Engineering Drafter, Change Coordinator Job at Intellisense Systems (Torrance)

Engineering Drafter, Change Coordinator

This position is a dual-track role requiring a high-cadence technical expert (70...

Location

United States , Torrance

Salary:

39.00 - 50.00 USD / Hour

Intellisense Systems

Expiration Date

Until further notice

Requirements

Technical AS Degree in Drafting/Design or equivalent certification
5+ years of hands-on experience in a high-volume manufacturing environment, specifically in a 'Lead' or 'Senior' capacity
Capable of producing high quality manufacturing drawings that apply ASME standards e.g., Y14.5 using GD&T
Expert-level proficiency in SolidWorks and PDM Administration
Ability to utilize multiple word-processing and database applications including MS Office applications Word, Excel, Access, as well as Adobe Acrobat, etc. (intermediate/advance skills a plus)
Creativity, strong problem-solving and organizational skills, excellent technical writing, and verbal communication skills are essential
Proven 'Closer' Mindset: Demonstrated ability to finalize drawing packages and drive them through the approval cycle to successful production release with zero-error output
High Detail Orientation: Advanced understanding of dimensioning, tolerancing (GD&T), and documentation for a variety of commodities including machined, sheet metal, and wire harness assemblies
Must be capable of executing daily decisions and managing project timelines with very little supervision
U.S. Citizenship is required

Job Responsibility

Master-level preparation, or modification of complex CAD models and production design drawings (MIL STD level 2 & 3), BOMs and documents with MCAD (SolidWorks preferred) and MSOffice tools as needed per CM and drafting standards including ASME Y14-100, Y14.5 (GD&T), Y14.24 ensuring 100% accuracy
Collaborate on 2D and 3D models, sketches, layouts, and assemblies with the engineering team
Take full ownership of the 'Closing' phase: create process, status, and audit Change Orders (COs) to ensure they are consistent, compliant, and ready for production release
Drawings/ layouts that show the details for a wide variety of commodities including machined parts, sheet metal, injection molded parts, laser cut parts, rapid prototype or 3D printed parts, wire harnesses and cable assemblies, mechanical tools and assemblies
Create, input and extract part and bill of material (BOM) data from Engineering Drawings/SolidWorks PLM into and from various CM databases including CM/PLM (QCBD), and ERP (Costpoint)
Assist Configuration Management in organizing and maintaining product design and technical files for products in production needing sustainment (all types
SolidWorks drawings, 3D models, Source control drawings, vendor item control drawings, tabulated drawings, etc.)
Create, process, status, and update engineering change requests (ECR’s), change orders (CO’s), and Configuration Items per CM procedures in support of engineering programs and quality management system (ISO9001: AS9100)
Review and validate, with help from configuration manager and engineering, change orders for consistency including change description, classification, and efficiency
Review change items (drawing and documents) submitted on Change Orders for consistency with CM and corporate/Industry standard drafting styles

What we offer

4 Weeks PTO a year (including 40 hours of PTO your first day)
10 paid holidays
401(k) with 100% employer matching up to 4% of salary (no vesting period)
Multiple options for Medical, Vision, Dental Insurance plans
Health Savings Accounts
Flexible Spending Accounts
Tuition Assistance (30% of Tuition with a minimum qualifying grade)
100% Paid Employee Assistance Program (EAP)
100% Paid Basic Life and AD&D Insurance
100% Paid Workers Compensation Insurance

Fulltime

Engineering Drafter, Change Coordinator

This position is a dual-track role requiring a high-cadence technical expert (70...

Location

United States , Torrance

Salary:

39.00 - 50.00 USD / Hour

Intellisense Systems

Expiration Date

Until further notice

Requirements

Technical AS Degree in Drafting/Design or equivalent certification
5+ years of hands-on experience in a high-volume manufacturing environment, specifically in a 'Lead' or 'Senior' capacity
Capable of producing high quality manufacturing drawings that apply ASME standards e.g., Y14.5 using GD&T
Expert-level proficiency in SolidWorks and PDM Administration
Ability to utilize multiple word-processing and database applications including MS Office applications Word, Excel, Access, as well as Adobe Acrobat, etc.
Creativity, strong problem-solving and organizational skills, excellent technical writing, and verbal communication skills are essential
Proven 'Closer' Mindset: Demonstrated ability to finalize drawing packages and drive them through the approval cycle to successful production release with zero-error output
High Detail Orientation: Advanced understanding of dimensioning, tolerancing (GD&T), and documentation for a variety of commodities including machined, sheet metal, and wire harness assemblies
Must be capable of executing daily decisions and managing project timelines with very little supervision
U.S. Citizenship is required

