Electro Technical Officer Job at North Star Shipping

Electrical and Avionics Systems Engineer

ITPS is seeking a full-time Electrical Engineer to join our engineering team in ...

Location

Canada , London, Ontario

Salary:

Not provided

ITPS (CANADA) LTD

Expiration Date

Until further notice

Requirements

Solid understanding of aircraft electrical systems, power distribution, and signal integrity
Hands-on experience with avionics interfaces and protocols: ARINC 429, RS-232/422/485, CAN bus
Experience with LRU integration, signal routing, grounding/shielding practices, and EMI/EMC considerations
Ability to work with aircraft sensors (AHRS, IMUs, magnetometers, electro-optical payloads) and mission/display computers
Familiarity with technical drawing tools (e.g., MS Visio, Enovia) and engineering design platforms
Understanding of regulatory and airworthiness documentation standards in aerospace systems
Proficiency with tools such as: MS Office, Navision, Enovia, ARINC scheduling software
Experience with Matlab or IADS for system analysis and data visualization

Job Responsibility

Lead design and development of aircraft electrical systems from concept to production
Prepare and maintain engineering documentation: I/O definitions, schematics, interface control documents (ICDs), wiring diagrams
Design and review custom PCB layouts and avionics harnessing
Oversee component selection, BOM management, and procurement coordination
Plan and conduct bench-level and on-aircraft testing, including functional verification, continuity checks, and system validation
Collaborate with avionics, flight test, and systems teams for seamless integration into flight platforms
Provide technical support during installation, troubleshooting, and acceptance testing phases

Fulltime

Electrical Engineer, Journeyman

DCS has an exciting opportunity for an Electrical Engineer to support the Air Fo...

Location

United States , Ogden

Salary:

Not provided

DCS Corporation

Expiration Date

Until further notice

Requirements

U.S. Citizenship is required
Must hold an active Secret clearance
Bachelor’s Degree in a professional engineering discipline and at least 5 years of experience in the respective technical / professional discipline being performed, 3 of which must be in the DoD, OR 7+ years of directly related experience, 5 of which must be in the DoD
Experience and/or training in the following electrical engineering areas: Design, development, and circuit analysis
RF chain sub-specialties (antenna design, high power transmitters/amplifiers, receiver processing, etc.)
Electro-mechanical controls
Modeling and simulation
Test and evaluation
Technical data package development and sustainment
Principles of configuration management

Job Responsibility

Provide system engineering review and analysis of assigned systems throughout all acquisition phases
Assist in translating DoD user requirements into system requirements for design, development, fabrication, testing, and evaluation of systems, subsystems, and equipment
Develop and refine features to improve, extend, or validate current methods, data, or techniques
Review overall system design baseline (architecture and interoperability) requirements
Assist in the development of system specifications and architecture products
Perform independent analysis of engineering changes, specifications, and vendor proposals, providing recommendations to Government points of contact
Support life cycle cost evaluations of proposed systems and components
Provide test and evaluation support, including planning, execution, and analysis, and participate in Integrated Test Teams, Test Readiness Reviews, and related program events
Schedule and secure test resources to meet program office objectives
Monitor and report on test and evaluation (T&E) activities across all systems

Fulltime

Biomedical Equipment Technician II

The Biomedical Equipment Technician II (BMET2) provides clinical equipment servi...

