CrawlJobs Logo

Construction Instrumentation Supervisor

met-ts.co.uk Logo

Met T&S

Location Icon

Location:
United Arab Emirates , Al Ruwais, Abu Dhabi

Category Icon
Category:

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided

Job Description:

In home office (whenever possible) he/she shall cooperate with the project team for constructability and feasibility studies, with APPAL for technical tabulation of the civil bidders’ proposals and clarification meeting with the bidders, with civil department to analyze/define the work requisition to be included in the subcontractor scope of Work. Each supervisor reports to the construction manager. He/she directs subcontractor activities for his own discipline, ensuring that plant construction works are performed according to the erection schedules and project documents, within the assigned cost budget, and according to quality & safety procedures, as well as according to the terms and conditions of the subcontract. Should have experience in Pre-Installation and Erection stages. One or more assistants may support him/her.

Job Responsibility:

  • Prior to the start of works, to check the supplier’s material and technical documentation delivery schedule
  • Check that the same is in line with construction schedules and contractual commitments
  • Prior to the start of works, control and approve the method statements submitted by the subcontractors ensuring their correct application on the field
  • He/she ensures the implementation of all the HSE procedures and standards for the areas or activities (subcontractors) of responsibilities
  • He/she directly participates to the HSE activities at site as defined for his position in the site HSE plan and related procedures
  • To check that the said schedule is kept to, and to promote action to recover any delay
  • To check that the equipment and manpower employed by the subcontractor are adequate and that the works performed by the subcontractor conform to design documents, safety regulations, and to the quality level fixed by the same
  • Perform inspections and sign the necessary certificates as per site inspection plans
  • To prepare the non-conformity register for each subcontractor and coordinate nonconformity resolution
  • To detect any design errors, and where possible rectify the same or request the Site engineer to make the necessary changes
  • To check Subcontractors’ work progress status sheets and sign the same for approval
  • To manage vendor specialists
  • To assist the contract manager/engineer in defining new prices, in preparing amendments to subcontracts and in analyzing and discussing claims

Requirements:

  • A Bachelor’s Degree or Diploma in Instrumentation Engineering courses
  • Minimum of 10 year's work experience
  • Significant experience in in a similar position on EPC Oil & Gas projects/ Refinery
  • Excellent communications and interpersonal skills
  • Attention to detail, management skills
  • Team-oriented skills, self-motivation and direction, with strong bias toward timely performance and problem resolution

Additional Information:

Job Posted:
December 10, 2025

Employment Type:
Fulltime
Work Type:
On-site work
Job Link Share:

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Construction Instrumentation Supervisor

Electrical Supervisor

We’re hiring an Electrical Supervisor to play a vital role in delivering some of...
Location
Location
United Kingdom , Grimsby
Salary
Salary:
28.00 GBP / Hour
technicaltd.com Logo
TECHNICA
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 18th Edition Wiring Regulations
  • Recognised professional qualification in electrical Installation – NVQ Level 3 C&G or equivalent
  • At least 5 years’ experience in industrial installation
  • Full UK driving license
  • Be prepared to work away from home for up to 80% of the year
  • Ability to think on your feet and be self-motivated to deliver excellent service
Job Responsibility
Job Responsibility
  • Supervise site and team members
  • Fault find and repair electrical instrumentation systems
  • Test installations
  • Interpret engineer drawings, schedules, and vendor specifications
  • Liaise with clients, contractors and appropriate authorities
  • ‘Red pen’ construction drawings and documentation
  • Lead a team or work as part of a larger team to ensure work is completed on time and to Technica quality standards
  • Adhere to client regulations and standards
  • Be an ambassador for our company
  • Ensure Technica values and standards are maintained
What we offer
What we offer
  • Overtime paid at time and a half after 38 hours including travel time
  • Saturdays: First 5 hours at time and a half, double time thereafter
  • Sundays: Double time
  • Daily subsistence provided
  • Transport to & from site (from Grimsby Head Office)
  • 25 days holiday + bank holidays
  • Private healthcare (plus family options)
  • Company pension
  • Death in Service & Critical Illness cover
  • Recognition scheme & genuine commitment to your development
  • Fulltime
Read More
Arrow Right