Job Responsibility

Master-level preparation, or modification of complex CAD models and production design drawings (MIL STD level 2 & 3), BOMs and documents with MCAD (SolidWorks preferred) and MSOffice tools as needed per CM and drafting standards including ASME Y14-100, Y14.5 (GD&T), Y14.24 ensuring 100% accuracy
Collaborate on 2D and 3D models, sketches, layouts, and assemblies with the engineering team
Take full ownership of the 'Closing' phase: create process, status, and audit Change Orders (COs) to ensure they are consistent, compliant, and ready for production release
Drawings/ layouts that show the details for a wide variety of commodities including machined parts, sheet metal, injection molded parts, laser cut parts, rapid prototype or 3D printed parts, wire harnesses and cable assemblies, mechanical tools and assemblies
Create, input and extract part and bill of material (BOM) data from Engineering Drawings/SolidWorks PLM into and from various CM databases including CM/PLM (QCBD), and ERP (Costpoint)
Assist Configuration Management in organizing and maintaining product design and technical files for products in production needing sustainment (all types
SolidWorks drawings, 3D models, Source control drawings, vendor item control drawings, tabulated drawings, etc.)
Create, process, status, and update engineering change requests (ECR’s), change orders (CO’s), and Configuration Items per CM procedures in support of engineering programs and quality management system (ISO9001: AS9100)
Review and validate, with help from configuration manager and engineering, change orders for consistency including change description, classification, and efficiency
Review change items (drawing and documents) submitted on Change Orders for consistency with CM and corporate/Industry standard drafting styles

What we offer

4 Weeks PTO a year (including 40 hours of PTO your first day)
10 paid holidays
401(k) with 100% employer matching up to 4% of salary (no vesting period)
Multiple options for Medical, Vision, Dental Insurance plans
Health Savings Accounts
Flexible Spending Accounts
Tuition Assistance (30% of Tuition with a minimum qualifying grade)
100% Paid Employee Assistance Program (EAP)
100% Paid Basic Life and AD&D Insurance
100% Paid Workers Compensation Insurance

Fulltime

Substation Lead

Contribute your expertise, skills, and experience as a Substation Lead by joinin...

Location

United States , Chicago

Salary:

Not provided

KDM Engineering

Expiration Date

Until further notice

Requirements

Bachelor of Science in Civil, Electrical, or Mechanical Engineering or related degree from an ABET accredited program
Minimum 5 years of experience in T&D engineering/design, including at least 1 year leading or managing engineering/design teams
Must have ability to deal effectively with a wide variety of project-related matters
Excellent oral and written communication skills and interpersonal skills
Must demonstrate creativity, foresight, and mature judgment in anticipating and solving problems
The ability to thoughtfully and positively influence, lead, and manage change
Proficient in the use of basic computer software required for project management (i.e., Microsoft Word, Excel, PowerPoint, Project)
Must be willing to comply with all pre-employment screening
Must be legally authorized to work in the U.S.
Possess a valid Driver’s License

Job Responsibility

Supervision and coordination of engineering teams
Train and develop junior engineers, designers and drafters
Perform substation protection and control design
Perform substation physical design
Performing or overseeing quality review of above facets of substation design
Preparing equipment specifications
Providing support for our clients during construction
Perform field inspections and compliance documentation
Responsible for overall project, project planning, scheduling, resource management, budgeting, as well as establishing and meeting critical project objectives
Coordination with Transmission and Distribution clients, subcontractors, and other external stakeholders

What we offer

Competitive Base Salary
Comprehensive Benefits Package
Company Paid Holidays
Great Work-Life Balance
Fun and Flexible Work Environment
Organization with People-First Mentality
Dynamic Leadership Team
Positive team environment
Competitive salaries
Flexible schedules

Fulltime

Mechanical Designer or Engineer

Are you a Mechanical Designer or Engineer looking for a new challenge? Look no f...

