Jet Engine Mechanic Job at Randstad (Steenokkerzeel)

Airframe & Powerplant (A&P) Technician

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Opa Locka

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Airframe & Powerplant Certificate
Typically, a minimum of 2 years aircraft maintenance experience or substantiated equivalent experience
Experience on corporate jet aircraft (preferred)
Ability to interpret and work with mechanical engineering drawings
Ability to effectively communicate in both written and verbal form on individual and / or aircraft status
Own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
Must obtain appropriate Ground Support Equipment Qualifications as required
Ability to work unscheduled overtime including nonscheduled workdays and holidays
Ability to work in seasonal/inclement weather outside
Ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)

Job Responsibility

Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hangar positions)
Comply with Environmental / Health / Safety policies and procedures. Participate in 5-S activities. Perform all work in a safe and timely manner
Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required
Perform mechanical / electrical removals and installations
Perform other duties as assigned
May assist with maintenance at off-site locations
Assist other maintenance disciplines
Assist with fuel and / or de-fuel of aircraft

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program
This position may be eligible for up to a $5,000.00 sign-on bonus! (Terms and Conditions Apply)

Fulltime

Airframe & Powerplant (A&P) Technician

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Opa Locka

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Airframe & Powerplant Certificate
Typically, a minimum of 2 years aircraft maintenance experience or substantiated equivalent experience
Experience on corporate jet aircraft (preferred)
Ability to interpret and work with mechanical engineering drawings
Ability to effectively communicate in both written and verbal form on individual and / or aircraft status
Own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
Must obtain appropriate Ground Support Equipment Qualifications as required
Ability to work unscheduled overtime including nonscheduled workdays and holidays
Ability to work in seasonal/inclement weather outside
Ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)

Job Responsibility

Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hangar positions)
Comply with Environmental / Health / Safety policies and procedures. Participate in 5-S activities. Perform all work in a safe and timely manner
Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required
Perform mechanical / electrical removals and installations
Perform other duties as assigned
May assist with maintenance at off-site locations
Assist other maintenance disciplines
Assist with fuel and / or de-fuel of aircraft

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program
This position may be eligible for up to a $5,000.00 sign-on bonus! (Terms and Conditions Apply)
When applicable, Bombardier promotes flexible and hybrid work policies

Fulltime

Manager, Process Module Engineering (Packaging Engineering)

To lead Die Attach Process Module Engineering team for Process/Materials Develop...

Location

Malaysia , Batu Kawan, Penang

Salary:

Not provided

Sandisk

Expiration Date

Until further notice

Requirements

Master Degree or PhD in Materials Engineering / Mechanical Engineering / Physics / Micro-electronics
Strong hands-on experience Packaging technology development experience and well-versed with structured R&D methodology
Strong experience in driving technology roadmap and technology innovation to achieve best-in-class advanced packaging technology solutions
Minimum 10 years of Semiconductor Packaging Process with in-depth knowledge on IC packaging processes, high-density / ultra-thin die stacking technology development hands-on & indepth exposure
Proven capabilities to navigate through highly dynamic and fast-paced project requirements and interdependencies
Ability to lead complex technical investigation and analysis with global cross-functional teams
Ability to work with internal development / HVM teams and suppliers on process qualification and co-development

Job Responsibility

To lead Die Attach Process Module Engineering team for Process/Materials Development, Qualification and Transfer to HVM
Responsible for Key technology development & tech-staging to drive and enable product, process and materials technology roadmap solutions for next generation memory storage packaging solutions
To lead or co-lead Development JET (Joint Engineering Team) with global cross-functional teams incl. process, materials, CPI, package design, thermal-mechanical simulation, quality and other related stakeholders
To build and nurture strong process development team related to high density ultra-thin die attach process, material and packaging architecture - emphasizing deep engineering fundamental, structured methodology and DOE planning / execution / analysis
To lead studies related to in-depth fundamental investigation/characterization in packaging development
Ensure strong materials to process/design compatibility to meet stringent quality and reliability requirements from customers and industry standards
To co-drive material technology roadmap definition and path finding/development programs with global cross-functional teams including product design, process engineering, lab characterization teams and test engineering in delivering Best-In-Class and Industry leading products
To lead and drive collaboration with strategic equipment & material suppliers, service providers, academia, industry consortium in collaboration projects or co-development activities
To drive breakthrough in product packaging materials and process
To support IR5.0 Digital Transformation for Packaging process e.g. Process Digital Twins, Advanced Process Control (APC), Fault Detection Control (FDC), fundamental lab characterization and design rules definition

Fulltime

Aircraft Mechanic UH 60L

Astrion has an exciting opportunity for a Aircraft Mechanic UH 60L located at Ft...

