicians across the team working on electrical and electronic aspects of the system architecture and schematics including power, computer, electro-mechanical, interconnect systems, wireless communications, cable harnesses, packaging, cable routing, and user interfaces and controls
This position may require up to 50% travel to both domestic and international locations to support hardware integration

What we offer

health
dental
life
unlimited vacation
401k with match

Fulltime

Avionics Systems Architect

This position is opened in the Avionics and Systems Architecture Department with...

Location

France , Marignane

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Engineer in Avionics, or Electronics or Systems Engineering
Experience: 5-10 years or more
Languages: Fluent in French and English
Rigorous and methodic
Customer satisfaction oriented
Open-minded and welcome problems attitude
Dynamic and having a strong team spirit mindset
Able to work in complex environments and to manage easily priorities/urgencies
Transparent and report issue as soon as it appears
Positive and constructive

Job Responsibility

Anticipate future needs and possible avionics solutions
Ensure retrofit & upgrades of our fleet in service
Keep our avionics up-to-date
Define, develop and certify the most effective avionics solutions
Participate to avionics strategy at system level
Contribute to technology roadmaps
Contribute to System Engineering set-up for Avionics
Manage transverse functions
Collect stakeholders needs
Define operational concepts and use-cases for the overall avionics

What we offer

Attractive salary
Agreements on success and profit sharing schemes
Employee savings plan abounded by Airbus
Employee stock purchase plan on a voluntary basis
Extra days-off for special occasions
Holiday transfer option
Staff council offering many social, cultural and sport activities and other services
Complementary health insurance coverage (disability, invalidity, death)
Depending on the site: health services center, concierge services, gym, carpooling application
Great upskilling opportunities and development prospects with unlimited access to +10.000 e-learning courses

Fulltime

Avionics Systems Architect

This position is opened in the Avionics and Systems Architecture Department with...

Location

France , Marignane

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Engineer in Avionics, or Electronics or Systems Engineering
Experience: 5-10 years or more
Languages: Fluent in French and English
Rigorous and methodic
Customer satisfaction oriented
Open-minded and welcome problems attitude
Dynamic and having a strong team spirit mindset
Able to work in complex environments and to manage easily priorities/urgencies
Transparent and report issue as soon as it appears
Positive and constructive

Job Responsibility

Anticipate future needs and possible avionics solutions, from concept analysis up to feasibility during Research and Pre-Dev stages
Ensure retrofit & upgrades of our fleet in service
Keep our avionics up-to-date (obsolescence solving, avionics improvements, introduction of new capabilities/features), in the frame of future developments
Define, develop and certify the most effective avionics solutions
Participate to avionics strategy at system level
Contribute to technology roadmaps
Contribute to System Engineering set-up for Avionics (process, methods & tools)
Manage transverse functions
Collect stakeholders needs (from Projects/Programs, Marketing, Support, end-users and customers)
Define operational concepts and use-cases for the overall avionics

What we offer

Financial rewards: Attractive salary, agreements on success and profit sharing schemes, employee savings plan abounded by Airbus and employee stock purchase plan on a voluntary basis
Work / Life Balance: Extra days-off for special occasions, holiday transfer option, a Staff council offering many social, cultural and sport activities and other services
Wellbeing / Health: Complementary health insurance coverage (disability, invalidity, death). Depending on the site: health services center, concierge services, gym, carpooling application
Individual development: Great upskilling opportunities and development prospects with unlimited access to +10.000 e-learning courses to develop your employability, certifications, expert career path, accelerated development programmes, national and international mobility
Flexible working arrangements

Fulltime

New

Lighting Design Engineer

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

Germany , Hamburg

Salary:

Not provided

Boeing

Expiration Date

March 31, 2026

Requirements

Bachelor’s degree in engineering (Electrical, Avionics, Aerospace, Aeronautical, Mechanical and Manufacturing Engineering) or higher degree in engineering
Experience in leading a cross-functional/integrated product team
5+ years of experience in aerospace interiors, lighting technology, materials properties, design criteria, integration, certification (CS/FAR 25), and release processes acquired by working directly with/for aerospace suppliers, airlines, or regulators
Knowledge of optics and lighting system design including the use of optical modeling & simulation tools, such as SPEOS, ASAP, or LightTools, as well as photometric & radiometric verification methods and equipment
5+ years of experience in program or project management, leading project and/or program proposals of varying complexity (including development and execution of schedule milestones, resource assessments, risk and/or issues management)
Familiarity with Design for Manufacturing (DfM) principles, including experience with electronics manufacturing methods
and with the challenges of addressing component obsolescence and qualifying replacement lighting products for legacy lighting technologies
Experience applying Systems Engineering processes for functional architecture definition & decomposition, requirements definition & validation, verification planning, and safety assessments
You are experienced in leading complex projects including influencing team members and stakeholders (suppliers, customers, solution providers) involved and are willing to help develop, mentor and coach less experienced staff
You are a principled, reliable professional who values integrity, safety and accountability, always striving for the highest standards of quality and ethical conduct. Inclusive and collaborative by nature, you communicate transparently, respect diverse perspectives and take ownership to drive results the right way