Location

United States , Green Bay, Allouez

Salary:

Not provided

Somerville Architects and Engineers

Expiration Date

Until further notice

Requirements

Four or more years of mechanical design experience for buildings in the healthcare, education, community, or commercial markets
A strong portfolio of work
Experience with Revit, BIM software, and Bluebeam preferred
Experience with Carrier Hourly Analysis preferred but not required
Associate degree or Bachelor’s degree in Mechanical Engineering
Designer of Engineering Systems (DES) credential or Professional Engineer (PE) license
LEED accreditation preferred
Excellent communication skills
Strong attention to detail with critical thinking and problem-solving abilities
Creative approach to developing solutions for building system challenges

Job Responsibility

Collaborating with other engineers while mentoring designers and drafters
Performing building system assessments, documenting existing conditions, and writing reports that provide recommendations for refurbishment or replacement
Writing scope of work documents for mechanical designs
Clearly and effectively presenting complex mechanical engineering concerns and solutions to the owner and design team
Conducting calculations for heating and cooling load, ventilation quantities, and mechanical equipment selection
Utilizing BIM software and visualization methods to design heating, cooling, and ventilation systems and providing layouts
Incorporating best practices and sustainability strategies into designs
Ensuring projects meet client expectations and code requirements
Providing estimates of probable construction costs for mechanical designs
Coordinating with consultants and contractors

What we offer

Generous salary
Health, vision, dental, and life insurance
Employee Stock Ownership Plan (ESOP)
401K & Profit Sharing
Industry-leading annual discretionary bonuses
Paid time off & eight paid holidays

Fulltime

Plumbing Designer or Engineer

Are you a Plumbing Designer or Engineer looking for a new challenge? Look no fur...

Location

United States , Green Bay, Allouez

Salary:

Not provided

Somerville Architects and Engineers

Expiration Date

Until further notice

Requirements

Four or more years of plumbing design experience for buildings in the healthcare, education, community, or commercial markets
A strong portfolio of work
Experience with Revit, BIM software, and Bluebeam preferred
Understanding of Wisconsin Administrative Plumbing code
Associate degree or Bachelor’s degree in Mechanical Engineering
Certified Plumbing Designer (CPD), Designer of Engineering Systems (DES) credential, or Professional Engineer (PE) license
LEED accreditation preferred
Excellent communication skills
Strong attention to detail with critical thinking and problem-solving abilities
Creative approach to developing solutions for building system challenges

Job Responsibility

Collaborating with other engineers while mentoring designers and drafters
Performing building system assessments, documenting existing conditions, and writing reports that provide recommendations for refurbishment or replacement
Writing scope of work documents for plumbing designs
Clearly and effectively presenting complex plumbing engineering concerns and solutions to the owner and design team
Conducting calculations for appropriate plumbing and/or fire protection systems and plumbing equipment selection
Utilizing BIM software and visualization methods to design plumbing systems and provide layouts
Incorporating best practices and sustainability strategies into designs
Ensuring projects meet client expectations and code requirements
Providing estimates of probable construction costs for plumbing designs
Coordinating with consultants and contractors

What we offer

Generous salary
Health, vision, dental, and life insurance
Employee Stock Ownership Plan (ESOP)
401K & Profit Sharing
Industry-leading annual discretionary bonuses
Paid time off & eight paid holidays

Fulltime

New

Waiter/waitress

If you're passionate about fresh food, the highest service standards and thrive ...

Location

United Kingdom , Shrewsbury

Salary:

12.21 GBP / Hour

Brunning & Price

Expiration Date

Until further notice

Requirements

Previous experience in hospitality as a waitress/waiter, bar tender, barista or food and beverage assistant ideally in a pub, restaurant, hotel or bar would be helpful but isn't essential
Natural ability to look after people and make them happy
Passionate about food and drink
Hands on with a positive attitude
Bring life experience to help keep a busy shift calm and collected

Job Responsibility

Look after customers in the best way possible
Ensure a busy shift remains calm and collected

What we offer

Tronc (card tips paid into bank)
Paid overtime
Great cash tips
Free meals on shift
30% discount for you, your friends and family across B&P and our group including wagamama
NEST pension
Great discounts via Perks on Tap
£1,000 referral bonus for introducing new Managers or Chefs
Wagestream - use flexible pay to choose when to get paid
Weekly pay

Fulltime

New

Merchandiser Stocker II

The Merchandiser is responsible for providing high-quality merchandising support...

