CrawlJobs Logo

Electrical Engineer, Journeyman

dcscorp.com Logo

DCS Corporation

Location Icon

Location:
United States , Ogden

Category Icon

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided

Job Description:

DCS has an exciting opportunity for an Electrical Engineer to support the Air Force Life Cycle Management Center/PEO Digital Directorate (AFLCMC/ESDI). In this Advisory and Assistance Services (A&AS) role, you will provide expert-level support to Department of Defense (DoD) programs by assisting government leadership with decision-making, planning, and execution throughout the acquisition lifecycle. You will apply your technical and/or professional expertise to ensure compliance with applicable policies and regulations, contribute to mission success, and help deliver critical capabilities to the warfighter. In this position you will provide Electrical Engineering support for programs and projects. Support involves all the system engineering research, design, development, installation, testing, and operation aspects of the systems under the responsibility of the IPT.

Job Responsibility:

  • Provide system engineering review and analysis of assigned systems throughout all acquisition phases
  • Assist in translating DoD user requirements into system requirements for design, development, fabrication, testing, and evaluation of systems, subsystems, and equipment
  • Develop and refine features to improve, extend, or validate current methods, data, or techniques
  • Review overall system design baseline (architecture and interoperability) requirements
  • Assist in the development of system specifications and architecture products
  • Perform independent analysis of engineering changes, specifications, and vendor proposals, providing recommendations to Government points of contact
  • Support life cycle cost evaluations of proposed systems and components
  • Provide test and evaluation support, including planning, execution, and analysis, and participate in Integrated Test Teams, Test Readiness Reviews, and related program events
  • Schedule and secure test resources to meet program office objectives
  • Monitor and report on test and evaluation (T&E) activities across all systems
  • Support design, planning, analysis, reporting, and documentation during any T&E phase, including applicable certifications and procedures
  • Contribute to technical plans by reviewing documents, supporting working groups, tracking risk and issue resolution, and conducting special studies to define alternative approaches
  • Support Foreign Military Sales activities as required

Requirements:

  • U.S. Citizenship is required
  • Must hold an active Secret clearance
  • Bachelor’s Degree in a professional engineering discipline and at least 5 years of experience in the respective technical / professional discipline being performed, 3 of which must be in the DoD, OR 7+ years of directly related experience, 5 of which must be in the DoD
  • Experience and/or training in the following electrical engineering areas: Design, development, and circuit analysis
  • RF chain sub-specialties (antenna design, high power transmitters/amplifiers, receiver processing, etc.)
  • Electro-mechanical controls
  • Modeling and simulation
  • Test and evaluation
  • Technical data package development and sustainment
  • Principles of configuration management
  • DoD Acquisition processes
  • Familiarity with Electronic Warfare and/or Air Combat operations, including live aircrew training, TTP development, and Range Infrastructure architectures/systems
  • Familiarity with foreign ground radar intelligence or application to DoD systems

Nice to have:

  • Master’s Degree in a professional engineering discipline and at least 3 years of experience in the respective technical / professional discipline being performed, 3 of which must be in the DoD
  • Degree from an ABET-accredited educational program
  • Strong knowledge of electrical engineering design, analysis, and evaluation methods
  • Proficiency in test planning, execution, and evaluation methodologies
  • Familiarity with RF systems, electro-mechanical controls, and configuration management
  • Understanding of DoD acquisition and test policies

Additional Information:

Job Posted:
December 26, 2025

Employment Type:
Fulltime
Work Type:
On-site work
Job Link Share:

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Electrical Engineer, Journeyman

