Electrical Works Engineer Job at YPERO S.A. (Skórzewo)

Electrical Engineer – Process Automation and Electrical Engineering

Electrical engineer is responsible for activities related to its discipline with...

Location

Italy , Milan

Salary:

Not provided

EUROTECNICA Contractors and Engineers S.p.A.

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in electrical engineering
Minimum +2/3 years of work experience in engineering design in Oil & Gas or Power sectors is preferred
Proactivity, sense of initiative, ability to work independently and in a team
Fluent in Italian and English (written and spoken)
Availability to short and long term national and international business trips

Job Responsibility

Develop the discipline deliverables such as: Single Line Diagrams
Load schedule/ Plant load balance
Network studies and calculations (Load flow, short circuit, stability, protection settings, harmonics, etc.)
Electrical equipment specifications for MV and LV equipment such as Motor Control Centers, switchgears, metering panels, transformers, UPSes, VFDs, motors, heaters, etc.
Earthing, lighting, tracing systems
CCTV, Public Address systems
Electrical cables routing, power distribution
Electrical layout drawings
Field installation details
Field equipment and accessories MTO

Fulltime

Electrical Engineer / Senior Electrical Engineer

Join Realta Fusion, as an Electrical Engineer / Senior Electrical Engineer, you’...

Location

United States , Madison

Salary:

Not provided

Realta Fusion Inc.

Expiration Date

Until further notice

Requirements

MS (+ 2 years’ experience), BS (+ 5 years’ experience), or equivalent experience in Electrical Engineering or a related field
Familiarity with EMI/EMC techniques and simulation tools (ANSYS Maxwell, Simplorer, HFSS), circuit simulation tools (SPICE, SIMetrix/SIMPLIS or equivalent), PCB design software tools (ALTIUM, ORCAD, or KICAD), and Load Flow software tools (ETAP, PSS-E, or TARA)
Exceptional interpersonal and communication skills (written, verbal, public presentation) to collaborate effectively with colleagues, external partners, and stakeholders

Job Responsibility

Support designing, assembling, testing, troubleshooting, and support of operations of high voltage and power transmission systems for driving pulsed electrical loads for WHAM, Anvil, and the Forge
Support assessment of power quality studies when necessary
Contribute to designing, procurement, construction, and commissioning of high-power electrical systems to drive pulsed loads (< 5 s) at voltages up to 500 kV
Support development of electrical system architecture and work with designers to produce electrical schematics and installation drawings
Collaborate with operators of power systems through machine commissioning and, for development machines, through the lifetime of the machine
Demonstrate rigorous engineering practices including management of cost, schedule, and resource estimates as they pertain to your design, build, and delivery timelines
Contribute to modelling, simulating, analyzing, and validating power electronics circuits, magnetic components and control strategies for power supplies applied to highly inductive loads
Contribute to design, prototyping, and fabrication of PCBs at various voltage thresholds for various applications
Work cross-functionally with scientists, engineers, and technicians to refine system requirements and ensure seamless integration
Synthesize and present technical work internally and externally, communicate daily with project teams and leadership to support programmatic needs

What we offer

Competitive compensation package, including equity stock options
Comprehensive benefits including health, dental, and vision insurance, plus a retirement savings plan
Flexible paid time off (PTO) to support work-life balance

Fulltime

Electrical Service Engineer

Are you are an experienced Electrical Service Engineer looking to join a stable ...

Location

United Kingdom , West Bromwich

Salary:

45000.00 - 48000.00 GBP / Year

Wallace Hind

Expiration Date

Until further notice

Requirements

A background in automation with the ability to test and fault-find on electrical drive systems
Experience working on industrial equipment such as pumps, rotating machinery, centrifuges, separators, and conveyors
Formal electrical qualifications, including 18th Edition certification
Hands-on experience working with electrical motors, PLCs, HMIs, and inverters
Mechanical and process knowledge to support service work
The ability to work independently, managing your workload and customer interactions effectively

Job Responsibility

Electrical fault-finding, troubleshooting, and repair of automation and drive systems
Setting up motor drives and inverters
Carrying out planned maintenance and responding to breakdowns
Installing and commissioning new equipment at customer sites (industrial, chemical, beverage etc)
Providing technical support and customer training where necessary
Ensuring compliance with relevant health and safety regulations

What we offer

Overtime
Company vehicle and tools provided
25 days holiday + Bank Holidays
Pension scheme
Flexible working based from home with site visits across the UK (Midlands and South)

Fulltime

Electrical Graduate Engineer or Electrical Designer

Perform as a critical design team member in electrical systems development and c...

Location

United States , Phoenix

Salary:

Not provided

LSW Engineers Arizona, Inc.