Commissioning Supervisor

Commissioning Supervisor executes the activities pertaining to the pre-commissio...
Location
Location
United Arab Emirates , Al Ruwais, Abu Dhabi
Salary
Salary:
Not provided
met-ts.co.uk Logo
Met T&S
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • University degree or diploma in relevant discipline or equivalent
  • Significant experience in the industrial construction of large or xl gas plants
  • Covered a similar role in at least 2-3 projects of comparable size
  • A minimum of 12 years of relevant experience
  • Excellent communications and interpersonal skills
  • Attention to detail, management skills
  • Team-oriented skills, self-motivation, and direction, with strong bias toward timely performance and problem resolution
Job Responsibility
Job Responsibility
  • To develop the detailed pre-commissioning procedures according to the instructions of commissioning manager or commissioning superintendent
  • To field check the DAC and prepare relevant commissioning punch list, following the CME instructions
  • To assure that all activities such as flushing / blowing, reinstatement of piping components and local instruments, leak test, motor run-in, machinery run-in, static equipment inspections, cleaning, internals installations, box-up are duly performed in accordance with the stated procedures, in conformity with the safety rules and as per the instructions of commissioning manager or commissioning superintendent
  • To organize and manage the operations in field of the assigned team from the sub-contractor by controlling their job and the implementation of plant safety procedures in case of emergency
  • Support the vendors’ specialists in the execution of the job and coordinate their actions with the commissioning supervisors
  • Supervise the works of vendors’ specialists and ensure their efficient utilization
  • To keep records of all activities performed in the logbook
  • To produce the certificates, duly signed by the involved parties, and handover to certification engineer (QA/QC)
  • Can be the authorized person designated by the site manager to receive or issue a permit to work according to the project permit to work procedure
What we offer
What we offer
  • Single Status
  • Accommodation provided by the company
  • Transportation provided by the company
  • Round trip ticket on each rotation (Economy class)
  • Fulltime
Read More
Arrow Right
New

Site Water & Utilities Area Construction Lead

Site Water & Utilities Area Construction Lead for a client. Location: North Ruma...
Location
Location
Iraq , North Rumaila
Salary
Salary:
Not provided
lobelia.earth Logo
Lobellia
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Diploma/Degree in electrical and instrumentation disciplines
  • Minimum 10-15+ years of experience in Oil & Gas Industry or Heavy industries with similar large scale projects and context in Contract, Engineering and Construction activities for Onshore (or Onshore yards) projects
  • Proven track records of several successful assignments on similar site positions
  • Broad and versatile (disciplines wise) technical experience across all aspects of major Surface Facilities project development
  • Sound knowledge and experience in Engineering and Project Control for Onshore and Nearshore projects is considered a plus
  • Vast and concrete knowledge of monitoring of large Oil&Gas EPC Contractors at site
  • Ability to adapt and to represent the company in discussions and meetings with contractors and stakeholders
  • Ability to embrace and closely monitor Environmental, Social Performances and Security requirements as critical aspects of the Site Project Execution
  • Proven records of ability to effectively integrate a team and adhere to team-spirit rules. Demonstrate sound organization ability and work in a multi-cultural/international business environment
  • Strong Leadership Good interpersonal and communication skills
Job Responsibility
Job Responsibility
  • Be a proactive and team-spirit driven member of the CPF-2 Site Construction team
  • Participate to the review and approval of site construction procedures/method statements. Identify and make recommendations as to areas for improvement in constructability related issues
  • Coordinate the supervision of construction activities with all required disciplines Supervisors of the CPF-2 Site Construction (functional link with these Supervisors)
  • Define construction progress priorities and identify specific concerns
  • Monitor and track the construction progress. Provide inputs and report issues to the CPF-2 Site Construction and Project Support team
  • Ensure Contractors compliance to the technical and safety/environmental Contract requirements
  • Maintain good relationships with Contractors, being flexible enough where relevant (strive to achieve value at every opportunity) but also enforce rigorously procedures when required
  • Check fitness of the Contractors construction equipment (report any HSE issues) and adequacy of Contractor personnel mob/demob for each activities he is in charge of supervising
  • Facilitate the management/resolution of short-term co-activities issues
  • Provide inputs to the field engineering group to ensure timely resolution of engineering issues that materialize at Site level
  • Fulltime
Read More
Arrow Right

Construction Supervisor (Elect & Instr)

