Engineering Drafter, Change Coordinator Job at Intellisense Systems (Torrance)

Engineering Drafter, Change Coordinator

This position is a dual-track role requiring a high-cadence technical expert (70...

Location

United States , Torrance

Salary:

39.00 - 50.00 USD / Hour

Intellisense Systems

Expiration Date

Until further notice

Requirements

Technical AS Degree in Drafting/Design or equivalent certification
5+ years of hands-on experience in a high-volume manufacturing environment, specifically in a 'Lead' or 'Senior' capacity
Capable of producing high quality manufacturing drawings that apply ASME standards e.g., Y14.5 using GD&T
Expert-level proficiency in SolidWorks and PDM Administration
Ability to utilize multiple word-processing and database applications including MS Office applications Word, Excel, Access, as well as Adobe Acrobat, etc. (intermediate/advance skills a plus)
Creativity, strong problem-solving and organizational skills, excellent technical writing, and verbal communication skills are essential
Proven 'Closer' Mindset: Demonstrated ability to finalize drawing packages and drive them through the approval cycle to successful production release with zero-error output
High Detail Orientation: Advanced understanding of dimensioning, tolerancing (GD&T), and documentation for a variety of commodities including machined, sheet metal, and wire harness assemblies
Must be capable of executing daily decisions and managing project timelines with very little supervision
U.S. Citizenship is required

Job Responsibility

Master-level preparation, or modification of complex CAD models and production design drawings (MIL STD level 2 & 3), BOMs and documents with MCAD (SolidWorks preferred) and MSOffice tools as needed per CM and drafting standards including ASME Y14-100, Y14.5 (GD&T), Y14.24 ensuring 100% accuracy
Collaborate on 2D and 3D models, sketches, layouts, and assemblies with the engineering team
Take full ownership of the 'Closing' phase: create process, status, and audit Change Orders (COs) to ensure they are consistent, compliant, and ready for production release
Drawings/ layouts that show the details for a wide variety of commodities including machined parts, sheet metal, injection molded parts, laser cut parts, rapid prototype or 3D printed parts, wire harnesses and cable assemblies, mechanical tools and assemblies
Create, input and extract part and bill of material (BOM) data from Engineering Drawings/SolidWorks PLM into and from various CM databases including CM/PLM (QCBD), and ERP (Costpoint)
Assist Configuration Management in organizing and maintaining product design and technical files for products in production needing sustainment (all types
SolidWorks drawings, 3D models, Source control drawings, vendor item control drawings, tabulated drawings, etc.)
Create, process, status, and update engineering change requests (ECR’s), change orders (CO’s), and Configuration Items per CM procedures in support of engineering programs and quality management system (ISO9001: AS9100)
Review and validate, with help from configuration manager and engineering, change orders for consistency including change description, classification, and efficiency
Review change items (drawing and documents) submitted on Change Orders for consistency with CM and corporate/Industry standard drafting styles

What we offer

4 Weeks PTO a year (including 40 hours of PTO your first day)
10 paid holidays
401(k) with 100% employer matching up to 4% of salary (no vesting period)
Multiple options for Medical, Vision, Dental Insurance plans
Health Savings Accounts
Flexible Spending Accounts
Tuition Assistance (30% of Tuition with a minimum qualifying grade)
100% Paid Employee Assistance Program (EAP)
100% Paid Basic Life and AD&D Insurance
100% Paid Workers Compensation Insurance

Fulltime

Engineering Drafter, Change Coordinator

This position is a dual-track role requiring a high-cadence technical expert (70...

Location

United States , Torrance

Salary:

39.00 - 50.00 USD / Hour

Intellisense Systems

Expiration Date

Until further notice

Requirements

Technical AS Degree in Drafting/Design or equivalent certification
5+ years of hands-on experience in a high-volume manufacturing environment, specifically in a "Lead" or "Senior" capacity
Capable of producing high quality manufacturing drawings that apply ASME standards e.g., Y14.5 using GD&T
Expert-level proficiency in SolidWorks and PDM Administration
Ability to utilize multiple word-processing and database applications including MS Office applications Word, Excel, Access, as well as Adobe Acrobat, etc.
Creativity, strong problem-solving and organizational skills, excellent technical writing, and verbal communication skills are essential
Proven "Closer" Mindset: Demonstrated ability to finalize drawing packages and drive them through the approval cycle to successful production release with zero-error output
High Detail Orientation: Advanced understanding of dimensioning, tolerancing (GD&T), and documentation for a variety of commodities
Must be capable of executing daily decisions and managing project timelines with very little supervision
U.S. Citizenship is required