Location

United States , Marietta

Salary:

Not provided

Wellstar Health System

Expiration Date

Until further notice

Requirements

High School Diploma General
Associates Electrical Engineering or Associates Biomedical Engineering or Associates Mechanical Engineering
GADL - Georgia Driver's License or VSDL - Valid State Driver's License
Minimum 3 years of experience in supporting medical devices and systems in a hospital environment
Minimum 3 years Knowledge of electronic digital circuitry and understanding of electronic and electro-mechanical devices
Proficient in Microsoft Office software including Word, Excel, and PowerPoint
Capable of interpreting building architectural and systems drawings and information
Able to compose and deliver presentations regarding medical devices and systems to clinical staff
Working knowledge of Security Protocols

Job Responsibility

Perform calibrations and repairs on equipment as assigned
Demonstrate knowledge of safe and approved troubleshooting techniques on medical devices
Read schematics and service manuals, consult with vendors and service representatives to assist in troubleshooting
Utilize test equipment and complete repairs in a time and cost-effective manner with patient safety as the primary focus
Document work performed and any significant performance data accurately and in a timely manner
Operates as part of a team of engineers responsible for providing in depth technical knowledge required to implement, manage, upgrade and support many applications and interoperability into EPIC and other repositories
Responds to service calls to evaluate, diagnose, and perform corrective and preventative maintenance on biomedical equipment which requires moderate intervention
Performs safety acceptance testing on new medical equipment and on hospital equipment returned after service
Documents all repair, maintenance, installation, and other activity in a timely fashion using the departments equipment management software and other mechanisms as needed
Update/Install medical equipment to include security protocols and work with customers to provide design solutions maintaining technical and application standards

Fulltime

Electrical Engineer, Journeyman

DCS has an exciting opportunity for an Electrical Engineer to support the Air Fo...

Location

United States , Ogden

Salary:

Not provided

DCS Corporation

Expiration Date

Until further notice

Requirements

U.S. Citizenship is required
Must hold an active Secret clearance
Bachelor’s Degree in a professional engineering discipline and at least 5 years of experience in the respective technical / professional discipline being performed, 3 of which must be in the DoD, OR 7+ years of directly related experience, 5 of which must be in the DoD
Experience and/or training in the following electrical engineering areas: Design, development, and circuit analysis
RF chain sub-specialties (antenna design, high power transmitters/amplifiers, receiver processing, etc.)
Electro-mechanical controls
Modeling and simulation
Test and evaluation
Technical data package development and sustainment
Principles of configuration management

Job Responsibility

Provide system engineering review and analysis of assigned systems throughout all acquisition phases
Assist in translating DoD user requirements into system requirements for design, development, fabrication, testing, and evaluation of systems, subsystems, and equipment
Develop and refine features to improve, extend, or validate current methods, data, or techniques
Review overall system design baseline (architecture and interoperability) requirements
Assist in the development of system specifications and architecture products
Perform independent analysis of engineering changes, specifications, and vendor proposals, providing recommendations to Government points of contact
Support life cycle cost evaluations of proposed systems and components
Provide test and evaluation support, including planning, execution, and analysis, and participate in Integrated Test Teams, Test Readiness Reviews, and related program events
Schedule and secure test resources to meet program office objectives
Monitor and report on test and evaluation (T&E) activities across all systems

Fulltime

Technical Services Engineer (CAMO)

To perform the technical services function for AHM CAMO contracted aircraft, new...

Location

Malaysia , Subang

Salary:

Not provided

Airbus

Expiration Date

February 28, 2026

Requirements

Minimum level: Diploma in Aircraft Engineering/ Electro-Mechanical/ Aeronautical or equivalent
Preferable having Bachelor degree in Aircraft Engineering/ Electro-Mechanical/ Aeronautical or equivalent
Proficiency in using technology systems & tools
proficient in Microsoft Office and CAMO Monitoring Software MIS
Excellent in written and verbal communication skills: reporting, presentations, etc.
Understanding of aircraft planning/maintenance systems and techniques and their relation to the aircraft maintenance program
Conversant with rules and regulations of Civil Aviation Authorities, pertaining to the CAMO, AMO, DOA, policies, procedures, manuals
Able to demonstrate a working knowledge of CAAM part 145, part 21 and sub part “M” requirements
3 Years experience of maintenance organization task/activity in an approved maintenance organisation organization, or experience of continuing airworthiness management task/activity
5 Years Experience in CAMO environment