Engineer IV

Engineer IV position at Fort Lauderdale Marriott Harbor Beach Resort & Spa, resp...
Location
Location
United States , Fort Lauderdale
Salary
Salary:
Not provided
https://www.marriott.com Logo
Marriott Bonvoy
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or G.E.D. equivalent
  • Certificate in two-year technical diploma program for HVAC/refrigeration
  • Extensive experience and training in general maintenance (advanced repairs), electrical or refrigeration, exterior and interior surface preparation and painting
  • At least 2 years of hotel engineering/maintenance experience
  • Valid Driver's License
  • License or certification in refrigeration or electrical (earned, or currently working towards receiving)
  • Universal Chlorofluorocarbon (CFC) certification
  • Must meet applicable state and federal certification and/or licensing requirements
Job Responsibility
Job Responsibility
  • Respond and attend to guest repair requests
  • Communicate with guests/customers to resolve maintenance issues
  • Perform preventive maintenance on tools and equipment, including cleaning and lubrication
  • Visually inspect tools, equipment, or machines
  • Carry equipment (e.g., tools, radio)
  • Identify, locate, and operate all shut-off valves for equipment and utility shut-offs for buildings
  • Maintain maintenance inventory and requisition parts and supplies as needed
  • Assure each day's activities and problems that occur are communicated to the other shifts
  • Display thorough knowledge of building systems, emergency response, and building documentation including reading standard blue prints and electrical schematics concerning plumbing and HVAC
  • Display advanced engineering operations skills and general mechanical ability
  • Fulltime
Read More
Arrow Right

Electrical Superintendent

CPG is currently seeking an Electrical Superintendent in DFW. Craft Performance ...
Location
Location
United States , Dallas
Salary
Salary:
Not provided
andresconstruction.com Logo
ANDRES Construction Services
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 3+ years in supervisory position with Journeyman License
  • Active Texas Journeyman Electrician license
  • Physical duties are a primary part of this role (more than 70%)
  • Duties may include crawling, standing, stooping, bending, crouching, kneeling, sitting, and reaching
  • Must be able to routinely lift heavy objects in excess of 50 pounds
  • pushing and pulling of objects also required
  • Must be able to travel to different project locations within the metroplex as needed
  • Job requires working in all elements, specifically related to hot, cold, or wet weather
  • Able to work 8-10 hours per day/40 hours per week, as well as overtime and potential night shifts as required
  • Repetitive use of arms, hands, and fingers
Job Responsibility
Job Responsibility
  • Personally exhibit and mentor others to foster our culture guided by Core Values
  • Advocate safety as number one priority on the jobsite and enforce compliance with company/jobsite safety plan, policies, and all safety-related regulations
  • Assist in change orders/change events
  • Manage material and submit purchase orders
  • Supervise the operations on the construction sites
  • Monitor the short-term schedule
  • Reviews, and supports the hiring needs
  • Quality control & coordination responsibilities with other trades
  • Ability to assist Project Manager prepare construction schedules
  • Make daily schedules for proper manpower utilization
What we offer
What we offer
  • Medical
  • Dental
  • Vision
  • 401K & ESOP retirement plan participation
  • Vacation
  • Paid holidays
  • Company vehicle with gas card
  • Fulltime
Read More
Arrow Right

Senior Electrical Estimator

The Senior Electrical Estimator is responsible for leading the preparation of co...
Location
Location
United States , Little Rock
Salary
Salary:
Not provided
lexicon-inc.com Logo
Lexicon, Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 10+ years of estimating experience in electrical contracting
  • Journeyman Electrician license or Electrical Engineering degree preferred
  • Proficiency with Accubid, ConEst, or similar electrical estimating software
  • Deep understanding of NEC and industry best practices
  • Strong vendor and subcontractor network
  • You must be legally authorized to work in the United States for our company without the need for current or future visa sponsorship
Job Responsibility
Job Responsibility
  • Prepare detailed cost estimates for power distribution, lighting, fire alarms, low-voltage, and control systems
  • Interpret electrical drawings, specifications, and scope documents
  • Evaluate labor, material, and subcontractor costs using standard productivity rates
  • Solicit and analyze vendor and subcontractor proposals
  • Participate in design-build and value-engineering processes
  • Conduct quantity takeoffs using digital estimating tools
  • Collaborate with project managers and engineers to align scope and budgets
  • Maintain current knowledge of electrical codes and industry standards
  • Provide mentorship and training to junior estimating staff
What we offer
What we offer
  • Medical Insurance
  • HSA with Employer contributions
  • Dental Insurance
  • Vision Insurance
  • Group and Voluntary Life Insurance
  • Short Term/Long Term Disability
  • Critical Illness Plan
  • Employee Assistance Program
  • Paid Vacation
  • 401(k) with Employer Match
  • Fulltime
Read More
Arrow Right