Job Responsibility

Master-level preparation, or modification of complex CAD models and production design drawings (MIL STD level 2 & 3), BOMs and documents with MCAD (SolidWorks preferred) and MSOffice tools as needed per CM and drafting standards
Collaborate on 2D and 3D models, sketches, layouts, and assemblies with the engineering team
Take full ownership of the "Closing" phase: create process, status, and audit Change Orders (COs) to ensure they are consistent, compliant, and ready for production release
Drawings/ layouts that show the details for a wide variety of commodities
Create, input and extract part and bill of material (BOM) data from Engineering Drawings/SolidWorks PLM into and from various CM databases
Assist Configuration Management in organizing and maintaining product design and technical files for products in production needing sustainment
Create, process, status, and update engineering change requests (ECR’s), change orders (CO’s), and Configuration Items per CM procedures
Review and validate, with help from configuration manager and engineering, change orders for consistency
Review change items (drawing and documents) submitted on Change Orders for consistency with CM and corporate/Industry standard drafting styles
Review for consistency, with help from Configuration Manager, the Change Impact Analysis on COs and ECRs with engineering, planning and production staff

What we offer

4 Weeks PTO a year (including 40 hours of PTO your first day)
10 paid holidays
401(k) with 100% employer matching up to 4% of salary (no vesting period)
Multiple options for Medical, Vision, Dental Insurance plans
Health Savings Accounts
Flexible Spending Accounts
Tuition Assistance (30% of Tuition with a minimum qualifying grade)
100% Paid Employee Assistance Program (EAP)
100% Paid Basic Life and AD&D Insurance
100% Paid Workers Compensation Insurance

Fulltime

Substation Lead

Contribute your expertise, skills, and experience as a Substation Lead by joinin...

Location

United States , Chicago

Salary:

Not provided

KDM Engineering

Expiration Date

Until further notice

Requirements

Bachelor of Science in Civil, Electrical, or Mechanical Engineering or related degree from an ABET accredited program
Minimum 5 years of experience in T&D engineering/design, including at least 1 year leading or managing engineering/design teams
Must have ability to deal effectively with a wide variety of project-related matters
Excellent oral and written communication skills and interpersonal skills
Must demonstrate creativity, foresight, and mature judgment in anticipating and solving problems
The ability to thoughtfully and positively influence, lead, and manage change
Proficient in the use of basic computer software required for project management (i.e., Microsoft Word, Excel, PowerPoint, Project)
Must be willing to comply with all pre-employment screening
Must be legally authorized to work in the U.S.
Possess a valid Driver’s License

Job Responsibility

Supervision and coordination of engineering teams
Train and develop junior engineers, designers and drafters
Perform substation protection and control design
Perform substation physical design
Performing or overseeing quality review of above facets of substation design
Preparing equipment specifications
Providing support for our clients during construction
Perform field inspections and compliance documentation
Responsible for overall project, project planning, scheduling, resource management, budgeting, as well as establishing and meeting critical project objectives
Coordination with Transmission and Distribution clients, subcontractors, and other external stakeholders

What we offer

Competitive Base Salary
Comprehensive Benefits Package
Company Paid Holidays
Great Work-Life Balance
Fun and Flexible Work Environment
Organization with People-First Mentality
Dynamic Leadership Team
Positive team environment
Competitive salaries
Flexible schedules

Fulltime

Mechanical Designer or Engineer

Are you a Mechanical Designer or Engineer looking for a new challenge? Look no f...