Job Responsibility

Define, develop, and document aircraft interior lighting system architectures and requirements, covering general lighting, emergency lighting, lighting scenes, and passenger information signs
Perform and approve analyses, simulations, and test activities to validate and verify lighting systems and components meet technical, safety, and regulatory requirements
Design and integrate interior lighting systems and components using 3D CAD, optical modeling and simulation tools, and electrical/mechanical integration methods across the product lifecycle
Lead technical coordination with suppliers and cross-functional engineering teams, ensuring design maturity, qualification, certification, production readiness, and compliance with Boeing and customer requirements
Ensure regulatory compliance and technical robustness, addressing regulatory changes (e.g., RoHS restriction on mercury within the EU, Minamata Convention in Japan), managing technical risks, and assessing emerging lighting technologies for future aircraft applications

What we offer

Vacation: 32 vacation days
Personal Time Off: 2 paid days for emergencies, 2 for your wedding, 1 for moving, and 3 for bereavement
Pension Plan: 13 monthly payments and flexible contribution options
Life & Disability Insurance: 2x your annual salary in life insurance and 1x for total occupational disability
Sick Leave Salary Gap Insurance: income protection during sick leave, covering the gap between social security pay and your salary
Global Travel Coverage & International SOS Assistance: global insurance for all your business trips
Medical Benefits Abroad: protection in medical emergencies
Career Advancement Opportunities: Learning Together Program supports degrees, MBAs, and certifications
Comprehensive Wellness Support: Employee Assistance & Well-Being programs

Fulltime

New

Avionics Lead Engineer

The jobholder will be responsible for design & development, verification & valid...

Location

India , Bangalore Area

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Experience in full software lifecycle encompassing Software requirements Definition, Dynamic & Static Design, Coding and verification activities in industrialised domains
Hands on experience on Embedded software requirements engineering and Architecture (Static and Dynamic)
Hands on experience on Design and development (module level design, interfaces, algorithm)
Hands on experience on Embedded Programming
Hands on experience on Unit and integration testing (host & target environment)
Hands on experience on Software configuration management
Knowledge about standards (requirements / design / coding)
Basic understanding about RTOS
Strong inter personnel skills
Quick learner

Job Responsibility

Design & development, verification & validation of Safety critical Real time Embedded software for avionics application conforming to DO 178 B/C standard for Avionics Airbus Helicopters
Design and implementation of Software Modules
Spearhead the requirement engineering activity (gather system requirements, analyse and document software requirements)
Design and implementation of Software Configuration
Coordinate with stakeholders in resolving technical issues - Troubleshooting issues reported by System testing & Simulator testing, Flight Test, In-service Issues
Unit level verification of software modules
Integration testing (software – software & software – Hardware)
Lead and mentor a team for design/dev/ testing/Interface activities

Fulltime

Lead Firmware Engineer - Aerospace

Responsible for designing, developing, verifying, and maintaining safety-critica...

Location

United States , Phoenix

Salary:

Not provided

Real Time Consulting

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Electrical Engineering or Computer Engineering and minimum 9 years of prior relevant experience, or Graduate Degree and a minimum of 7 years of prior related experience
Minimum 6 years of prior relevant experience in an engineering discipline with systems engineering principles, including requirements definition, requirements verification, design reviews and documentation, integration, test, and demonstration
Minimum 7 years’ experience with FPGA and firmware design
Hands-on experience designing and developing avionics products, RF, or sensor systems
Experience with Xilinx and Microchip FPGAs along with associated tools (ISE, Vivado, Libero)
Experience with simulation tools (Active HDL/QuestaSim)
Must be knowledgeable in VHDL and/or Verilog RTL coding
Knowledge of DO-254 Airborne Electronic Hardware development lifecycle
Experience with requirements-based verification
Excellent people skills, with experience leading and collaborating in a multi-disciplinary, diverse, and dynamic team environment

Job Responsibility

Responsible for designing, developing, verifying, and maintaining safety-critical firmware for avionics and embedded systems for TCAS and transponder applications in compliance with DO-254 standards
Work closely with hardware engineers, system architects, and certification authorities to ensure robust design assurance processes are followed throughout the product lifecycle
Involved with multidisciplinary project teams involving mechanical, electrical, digital/analog, RF, firmware, and software engineering in planning, designing, prototyping, and testing of avionics systems
Responsible for mentorship of junior engineers, as well as ensuring the Surveillance product line follows industry best practices for product development
The design focus will include surveillance avionics for Air Transport, as well as General Aviation and emerging platforms, such as Urban Air Mobility (UAM) eVTOL aircraft

Lead Avionics Verification Engineer

Airbus

Location:
India , Bangalore

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
February 17, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Lead Avionics Verification Engineer

Electrical and Avionics Systems Engineer

Subject-Matter Expert Avionics Engineer

Hardware Integration Engineer

Avionics Systems Architect

Avionics Systems Architect

Lighting Design Engineer

Avionics Lead Engineer

Lead Firmware Engineer - Aerospace

Lead Avionics Verification Engineer

Airbus

Location:India , Bangalore

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:February 17, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Lead Avionics Verification Engineer

Electrical and Avionics Systems Engineer

Subject-Matter Expert Avionics Engineer

Hardware Integration Engineer

Avionics Systems Architect

Avionics Systems Architect

Lighting Design Engineer

Avionics Lead Engineer

Lead Firmware Engineer - Aerospace

Location:
India , Bangalore

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
February 17, 2026