Location
Location
Qatar , Doha
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Higher National Certificate (HNC) / Higher National Diploma (HND) / Diploma in Instrumentation, Electrical, and/or Mechanical Engineering from a recognized institution
  • Extensive commissioning experience in oil & gas projects
  • Strong skills in construction management, communication, and conflict resolution
  • 8–10 years of experience in construction and installation activities within the oil & gas industry
  • Knowledge and experience in implementing construction industry best practices, systems, processes, and standards
  • Basic understanding of telemetry installation and commissioning
  • Familiarity with construction techniques for brownfield environments and offshore structures
  • Experience across Electrical, Telecom, Telemetry and related disciplines within offshore oil & gas projects
  • Computer literate with good communication and reporting skills
  • Strong understanding of engineering standards, quality control, safety, and environmental requirements
Job Responsibility
Job Responsibility
  • Act as the company representative onboard offshore facilities or contractor marine spread for all assigned project activities
  • Coordinate and liaise with facility asset holders regarding site access and preparation requirements for construction and hot work activities
  • Supervise contractors during Electrical, Instrumentation, Fire & Gas, DCS, ESD, and Telecom construction activities at offshore work sites
  • Participate in the review of design drawings, method statements, and material receipt inspections
  • Monitor and verify Electrical, Instrumentation, and Telecom material receipt inspections in accordance with drawings, standards, and specifications
  • raise reports for damaged or missing materials
  • Prepare work permits as the Permit Applicant and ensure adherence to all relevant permit-to-work system requirements
  • Attend daily planning and progress meetings with asset holders and provide updates on work progress and constraints
  • Coordinate with contractor representatives for offshore logistics, including personnel and material movement according to schedule
  • Review contractor construction plans, schedules, method statements, and job hazard analyses
Read More
Arrow Right

Senior Electrical Engineer

We are looking for an experienced Senior Electrical Engineer to join the Electri...
Location
Location
Australia , Osborne Park
Salary
Salary:
Not provided
primero.com.au Logo
Primero Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor of Electrical Engineering (recognised by IEAust)
  • 5+ years’ experience within Electrical Engineering (both project & design)
  • Knowledge and practical application of relevant industry codes of practice
  • Knowledge and practical application of design theories, principles and practices
  • Strong level of expertise in technical detail of Electrical Engineering
  • Knowledge and previous demonstrated experience as a Project Engineer working on construction and commissioning projects in Australia (and overseas)
  • Proven ability to work efficiently and effectively within a multi-discipline environment
  • Proven ability to work autonomously or as a part of team
  • Strong problem-solving and planning skills
  • Demonstrate previous site experience on a major mining/energy construction project
Job Responsibility
Job Responsibility
  • Proactively communicate with the electrical superintendents, electrical supervisors and senior engineers and stay abreast of project communication to autonomously develop and manage work tasks and priorities
  • Communicate with the electrical supervisors and leading hands to understand daily construction progress and capture in the QMR to support project tracking
  • Read and interpret specifications, technical drawings, schematics, and any other engineering documentation /report
  • Perform calculations for site modification and general site engineering problem solving using engineering formulas and skills with assistance from Perth office
  • Compile and maintain workpacks of relevant electrical design information to support construction works by the site electrical team e.g drawings, cable schedules, model shots
  • Provide technical support to the electrical supervisors, leading hands and electricians for execution of the workpacks
  • Communicate with the design team to resolve issues identified with design information in preparing and executing workpacks
  • Communicate with the planning team to resolve issues identified with data entry into QMR
  • Redline markup design information with site as constructed information where there are differences
  • Provide engineering support to close out completion of construction activities e.g. participate in walkdowns, ITRs and punch lists documentation
What we offer
What we offer
  • Competitive Compensation
  • Flexible Working Arrangements
  • Career Opportunities
  • Paid Parental Leave
  • Health and Wellbeing Support
  • Benefits & Discounts
  • Employee Referral Rewards
  • Fulltime
Read More
Arrow Right