Location

United States , Green Bay, Allouez

Salary:

Not provided

Somerville Architects and Engineers

Expiration Date

Until further notice

Requirements

Four or more years of mechanical design experience for buildings in the healthcare, education, community, or commercial markets
A strong portfolio of work
Experience with Revit, BIM software, and Bluebeam preferred
Experience with Carrier Hourly Analysis preferred but not required
Associate degree or Bachelor’s degree in Mechanical Engineering
Designer of Engineering Systems (DES) credential or Professional Engineer (PE) license
LEED accreditation preferred
Excellent communication skills
Strong attention to detail with critical thinking and problem-solving abilities
Creative approach to developing solutions for building system challenges

Job Responsibility

Collaborating with other engineers while mentoring designers and drafters
Performing building system assessments, documenting existing conditions, and writing reports that provide recommendations for refurbishment or replacement
Writing scope of work documents for mechanical designs
Clearly and effectively presenting complex mechanical engineering concerns and solutions to the owner and design team
Conducting calculations for heating and cooling load, ventilation quantities, and mechanical equipment selection
Utilizing BIM software and visualization methods to design heating, cooling, and ventilation systems and providing layouts
Incorporating best practices and sustainability strategies into designs
Ensuring projects meet client expectations and code requirements
Providing estimates of probable construction costs for mechanical designs
Coordinating with consultants and contractors

What we offer

Generous salary
Health, vision, dental, and life insurance
Employee Stock Ownership Plan (ESOP)
401K & Profit Sharing
Industry-leading annual discretionary bonuses
Paid time off & eight paid holidays

Fulltime

Plumbing Designer or Engineer

Are you a Plumbing Designer or Engineer looking for a new challenge? Look no fur...

Location

United States , Green Bay, Allouez

Salary:

Not provided

Somerville Architects and Engineers

Expiration Date

Until further notice

Requirements

Four or more years of plumbing design experience for buildings in the healthcare, education, community, or commercial markets
A strong portfolio of work
Experience with Revit, BIM software, and Bluebeam preferred
Understanding of Wisconsin Administrative Plumbing code
Associate degree or Bachelor’s degree in Mechanical Engineering
Certified Plumbing Designer (CPD), Designer of Engineering Systems (DES) credential, or Professional Engineer (PE) license
LEED accreditation preferred
Excellent communication skills
Strong attention to detail with critical thinking and problem-solving abilities
Creative approach to developing solutions for building system challenges

Job Responsibility

Collaborating with other engineers while mentoring designers and drafters
Performing building system assessments, documenting existing conditions, and writing reports that provide recommendations for refurbishment or replacement
Writing scope of work documents for plumbing designs
Clearly and effectively presenting complex plumbing engineering concerns and solutions to the owner and design team
Conducting calculations for appropriate plumbing and/or fire protection systems and plumbing equipment selection
Utilizing BIM software and visualization methods to design plumbing systems and provide layouts
Incorporating best practices and sustainability strategies into designs
Ensuring projects meet client expectations and code requirements
Providing estimates of probable construction costs for plumbing designs
Coordinating with consultants and contractors

What we offer

Generous salary
Health, vision, dental, and life insurance
Employee Stock Ownership Plan (ESOP)
401K & Profit Sharing
Industry-leading annual discretionary bonuses
Paid time off & eight paid holidays

Fulltime

New

Lawson Senior AP Processor

THE ACCOUNTS PAYABLE PROCESSOR WILL SUPPORT DAILY AP OPERATIONS ACROSS BOTH PO A...

Location

United States , Houston

Salary:

60.00 USD / Hour

Medasource

Expiration Date

Until further notice

Requirements

LAWSON (INFOR) EXPERIENCE REQUIRED
EXCEL PROFICIENCY REQUIRED
DEMONSTRATED ABILITY TO MANAGE HIGH-VOLUME INVOICE PROCESSING
HEALTHCARE AP EXPERIENCE REQUIRED FOR PO-SIDE ROLES
HEALTHCARE EXPERIENCE NOT REQUIRED FOR NON-PO ROLE
STRONG CUSTOMER SERVICE AND VENDOR COMMUNICATION SKILLS
BACHELOR’S DEGREE PREFERRED OR EQUIVALENT WORK EXPERIENCE