Expiration Date

Until further notice

Requirements

Excellent skills designing electrical systems
Experience in the architecture, engineering, and construction (AEC) industry
Working knowledge of current versions of Revit and AutoCAD
Ability to apply logic, reasoning, and organizational skills to structure concepts & ideas into deliverables
Working knowledge of COMcheck and applicable energy codes
Working knowledge with NEC and NFPA Code Standards
Working knowledge of Excel, OneNote, Word, etc.
Excellent oral and written communication skills
Ability to work well within a team structure
Ability to learn & grow professionally

Job Responsibility

Apply strong technical design skills and knowledge to produce accurate and timely project deliverables
Support project requirements with client interface, field investigation, basis of design narratives, development of electrical construction design documents that comply with all applicable codes and standards, review submittals, and support the project through construction completion
Design projects in Revit and AutoCAD for compliance with city, state, and national building codes, compliance with owner standards, and industry construction standards
Meet with and interact with clients and project stakeholders
Communicate with manufacturers and contractors to stay abreast of the latest trends and electrical systems technology
Coordinate and perform construction administration tasks internally & externally, enabling a successful project outcome

What we offer

Competitive wages
Employer funded profit sharing plan
401k plan with employer safe-harbor contributions
Excellent work environment
Opportunity to expand and improve professional skills

Electrical Engineer

We are on a mission to disrupt the global steel industry by producing green stee...

Location

Sweden , Stockholm

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Minimum 6-10 years working experience in major industrial capital projects in the areas of Electrical Design & Engineering, preferably in Steel Plant /Power Plant / Hydrogen / Oil & Gas Major Projects
Highly developed knowledge of industrial scale electrical designing
Experienced in ensuring that all electrical design & engineering documents and installations conform to relevant International & National Codes and Standards and also conform to Local Swedish and Scandinavian standards
To prepare, review, approve the design and site installation documents related to Electrical work, Power System Studies, (Load Flow, Short Circuit, Harmonic Analysis, Protection Relay Settings & Coordination, Equipment Sizing, Equipment Electrical Design Calculations, EHV-HV/ LV Sub-stations including Switchgears, Transformers, Cabling, Relays, UPS, Battery Chargers, HV/MV/LV Motors, Drives, Emergency Generators, Transmission and Distribution of Power, Hazardous area classification, field electrical equipment, Fire Alarm System, Instrumentation & Control System is preferred
Hands on experience on ETAP software, review of Design and Calculations done through ETAP or similar software
Previous project experience with International, Swedish /Scandinavian codes and standards will be an advantage
Experience in design, planning, execution, management & communication with all stakeholders in large successful capital projects
Extensive experience in coordinating with EPCM & OEM Electrical engineers and following, reviewing, commenting and approving design deliverables and documents
Must be knowledgeable about industry best practices and change management
Recent experience managing engineering and construction activities in large capital projects

Job Responsibility

Oversee, review and analyze the electrical design work for one or more areas (Steel Mill, Iron Reduction, Hydrogen Plant, Balance of Plant, PDOP Power Distribution areas and Ground Works) in Boden Project
Ensure coordination of our engineering partners to reach cost and time efficient design solutions for all electrical design & engineering work related to your area
Participate in the cross-functional delivery and technology teams
As part of the owners engineering team you are responsible for engineering assurance within your discipline
Ensure that EPCM and OEM partners get the information and feedback required to deliver the work in a safe, cost-effective, and schedule-effective way
Represent for the Electrical discipline, being the single point of contact for the delivery and quality of the discipline
Own Electrical engineering and design in the areas assigned
Provide leadership and guidance on developing the engineering and design strategy and concepts
Manage engineering work to ensure compliance to codes, standards, regulations, equipment specifications, and process equipment operating targets
Report to Electrical Lead of Project Delivery department

Fulltime

Electrical Engineer II, RF Test Engineer

As an RF Test Engineer, your work will be essential in ensuring that the wireles...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, RF Engineering or similar discipline
Minimum of 3 years of hands-on RF and wireless device testing experience
Minimum of 3 years of wireless device test plan development for evaluating performance of various wireless interfaces against system and product requirements
Solid understanding of basic RF principles and theory, familiar with basic RF technology circuitry stages and topologies
Experience with modern RF technology including multiband Wi-Fi, Bluetooth, Cellular (LTE, 5G FR1), and multi-constellation GNSS and their test methodologies
Cellular experience is a must-have
High level of familiarity of cellular certification processes, test requirements, and test methods (PTCRB, CTIA, GCF, Carrier testing, etc), with hands on experience with device pretesting
Familiarity of worldwide EMC and intentional radiator regulatory standards and test methods (FCC, CE, ETSI, etc)
Proficient with operation of RF equipment such as RF communication testers (CMW, CMX, Litepoint), Network Analyzers, Spectrum Analyzers, RF power meters, Signal Generators, RF Test chambers
Experience with collaborative RF debug at device and circuit level