Location

United States , Fort Moore

Salary:

Not provided

Astrion

Expiration Date

Until further notice

Requirements

High School Diploma
Two (2) years’ experience with documented training on the Model, Designation, Series (MDS) H60 series, or have a current (valid) FAA A&P license and at least one (1) years of documented experience in general aviation
Must climb, stand, stoop, bend, stretch, crouch, and work in tiring and uncomfortable positions
Must operate manual tools and power tools
Color Vision
Hearing
Frequently lifts parts and equipment up to 20 pounds
Occasionally lifts objects up to 50 pounds
Most heavy lifting is accomplished using mechanical devices
Work area is primarily aircraft areas, hangars, workshops, and other industrial settings

Job Responsibility

Removes and installs aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components
Services and lubricates aircraft and subsystems
Safely prepares aircraft for inspections and maintenance checks and services performs scheduled inspections and assists in performing special inspections
Performs limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required
Uses and performs operator maintenance on tools, special tools, and aircraft ground support equipment
Apply comprehensive technical expertise to solve moderate problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives
Removes, inspects and replaces aircraft structures, such as Main and Tail Rotor systems, flight control systems, Main and APU Engines, Hydraulic pumps and sub-systems, Main Drive Transmissions (Main/Intermediate/Tail/Input/Accessory Gear boxes) and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills
Mechanic uses calibrated tools daily to execute required work
Uses a working knowledge of technical publications and the Government STAMIS to make entries in aircraft logs and records
Reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components

What we offer

Competitive salaries
Continuing education assistance
Professional development
Multiple healthcare benefits package options
401K with employer matching
Competitive time off policy along with a federally recognized holiday schedule

Fulltime

Aircraft Mechanic w/ Respirator Certification

Astrion has an exciting opportunity for a Aircraft Mechanic 1 –Avionics/Electric...

Location

United States , Fort Moore

Salary:

Not provided

Astrion

Expiration Date

Until further notice

Requirements

Valid driver license
Minimum two (2) years experience with documented training on the MDA H 60 series
Or current (valid) FAA A&P license and one documented experience
Specialty in Avionics/Electrical or Sheetmetal and two years of experience with documentation

Job Responsibility

Removes and installs aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components
Services and lubricates aircraft and subsystems
Safely prepares aircraft for inspections and maintenance checks and services performs scheduled inspections and assists in performing special inspections
Performs limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required
Uses and performs operator maintenance on tools, special tools, and aircraft ground support equipment
Apply comprehensive technical expertise to solve moderate problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives
Removes, inspects and replaces aircraft structures, such as Main and Tail Rotor systems, flight control systems, Main and APU Engines, Hydraulic pumps and sub-systems, Main Drive Transmissions (Main/Intermediate/Tail/Input/Accessory Gear boxes) and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills
Mechanic uses calibrated tools daily to execute required work
Uses a working knowledge of technical publications and the Government STAMIS to make entries in aircraft logs and records
Reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components

What we offer

Competitive salaries
Continuing education assistance
Professional development
Multiple healthcare benefits package options
401K with employer matching
Competitive time off policy along with a federally recognized holiday schedule

Fulltime

R&D Intern

ATI is seeking to hire a Research and Development Intern for our Summer 2026 Int...

Location

United States , Cudahy

Salary:

Not provided

ATI

Expiration Date

Until further notice

Requirements

Must be a sophomore or above in college
Pursuing a degree in Mechanical or Materials Engineering or related degree
Able to report onsite to Cudahy for a June 2nd, 2025 Start Date

Job Responsibility

Analyze mechanical property data for customer reports
Review processing data to support material investigations
Learn about our operations in manufacturing critical components for aerospace and heavy industrial application
Assist our Design Engineers with project and R&D support
Work on projects related to critical forging and heat treatment operations in producing the jet-engine components