Electrical Engineer, Journeyman

DCS has an exciting opportunity for an Electrical Engineer to support the Air Fo...
Location
Location
United States , Ogden
Salary
Salary:
Not provided
dcscorp.com Logo
DCS Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • U.S. Citizenship is required
  • Must hold an active Secret clearance
  • Bachelor’s Degree in a professional engineering discipline and at least 5 years of experience in the respective technical / professional discipline being performed, 3 of which must be in the DoD, OR 7+ years of directly related experience, 5 of which must be in the DoD
  • Experience and/or training in the following electrical engineering areas: Design, development, and circuit analysis
  • RF chain sub-specialties (antenna design, high power transmitters/amplifiers, receiver processing, etc.)
  • Electro-mechanical controls
  • Modeling and simulation
  • Test and evaluation
  • Technical data package development and sustainment
  • Principles of configuration management
Job Responsibility
Job Responsibility
  • Provide system engineering review and analysis of assigned systems throughout all acquisition phases
  • Assist in translating DoD user requirements into system requirements for design, development, fabrication, testing, and evaluation of systems, subsystems, and equipment
  • Develop and refine features to improve, extend, or validate current methods, data, or techniques
  • Review overall system design baseline (architecture and interoperability) requirements
  • Assist in the development of system specifications and architecture products
  • Perform independent analysis of engineering changes, specifications, and vendor proposals, providing recommendations to Government points of contact
  • Support life cycle cost evaluations of proposed systems and components
  • Provide test and evaluation support, including planning, execution, and analysis, and participate in Integrated Test Teams, Test Readiness Reviews, and related program events
  • Schedule and secure test resources to meet program office objectives
  • Monitor and report on test and evaluation (T&E) activities across all systems
  • Fulltime
Read More
Arrow Right

Electrical Supervisor

As an Electrical Supervisor, you will play a crucial part in all electrical aspe...
Location
Location
United States , Kermit; Monahans
Salary
Salary:
Not provided
atlas.energy Logo
Atlas Energy Solutions
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or GED required
  • Journeyman Electrical License with minimum 5 years industrial experience
  • Minimum 5 years field leadership in industrial electrical
  • Regularly required to use hands to finger, handle, or feel
  • reach with hands and arms
  • and talk or hear
  • Required to stand
  • walk
  • and stoop, kneel, crouch or crawl, sit and climb or balance
  • Must regularly lift and/or move up to ten pounds, frequently lift and/or move up to fifty pounds, and occasionally lift and/or move more than one hundred pounds
Job Responsibility
Job Responsibility
  • Lead your team in safety complying with OSHA, MSHA, and Atlas policies and procedures
  • Work with outside Engineering firms to design new electrical equipment
  • Travel to various vendor locations and for audits and meetings. This will be more so during the design and construction phase
  • Review, understand, redline, and update electrical schematics, drawings, one lines, e-houses layouts, etc.
  • Lead a team of field electricians on day-to-day task such as inspections, PMs, trouble shooting, reporting, etc.
  • Review and approve time sheets, vacation request, POs and invoices
  • Attend training and certification courses required by the company
  • Developing, maintaining, and reporting on budgets both for OPEX and CAPEX
  • Engaging with third party vendors for quotes and lead times
  • Comply with OSHA and MSHA standards and annual testing on electrical equipment
What we offer
What we offer
  • Room and board provided at or near the location of the job
  • 100% covered Medical, Dental, and Vision
  • 401K with company match, immediate vesting
  • Paid time off (non-rotational roles), 15+ company paid holidays
  • Fulltime
Read More
Arrow Right