Job Responsibility

To perform the technical services function for AHM CAMO contracted aircraft, new aircraft delivery and Part 145 project aircraft
To perform Technical Services function under the scope of AHM approved CAMO policy and procedures
Ensure the departmental process and procedures complied with Malaysian Civil Aviation Regulation (MCAR), CAAM Civil Aviation Directives (CAD) and related CAAM Civil Aviation Guidance Materials (CAGM)
Verify the adequacy of the CAMO process to meet the regulatory and operational requirement
Verify the effectiveness and efficiency of CAME, CAMP and CAMO forms
Ensure effective and efficient liaison with CAAM on matters related to continuing airworthiness, interpretation of regulation, policy, procedures and maintenance certification matters
Responsible for undertaking the necessary corrective action and preventive actions due to audit and ensure the implementation
Liaison with manufacturer and operator for any continuing airworthiness technical and regulatory related matters
Support day-to-day basis of CAMO technical services function, including related issues on the continuing airworthiness matters i.e Airworthiness Directives, Service Bulletins, Mandatory Service Bulletins, Master Servicing Manuals, Airworthiness Limitation Sections , and any modification outside of Type Certificate Holder (TCH) approved documentation
Coordinate modifications and/or repairs with the AHM Design Office or any other Approved Design Organisation (DOA)

Fulltime

Electronics Avionics Technician Level 2

For us, working at Safran is more than just a job; it's a passion. There's the u...

Location

United States , Grand Prairie

Salary:

Not provided

Assessfirst

Expiration Date

Until further notice

Requirements

High school diploma or general education degree (GED) is required
Two (2) or more years of related work experience in electro-mechanical repair, maintenance, or production
or an equivalent combination of education and experience
Proficiency in using production and repair tools, workbenches, instrumentation, and precision measuring skills
Ability to understand and apply both Metric and ASME torque standards, properly use and calibrate torque wrenches, and measure with calipers, micrometers, depth gauges, and CMMs
Familiarity with soldering techniques on electronic and electromechanical components
Working knowledge of FAA regulations, understanding of quality, CMM requirements, and effective documentation practices
Ability to read and interpret technical manuals, drawings, and specifications
Strong attention to detail, accuracy, and organizational skills
Basic level of proficiency with Microsoft Office Suite (Outlook, Word, Excel)

Job Responsibility

Conduct standard testing procedures on various equipment and validate the results
Perform repairs on aviation units in compliance with FAA regulations and in accordance with the Component Maintenance Manual (CMM) requirements
Disassemble, clean, and visually inspect parts to identify issues or wear
Reassemble parts, ensuring all measurements meet specified tolerances and requirements
Accurately track and document all activities, maintaining proper control of parts
Help maintain shop compliance with regulatory and quality standards
Contribute to process improvements aimed at reducing cycle time
Ensure strict adherence to quality standards, with a strong emphasis on customer satisfaction
Apply maintenance manuals to evaluate and determine the acceptability of components
Regularly update work order information in the ERP system

Fulltime

Electro-Mechanical Avionics Technician Level 2

For us, working at Safran is more than just a job; it's a passion. There's the u...

Location

United States , Grand Prairie

Salary:

Not provided

Assessfirst

Expiration Date

Until further notice

Requirements

High school diploma or general education degree (GED)
Two (2) or more years of related work experience in electro-mechanical repair, maintenance, or production
Proficiency in using production and repair tools, workbenches, instrumentation, and precision measuring skills
Ability to understand and apply both Metric and ASME torque standards, properly use and calibrate torque wrenches, and measure with calipers, micrometers, depth gauges, and CMMs
Familiarity with soldering techniques on electronic and electromechanical components
Working knowledge of FAA regulations, understanding of quality, CMM requirements, and effective documentation practices
Ability to read and interpret technical manuals, drawings, and specifications
Strong attention to detail, accuracy, and organizational skills
Basic level of proficiency with Microsoft Office Suite (Outlook, Word, Excel)
Consistent compliance with safety rules and Personal Protective Equipment (PPE) requirements