Job Responsibility

PROCESS AND VALIDATE PO-BASED INVOICES WITHIN LAWSON
OWN THE 3-WAY MATCH (PO, RECEIVING, INVOICE)
RESEARCH AND RESOLVE PRICE DISCREPANCIES, MISSING RECEIPTS, AND VENDOR ISSUES
PARTNER CLOSELY WITH SUPPLY CHAIN / MATERIALS MANAGEMENT TO RECONCILE EXCEPTIONS
MANAGE VENDOR INQUIRY MAILBOXES AND COMMUNICATION
HANDLE VENDOR DISCUSSIONS ON REBATES, DISCOUNTS, AND PAYMENT TERMS (NET 1–15)
UTILIZE GHX PORTAL FOR EDI ELECTRONIC INVOICE PROCESSING
PROVIDE MENTORSHIP TO JUNIOR PROCESSORS AND SUPPORT CONTINUOUS IMPROVEMENT
MANAGE EXPENSE REPORTS, ELECTRONIC PAYMENTS, AND NON-PO INVOICE PROCESSING
PROCESS REIMBURSEMENTS THROUGH INFOR XM

What we offer

competitive medical, dental, vision, Health Savings Account, Dependent Care FSA, and supplemental coverage
401k plan that includes a company match and is fully vested after you become eligible
paid time off, sick time, and paid company holidays
Employee Assistance Program (EAP) that provides services like virtual counseling, financial services, legal services, life coaching

New

Accounting Clerk

We are looking for a detail-oriented Accounting Clerk to join our team in Bakers...

Location

United States , Bakersfield

Salary:

Not provided

Robert Half

Expiration Date

Until further notice

Requirements

Minimum of 3 years of experience in accounting or a related role
Proficiency in accounts receivable (AR) and accounts payable (AP) processes
Strong knowledge of QuickBooks and other accounting software
Exceptional attention to detail and accuracy in data entry
Ability to process invoices efficiently and with precision
Solid understanding of journal entries and bank reconciliations
Effective organizational and time management skills
Associate degree in accounting, business, or a related field preferred

Job Responsibility

Process accounts receivable transactions, including invoicing and payment tracking
Handle occasional accounts payable duties, ensuring accurate and timely payments
Maintain and update accounting databases to ensure data integrity
Record journal entries and assist with general ledger maintenance
Reconcile cash receipts and bank accounts to ensure financial accuracy
Review and process invoices, verifying details for completeness and accuracy
Perform data entry tasks to support accounting operations
Collaborate with team members to ensure seamless financial workflows
Utilize QuickBooks for managing and tracking financial activities

What we offer

medical
vision
dental
life and disability insurance
401(k) plan

New

Cook

Hartwell Lodge Care Home in Fareham is looking for an experienced Cook or Chef t...

Location

United Kingdom , Fareham

Salary:

12.72 GBP / Hour

Buckland Care

Expiration Date

Until further notice

Requirements

Several years of experience in hospitality/catering is required
Level 2 Food & Hygiene is required
A City & Guilds Catering qualification would be ideal but is not a requirement
Passionate about food, local produce and fresh ingredients
Good level of English
A good team player
Excellent time management skills
Prioritising resident and relative needs and offering personalised menus when required
Honest and kind person who can work under pressure
Previous experience in a care home is beneficial

Job Responsibility

Work to create inspiring mealtimes for residents at the home, catering to all preferences and dietary requirements
Enjoy interacting and communicating with the elderly as there will be regular contact with our residents
Have up to date knowledge of food health and hygiene
Knowledge on fortified diets and soft diets, but we can train you on this if need be

Engineering Drafter, Change Coordinator

Intellisense Systems

Location:
United States , Torrance

Category:
IT - Administration

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 15, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Engineering Drafter, Change Coordinator

Engineering Drafter, Change Coordinator

Engineering Drafter, Change Coordinator

Substation Lead

Mechanical Designer or Engineer

Plumbing Designer or Engineer

Lawson Senior AP Processor

Accounting Clerk

Cook

Engineering Drafter, Change Coordinator

Intellisense Systems

Location:United States , Torrance

Category:IT - Administration

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 15, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Engineering Drafter, Change Coordinator

Engineering Drafter, Change Coordinator

Engineering Drafter, Change Coordinator

Substation Lead

Mechanical Designer or Engineer

Plumbing Designer or Engineer

Lawson Senior AP Processor

Accounting Clerk

Cook

Location:
United States , Torrance

Category:
IT - Administration

Contract Type:
Not provided

Job Posted:
January 15, 2026