Industrial Electrical Technician 2

Overview About M.C. Dean M.C. Dean is Building Intelligence. We design, build, o...
Location
Location
United States , Washington, DC
Salary
Salary:
30.00 - 40.00 USD / Hour
mcdean.com Logo
M.C. Dean, Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Candidates must be certified and experienced as a DC Journeyman or Master Electrician, or possess the qualifications necessary to obtain one
  • A valid DC Journeyman or Master Electrician license is a mandatory requirement and must be obtained prior to hiring
  • A high school diploma or GED, along with 4+ years of progressive, hands-on experience in facilities maintenance or complex mission-critical environments, is required
  • This experience must include in-depth knowledge of electrical systems, controls, generators, and life safety systems
  • Strong expertise in industrial electrical systems and control equipment
  • Proficiency in interpreting blueprints, schematics, and technical drawings
  • Ability to manage and prioritize workload effectively with minimal supervision
  • Minimum of three years of experience in industrial settings, preferably with specific expertise in infrared thermography
  • Ability to lift, carry, and move objects weighing up to [50 pounds] on a regular basis
  • Relocates a 12 foot stepladder without assistance
Job Responsibility
Job Responsibility
  • Perform maintenance, troubleshooting, repair, and installation of industrial electrical equipment
  • Conduct tests and inspections to ensure proper functioning and safety of electrical systems
  • Utilize infrared thermography for predictive maintenance, identifying potential issues before they lead to equipment failure
  • Interpret and work from blueprints, schematics, and technical drawings
  • Adhere to all safety protocols and regulations, ensuring compliance with NFPA, NEC, and other relevant standards
  • Maintain accurate records of work performed, including reports on inspections, tests, and repairs
  • Collaborate with other technicians and engineers to resolve complex electrical issues
  • Perform complete corrective and preventative maintenance, testing and calibration of equipment, systems, associated devices, and controls
  • Recommend changes to job plans and job tasks to increase productivity and equipment reliability
  • Perform complete installations of various types of electrical equipment, utilizing basic electrical, and mechanical skills as necessary
What we offer
What we offer
  • Medical, dental, vision, life, and disability insurance
  • Paid-time off
  • Tuition reimbursement
  • 401k Retirement Plan
  • Military Reserve pay offset
  • Paid maternity leave
  • Fulltime
Read More
Arrow Right

Electrical Quality Assurance Specialist

The Electrical Quality Assurance Specialist at Power Design is an essential part...
Location
Location
United States , St Petersburg
Salary
Salary:
Not provided
powerdesigninc.us Logo
Power Design
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Electrical Journeyman License required
  • A team player who thrives in a constantly changing and evolving environment with electrical design or electrical field experience
  • A quick learner interested in design fundamentals for electrical systems
  • Someone with working knowledge of electrical codes (such as IBC, IECC, NEC, ASHRAE) and electrical system calculations
  • An excellent communicator who is able to read and interpret blueprints, submittals and specifications
  • Demonstrate and uphold all of Power Design’s core values, which include integrity, accountability, teamwork, innovation and growth
Job Responsibility
Job Responsibility
  • Review electrical system designs of large-scale projects for code compliance and constructability issues
  • With design direction, support and guidance from all team members, review drawings to ensure quality and constructability
  • Coordinate the best design solutions for electrical systems by applying industry knowledge and quality standards
  • Applying code knowledge to power and lighting systems. May include some telecom and fire alarm review
  • More advanced reviews may include photometric studies, short circuit analysis and voltage drop calculations
Read More
Arrow Right

Building Engineer

POSITION SUMMARY: Respond and attend to guest repair requests. Communicate with ...
Location
Location
United States
Salary
Salary:
Not provided
https://www.marriott.com Logo
Marriott Bonvoy
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Valid Driver’s License
  • License or certification in refrigeration or electrical (earned, or currently working towards receiving)
  • Universal Chlorofluorocarbon (CFC) certification
  • Must meet applicable state and federal certification and/or licensing requirements
  • High school diploma or G.E.D. equivalent
  • Certificate in two-year technical diploma program for HVAC/refrigeration
  • Extensive experience and training in general maintenance (advanced repairs), electrical or refrigeration, exterior and interior surface preparation and painting
  • At least 2 years of hotel engineering/maintenance experience
Job Responsibility
Job Responsibility
  • Respond and attend to guest repair requests
  • Communicate with guests/customers to resolve maintenance issues
  • Perform preventive maintenance on tools and equipment, including cleaning and lubrication
  • Visually inspect tools, equipment, or machines
  • Carry equipment (e.g., tools, radio)
  • Identify, locate, and operate all shut-off valves for equipment and utility shut-offs for buildings
  • Maintain maintenance inventory and requisition parts and supplies as needed
  • Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards
  • Display thorough knowledge of building systems, emergency response, and building documentation including reading standard blue prints and electrical schematics concerning plumbing and HVAC
  • Display advanced engineering operations skills and general mechanical ability
  • Fulltime
Read More
Arrow Right