Job Responsibility

Design and implement test plans to evaluate the performance of wirelessly connected devices, ensuring they meet stringent product and regulatory requirements
Record RF test data and organize results, creating clear, actionable reports
Present findings and recommendations to cross-functional teams, enabling swift resolution of design challenges
Evaluate RF performance characteristics such as Total Radiated Power (TRP), Total Isotropic Sensitivity (TIS), and other over-the-air (OTA) metrics for cellular-enabled wireless devices using advanced equipment
Use instruments like spectrum analyzers and radio communication testers to assess conducted performance of wireless technologies, including LTE, 5G, Wi-Fi, Bluetooth, and GNSS
Support product field evaluations to validate RF performance under diverse real-world conditions, such as urban or rural environments
Investigate and debug issues such as poor sensitivity, low transmit power, or signal interference in wireless devices
Assist in the regulatory pre-certification and formal certification test efforts for hardware by preparing test samples, working closely with external test labs, troubleshooting issues, and ensuring successful completion of certification activities
Expand your knowledge of RF systems, testing methodologies, and certification standards while working closely with experienced engineers to develop your technical expertise and contribute to innovative designs

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs

Fulltime

Electrical Professional Engineer or Senior Electrical Designer

Perform as a critical design team member in electrical systems development and c...

Location

United States , Phoenix

Salary:

Not provided

LSW Engineers Arizona, Inc.

Expiration Date

Until further notice

Requirements

Registered PE in the State of Arizona
Bachelor’s Degree from an ABET accredited engineering program (Architectural Engineering Degree preferred)
Excellent skills designing electrical systems: Lighting and control, power, power distribution, HVAC coordination, food service equipment coordination, fire alarm, etc.
Working knowledge of current versions of Revit and AutoCAD
Ability to apply logic, reasoning, and organizational skills to structure concepts & ideas into deliverables
Working knowledge of COMcheck and applicable energy codes
Working knowledge with NEC and NFPA Code Standards
Working knowledge of Excel, OneNote, Word, etc.
Excellent oral and written communication skills
Ability to work well within a team structure

Job Responsibility

Apply strong technical design skills and knowledge to produce accurate and timely project deliverables
Support project requirements with client interface, field investigation, basis of design narratives, development of electrical construction design documents that comply with all applicable codes and standards, review submittals, and support the project through construction completion
Design projects in Revit and AutoCAD for compliance with city, state, and national building codes, compliance with owner standards, and industry construction standards (NEC, NFPA, IECC, IBC, LEED, etc.)
Provide design information and effectively delegate work to production support staff as applicable
Provide a leadership role to share your knowledge with other design staff
Meet with and interact with clients and project stakeholders
Communicate with manufacturers and contractors to stay abreast of the latest trends and electrical systems technology
Coordinate and perform construction administration tasks internally & externally, enabling a successful project outcome

What we offer

Competitive wages
Employer funded profit sharing plan
401k plan with employer safe-harbor contributions
Excellent work environment
Opportunity to expand and improve professional skills

Instrumentation Engineer – Process Automation and Electrical Engineering

Instrumentation engineer is responsible for activities related to its discipline...

Location

Italy , Milan

Salary:

Not provided

EUROTECNICA Contractors and Engineers S.p.A.

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Automation/Electrical engineering or Bachelor’s Degree in Chemical engineering
Minimum +2/3 years of work experience in engineering design in Oil & Gas or Power sectors is preferred
Proactivity, sense of initiative, ability to work independently and in a team
Fluent in Italian and English (written and spoken)
Availability to short and long term national and international business trips

Job Responsibility

Develop the discipline deliverables such as: Technical specifications / data sheets for field and control room instrumentation
Sizing and calculation of flow elements, control, and safety valves
Process hook-up sketches and relevant bill of materials
Interconnecting and wiring diagrams
Instrumentation cabling, wiring, junction boxes, power supply and distribution, UPS, and associated TCP/IP, SCADA, Modbus networking (switches, routers, Ethernet, fiber optics, etc.)
Cause & effect matrices
Interlock and control logic diagrams
Interlock and control narratives
Distributed Control Systems (DCS)
Safety Instrumented Systems (SIS)

Fulltime

Electrical Works Engineer

YPERO S.A.

Location:
Poland , Skórzewo

Category:
Construction

Contract Type:
Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
February 21, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Electrical Works Engineer

Electrical Engineer – Process Automation and Electrical Engineering