Location

United States , Reno; Sparks; Fernley; Fallon; Truckee; Gardnerville; Carson City; Dayton; Lake Tahoe

Salary:

22.40 - 23.61 USD / Hour

Keurig Dr Pepper

Expiration Date

Until further notice

Requirements

Ability to lift-up to 50 lbs repeatedly
Capability to push and pull up to 100 lbs repeatedly
Possession of a valid driver's license
Access to a dependable and reliable vehicle
Proof of Vehicle Insurance

Job Responsibility

Stocking and displaying products on shelves/coolers at large accounts within a set territory
Reporting directly to assigned stores for scheduled shifts
Covering routes as assigned
Using personal vehicle to travel among stores in territory
Clocking in and out for scheduled shifts and tracking mileage via company-issued app

What we offer

Medical, Dental and Vision
Paid Time Off
401(k) program with employer match
Child & Elder Care
Adoption Benefits
Paid Parental Leave
Fertility Benefits
Employee Resource Groups
Breastmilk Shipping Services
Dependent Scholarship Program

Fulltime

New

Registered Nurse Infusion

Provides and coordinates nursing care in collaboration with the health team for ...

Location

United States , Elgin

Salary:

35.50 - 53.25 USD / Hour

Advocate Health Care

Expiration Date

Until further notice

Requirements

Registered Nurse license issued by the state in which the team member practices
Basic Life Support (BLS) for Healthcare Providers certification issued by the American Heart Association (AHA) needs to be obtained within 6 months
ONS/ONCC Chemotherapy and Immunotherapy Provide Card/Certificate within 30 days of hire
Associate's Degree in Nursing required
Typically requires 2 years of experience in a clinical setting that includes experiences in specialty
Ability to work independently and make sound judgments
Exceptional organization and communication skills (oral and written)
Exceptional customer service skills
Ability to multi-task with frequent interruptions
Ability to work with diverse patient populations

Job Responsibility

Utilizing the nursing process, provides ongoing care according to the age specific and specialty specific care needs of the patient
Assesses educational needs and provides teaching and counseling to the patient and their family
Integrates health promotion and preventive aspects of care
Integrates symptom assessment and management according to the treatment plan
Assesses social determinants of health that could impact care and coordinates care to the appropriate resources
Assumes primary responsibility for caseloads consisting of patients in specialty area
Anticipates and recognizes changes in a patient's status and need for care
Determines priorities of patient care based on patient needs and in alignment with the treatment plan
Provides ongoing assessment of patient's response to services and applies interventions as appropriate
Updates and revises care plan as needed

What we offer

Paid Time Off programs
Health and welfare benefits such as medical, dental, vision, life, and Short- and Long-Term Disability
Flexible Spending Accounts for eligible health care and dependent care expenses
Family benefits such as adoption assistance and paid parental leave
Defined contribution retirement plans with employer match and other financial wellness programs
Educational Assistance Program

Fulltime

Engineering Drafter, Change Coordinator

Intellisense Systems

Location:
United States , Torrance

Category:
IT - Administration

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 26, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Engineering Drafter, Change Coordinator

Engineering Drafter, Change Coordinator

Engineering Drafter, Change Coordinator

Substation Lead

Mechanical Designer or Engineer

Plumbing Designer or Engineer

Waiter/waitress

Merchandiser Stocker II

Registered Nurse Infusion

Engineering Drafter, Change Coordinator

Intellisense Systems

Location:United States , Torrance

Category:IT - Administration

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 26, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Engineering Drafter, Change Coordinator

Engineering Drafter, Change Coordinator

Engineering Drafter, Change Coordinator

Substation Lead

Mechanical Designer or Engineer

Plumbing Designer or Engineer

Waiter/waitress

Merchandiser Stocker II

Registered Nurse Infusion

Location:
United States , Torrance

Category:
IT - Administration

Contract Type:
Not provided

Job Posted:
January 26, 2026