Senior Electrical Engineer

We are looking for an experienced Senior Electrical Engineer to join the Electri...
Location
Location
Australia , Osborne Park
Salary
Salary:
Not provided
primero.com.au Logo
Primero Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor of Electrical Engineering (recognised by IEAust)
  • 5+ years’ experience within Electrical Engineering (both project & design)
  • Knowledge and practical application of relevant industry codes of practice
  • Knowledge and practical application of design theories, principles and practices
  • Strong level of expertise in technical detail of Electrical Engineering
  • Knowledge and previous demonstrated experience as a Project Engineer working on construction and commissioning projects in Australia (and overseas)
  • Proven ability to work efficiently and effectively within a multi-discipline environment
  • Proven ability to work autonomously or as a part of team
  • Strong problem-solving and planning skills
  • Demonstrate previous site experience on a major mining/energy construction project
Job Responsibility
Job Responsibility
  • Proactively communicate with the electrical superintendents, electrical supervisors and senior engineers and stay abreast of project communication to autonomously develop and manage work tasks and priorities
  • Communicate with the electrical supervisors and leading hands to understand daily construction progress and capture in the QMR to support project tracking
  • Read and interpret specifications, technical drawings, schematics, and any other engineering documentation /report
  • Perform calculations for site modification and general site engineering problem solving using engineering formulas and skills with assistance from Perth office
  • Compile and maintain workpacks of relevant electrical design information to support construction works by the site electrical team e.g drawings, cable schedules, model shots
  • Provide technical support to the electrical supervisors, leading hands and electricians for execution of the workpacks
  • Communicate with the design team to resolve issues identified with design information in preparing and executing workpacks
  • Communicate with the planning team to resolve issues identified with data entry into QMR
  • Redline markup design information with site as constructed information where there are differences
  • Provide engineering support to close out completion of construction activities e.g. participate in walkdowns, ITRs and punch lists documentation
What we offer
What we offer
  • Competitive Compensation
  • Flexible Working Arrangements
  • Career Opportunities
  • Paid Parental Leave
  • Health and Wellbeing Support
  • Benefits & Discounts
  • Employee Referral Rewards
  • Fulltime
Read More
Arrow Right

Instrument & Control Supervisor

Instrument & Control Supervisor Coordinate offshore Brownfield, Shutdown & Hook?...
Location
Location
Qatar , Doha
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High national diploma
  • 8 years of experience with Large Projects in Construction related disciplines (e.g., construction, installation, fabrication, execution, completion, hook-up, etc.) in the Oil & Gas Industry
  • Experience with Oil and Gas companies, contractors, service companies, or heavy offshore execution construction companies
  • Knowledge of design standards, specifications, codes, and appropriate safety criteria related to major fabrication, transport, installation, Brownfield Execution & Commissioning and Hook-up, as applicable to the project scope
  • Knowledge of offshore facilities and structures, operations as applicable to a project scope
  • Knowledge of execution methods and risks associated with sour gas and LNG production facilities
  • Experience working in large-scale operating organizations in Operations, Projects, Subsurface, etc.
Job Responsibility
Job Responsibility
  • Coordinate offshore Brownfield, Shutdown & Hook-up Instrument & Control discipline representing the COMPANY, ensuring compliance with Safety, quality, integrity and project objectives
  • Coordinate with OESS & Operation and Contractors to drive efficient Brownfields and Hook-up execution & Commissioning and deliver operational excellence during offshore execution phase
Read More
Arrow Right

Commissioning Instrument Supervisor

The Commissioning Instrument Supervisor executes the activities pertaining to hi...
Location
Location
United Arab Emirates , Al Ruwais, Abu Dhabi
Salary
Salary:
Not provided
met-ts.co.uk Logo
Met T&S
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • University degree or diploma in relevant discipline or equivalent
  • Significant experience in the industrial construction of large or xl gas plants
  • Covered a similar role in at least 2-3 projects of comparable size
  • A minimum of 12 years of relevant experience
  • Excellent communications and interpersonal skills
  • Attention to detail, management skills
  • Team-oriented skills, self-motivation, and direction, with strong bias toward timely performance and problem resolution
Job Responsibility
Job Responsibility
  • Execute the activities pertaining to his discipline by means of the Instrumental Specialists under his responsibility
  • Develop the detailed pre-commissioning procedures for Instrument Items & Packages, procedures for the functional tests of the Instrument Items
  • Coordinate the activities of the Instrumental specialist CIA, CLC
  • Field check the DAC and prepare relevant Commissioning punch list
  • Monitor and ensure the activities are carried out in accordance with the procedures and requirements
  • Organize and manage the operations in field of the assigned team from the Subcontractor
  • Support the Vendors specialists in the execution of the job and coordinate their actions with the Commissioning supervisors
  • Supervise the works of vendors’ specialists and ensure their efficient utilization
  • Ensure all safety rules are in force and are followed in field
  • Keep records of all activities performed in the log book
What we offer
What we offer
  • Single Status
  • Accommodation provided by the company
  • Transportation provided by the company
  • Round trip ticket on each rotation (Economy class)
  • Fulltime
Read More
Arrow Right