What we offer

Relocation and housing assistance is available for the summer
Experiential Learning: Hands on work assignments and projects related to your career field of interest
Professional Development: Curriculum designed to develop your business acumen and professional skills
Professional Networking: Planned events meant to give you informal networking opportunities with other interns and employees

Parttime

Lead Technician, Airframe & Powerplant (A&P)

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Windsor Locks

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Typically, a minimum of 5 years aircraft maintenance work experience or substantiated equivalent experience
Typically, a minimum of 1 year corporate / commercial jet experience
Current, and valid, FAA Airframe and Powerplant (A&P) Certificate
Basic PC skills
Ability to interpret and work with mechanical engineering drawings
Ability to effectively communicate in both written and verbal form on individual and / or aircraft status
Own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
Must obtain appropriate Ground Support Equipment Qualifications as required
Ability to work unscheduled overtime including nonscheduled workdays and holidays
Ability to work in seasonal/inclement weather outside

Job Responsibility

Perform complex repairs on aircraft systems
Assist in creation of service orders with SAP or applicable operating systems
May assist in complete engine and / or APU runs, as required
Provide time estimates
Train, coach and support other employees
May perform Delegated Inspector (DI) function as qualified by QA

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

New

Support Team Supervisor

This role is responsible for the safe and efficient planning, coordination, and ...

Location

United Kingdom , Hope

Salary:

Not provided

Breedon Group plc

Expiration Date

Until further notice

Requirements

Minimum of 4 Years/proven cement industry experience
A mechanical Engineering background, with practical experience working on or alongside heavy industrial plant and equipment
Hands-on experience producing and working to risk assessments, method statements, and permit-to-work systems, including LOTOTO and isolations
Experience identifying and escalating mechanical defects before failure
Advanced First aid and Rescue Knowledge (Advantageous)
Preheater and process Knowledge.
Strong safety, risk, and compliance knowledge
Mechanical competence in heavy plant environments
Effective fault identification and escalation
Strong planning skills

Job Responsibility

Plan and supervise weekly air blaster maintenance, ensuring inspections, defect identification, and corrective actions are completed to standard.
Lead and support the Emergency Response Team, ensuring readiness, competence, and compliance with emergency and environmental procedures.
Plan and deliver emergency response drills and training to maintain team preparedness.
Ensure all site spill kits are maintained, inspected, and fit for purpose.
Act as Defibrillator Champion, ensuring equipment is maintained, accessible, and supported by workforce awareness and training.
Oversee firing pipe refurbishment, including planning, contractor coordination, inspections, refractory installation, and safe return to service.
Lead and develop the Support Team, ensuring safe and effective preheater cleaning and process support activities using Cardox, HP jetting, and LP water systems.
Provide out of hours support for process issues and blockages to maintain production continuity.
Provide cover for the Yard Supervisor, ensuring safe yard operations, waste management, and drainage upkeep.

What we offer

Company Pension
Bonus scheme
Discount Scheme
Enhanced Maternity, Paternity & Adoptions Scheme
Free on-site Parking
Gym Access
Health & Wellbeing Initiatives
Life Assurance
Share Save Scheme
Volunteering Policy

Fulltime

Jet Engine Mechanic

Randstad

Location:
Belgium , Steenokkerzeel

Category:
IT - Administration

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 06, 2026

Expiration:
March 10, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Jet Engine Mechanic

Airframe & Powerplant (A&P) Technician

Airframe & Powerplant (A&P) Technician

Manager, Process Module Engineering (Packaging Engineering)

Aircraft Mechanic UH 60L

Aircraft Mechanic w/ Respirator Certification

R&D Intern

Lead Technician, Airframe & Powerplant (A&P)

Support Team Supervisor

Jet Engine Mechanic

Randstad

Location:Belgium , Steenokkerzeel

Category:IT - Administration

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 06, 2026

Expiration:March 10, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Jet Engine Mechanic

Airframe & Powerplant (A&P) Technician

Airframe & Powerplant (A&P) Technician

Manager, Process Module Engineering (Packaging Engineering)

Aircraft Mechanic UH 60L

Aircraft Mechanic w/ Respirator Certification

R&D Intern

Lead Technician, Airframe & Powerplant (A&P)

Support Team Supervisor

Location:
Belgium , Steenokkerzeel

Category:
IT - Administration

Contract Type:
Not provided

Job Posted:
January 06, 2026

Expiration:
March 10, 2026