Job Responsibility

Conduct standard testing procedures on various equipment and validate the results
Perform repairs on aviation units in compliance with FAA regulations and in accordance with the Component Maintenance Manual (CMM) requirements
Disassemble, clean, and visually inspect parts to identify issues or wear
Reassemble parts, ensuring all measurements meet specified tolerances and requirements
Accurately track and document all activities, maintaining proper control of parts
Help maintain shop compliance with regulatory and quality standards
Contribute to process improvements aimed at reducing cycle time
Ensure strict adherence to quality standards, with a strong emphasis on customer satisfaction
Apply maintenance manuals to evaluate and determine the acceptability of components
Regularly update work order information in the ERP system

Fulltime

New

Manufacturing Process Engineer III

The Manufacturing Process Engineer III develops and optimizes complex processes,...

Location

United States , Redmond, WA

Salary:

113000.00 - 145000.00 USD / Year

Sigma Design

Expiration Date

Until further notice

Requirements

Bachelor's degree in Engineering
Master's preferred
5+ years of related Process Engineering experience
Proven ability to integrate mechanical and electrical systems in small-batch or one-off builds
Strong command of DFM/DFA principles and practical experience influencing design decisions
Skilled in fixture/tooling development, process documentation, and build optimization
Proficient with CAD software and process simulation tools
Knowledge of quality systems, process validation, and root cause analysis methods
Experienced in Lean Manufacturing and Six Sigma principles, adapted for flexible, non-production workflows
Excellent interpersonal and communication skills, including direct client engagement and cross-functional collaboration

Job Responsibility

Design and implement advanced processes and assembly methods for prototype and low-volume electro-mechanical systems
Create process flows, work instructions, and fixture/tooling specifications that enable efficient prototype builds and testing
Provide expert Design for Manufacturing (DFM) and Design for Assembly (DFA) input during early product development
Lead process development and validation activities for new technologies and materials in an R&D setting
Architect assembly and test tooling, including defining requirements, reviewing designs, and overseeing implementation
Partner with cross-functional teams to iterate quickly on process concepts and troubleshoot technical issues in real time
Apply Lean and Six Sigma principles to reduce waste, improve build repeatability, and increase efficiency — tailored to a prototype environment
Serve as the technical lead for complex build programs, ensuring processes meet quality, cost, and schedule targets
Mentor junior engineers and technicians in process design, documentation, and build best practices
Interface directly with customers and internal project teams to communicate technical solutions and recommendations

What we offer

competitive compensation
a 401(k) with up to 4% company match
quarterly bonus program
15-days of accrued PTO
9 company paid holidays
multiple options for medical insurance
dental insurance
voluntary benefits: vision, long-term disability, and life insurance

Fulltime

Electro Technical Officer

North Star Shipping

Location:
United Kingdom

Category:
Logistics

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 03, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Electro Technical Officer

Electrical and Avionics Systems Engineer

Electrical Engineer, Journeyman

Biomedical Equipment Technician II

Electrical Engineer, Journeyman

Technical Services Engineer (CAMO)

Electronics Avionics Technician Level 2

Electro-Mechanical Avionics Technician Level 2

Manufacturing Process Engineer III

Electro Technical Officer

North Star Shipping

Location:United Kingdom

Category:Logistics

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 03, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Electro Technical Officer

Electrical and Avionics Systems Engineer

Electrical Engineer, Journeyman

Biomedical Equipment Technician II

Electrical Engineer, Journeyman

Technical Services Engineer (CAMO)

Electronics Avionics Technician Level 2

Electro-Mechanical Avionics Technician Level 2

Manufacturing Process Engineer III

Location:
United Kingdom

Category:
Logistics

Contract Type:
Not provided

Job Posted:
January 03, 2026